Re: [lm-sensors] looking for help with W83795ADG

[Karsten de Freese <karsten@maxi-dsl.de>]

[-- Attachment #1.1: Type: text/plain, Size: 1300 bytes --]

hi Jean,


Am 26.10.2010 21:06, schrieb Jean Delvare:
> I think you forgot to check the FAQ and in particular:
> http://www.lm-sensors.org/wiki/FAQ/Chapter3#Isetnewlimitsanditdidntwork
>
>    
indeed - I remember having read that before, but just forgot ..

now setting the limits does work for jc42 _min and _max values, however 
not for _max_hyst (although the setting seems to exist)

The latest config file:

/bus "i2c-0" "SMBus PIIX4 adapter at 0b00"

chip "jc42-i2c-0-18"
         label temp1 "DRAM_0"
         set temp1_max 60
         set temp1_crit 70
         set temp1_max_hyst 65

chip "jc42-i2c-0-19"
         label temp1 "DRAM_1"
         set temp1_max 60
         set temp1_crit 70
         set temp1_max_hyst 65
/
and the latest output
/karsten:~/temp$ sudo sensors -s
Error: File /etc/sensors.d/jc42.conf, line 7: Failed to set value
jc42-i2c-0-18: At least one "set" statement failed
Error: File /etc/sensors.d/jc42.conf, line 14: Failed to set value
jc42-i2c-0-19: At least one "set" statement failed/

(actually I get the same error message for the K10temp _min & _max 
settings, but maybe these are hardwired?)
> Honestly, you are a very pleasant user to deal with.
>    
Thanks.. I try my best not to look too stupid, as I'm really a Linux 
beginner..

best regards -

Karsten


[-- Attachment #1.2: Type: text/html, Size: 2282 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors