From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 26 Oct 2010 12:03:30 +0200 Subject: [U-Boot] [PATCH 1/2] mx51evk: support new relocation scheme In-Reply-To: <20101026094222.C5BAD152451@gemini.denx.de> References: <1288019681-18496-1-git-send-email-shawn.gsc@gmail.com> <1288019681-18496-2-git-send-email-shawn.gsc@gmail.com> <4CC68A6B.1030302@denx.de> <4CC68DD6.6030506@denx.de> <4CC69072.9010403@denx.de> <4CC692A9.2080800@denx.de> <4CC693FE.4090500@denx.de> <20101026094222.C5BAD152451@gemini.denx.de> Message-ID: <4CC6A772.1080509@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Wolfgang, Wolfgang Denk schrieb: > Dear Heiko Schocher, > > In message <4CC693FE.4090500@denx.de> you wrote: >>>> Don;t know if IRAM_BASE_SIZE exists ... >>> we must define it. I set it in the board configuration file, but it is >>> wrong. The value should be moved into register definition file for the >>> SoC (imx-regs.h) >> Full-Ack. This is a SoC define, not board dependend. > > It may be board dependent - for exmaple, when there is some large and > conveniently usable SRAM on a board, you might want to use that > instead of any limited area on the SoC. IRAM_BASE_SIZE is SoC dependend! You maybe mean CONFIG_SYS_INIT_SP_ADDR which can be of course board dependend. bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany