From mboxrd@z Thu Jan 1 00:00:00 1970 From: Karsten de Freese Date: Tue, 26 Oct 2010 22:32:54 +0000 Subject: Re: [lm-sensors] looking for help with W83795ADG Message-Id: <4CC75716.8080805@maxi-dsl.de> List-Id: References: <20101022135607.6996731s0m2gcr48@webmail.mnet-online.de> In-Reply-To: <20101022135607.6996731s0m2gcr48@webmail.mnet-online.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org hi Jean, to close the topic on jc42, using temp1_crit_hyst did the trick! thanks again - Karsten Am 26.10.2010 22:30, schrieb Jean Delvare: > > There's a trick: temp1_max_hyst exists but is read-only. > temp1_crit_hyst is writable, set it and the same delta will be applied > to temp1_max_hyst (relative to temp1_max, obviously.) The reason is > that there's only one register in the chip to store the delta, and it > applied to both limits. > > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors