Re: tap0 device stopped working in 2.6.36 (ok in 2.6.35)

[Jim <jim876@xs4all.nl>]

On 10/27/2010 03:18 AM, Nolan Leake wrote:
> On Sun, 2010-10-24 at 11:59 +0200, Jim wrote:
>> Thanks for explaining the purpose of the patch.
>> But it appears something is missing and I think it breaks current
>> userspace. I use this tap0 device together with VirtualBox, I have a
>> virtual machine setup as bridged to tap0, not a very odd or strange
>> setup (this used to be the only method).
>> On the host side I run dhcpd to hand out IP address to the virtual
>> machine, but despite the dhcpd running on the tap0 device it never got
>> 'ready' in the sense that no IP packets made it out from the host to the
>> guest.
> 
> To make sure I understand the situation, is this correct (ignoring the
> exact names of the interfaces):
> br0 bridges between eth0 and tap0, and you run dhcpd on tap0?
> 
> Since tap0 is part of the bridge, I think dhcpd should be running on
> br0.  Does that work?
> 

Not exactly, VirtualBox calls it "bridged adapter", it 'bridges' the
guest machine to the tap0 interface on the host for so called host-only
networking.
See eg. http://forums.virtualbox.org/viewtopic.php?f=1&t=165

And this sequence is now simply failing
  tunctl -t tap0 -u tuxuser
  ifconfig tap0 10.0.0.1 up

Jim