[PATCH 1/4] mx31_3ds: Remove unused debug board definitions

[jason77.wang@gmail.com (Jason Wang)]

Looks fine to me, These stuffs should be removed earlier. :-)

Rogerio Pimentel wrote:
> In commit (c5d38f08): "mx31_3ds: revert 3ds debug board relate code"
> the debug board definitions are placed in a separate file.
>
> Remove the remaining debug board related define from mach-mx31_3ds.c.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
>
> ---
>  arch/arm/mach-mx3/mach-mx31_3ds.c |   30 ------------------------------
>  1 files changed, 0 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c
> b/arch/arm/mach-mx3/mach-mx31_3ds.c
> index 6fe69e1..bc21efc 100644
> --- a/arch/arm/mach-mx3/mach-mx31_3ds.c
> +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
> @@ -38,39 +38,9 @@
>  #include "devices-imx31.h"
>  #include "devices.h"
>
> -/* Definitions for components on the Debug board */
> -
> -/* Base address of CPLD controller on the Debug board */
> -#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
> -
> -/* LAN9217 ethernet base address */
> -#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
> -
> -/* CPLD config and interrupt base address */
> -#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
> -
> -/* status, interrupt */
> -#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
> -#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
> -#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
> -/* magic word for debug CPLD */
> -#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
> -#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
> -/* CPLD code version */
> -#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
> -/* magic word for debug CPLD */
> -#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
> -
>  /* CPLD IRQ line for external uart, external ethernet etc */
>  #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
>
> -#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
> -#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
> -
> -#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
> -
> -#define MXC_MAX_EXP_IO_LINES	16
> -
>  /*
>   * This file contains the board-specific initialization routines.
>   */
>