From: "D. K." <user.vdr@gmail.com>
To: linux-media@vger.kernel.org
Subject: [PATCH] dvb-usb-gp8psk: get firmware and fpga versions
Date: Sat, 30 Oct 2010 11:49:49 -0700 [thread overview]
Message-ID: <4CCC68CD.50409@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 411 bytes --]
This patch adds retrieval of firmware and FPGA versions of Genpix devices.
That information is useful for users who experience performance differences
with the various firmware versions, and may want to use a specific firmware
that best suits their needs.
Example dmesg output:
gp8psk: FW Version = 2.09.4 (0x20904) Build 2009/04/02
gp8psk: FPGA Version = 1
Signed-off-by: Derek Kelly <user.vdr@gmail.com>
[-- Attachment #2: gp8psk-get_fw_fpga_git.diff --]
[-- Type: text/plain, Size: 3253 bytes --]
diff -pruN v4l-dvb.orig/linux/drivers/media/dvb/dvb-usb/gp8psk.c v4l-dvb/linux/drivers/media/dvb/dvb-usb/gp8psk.c
--- v4l-dvb.orig/linux/drivers/media/dvb/dvb-usb/gp8psk.c 2010-10-30 11:20:46.000000000 -0700
+++ v4l-dvb/linux/drivers/media/dvb/dvb-usb/gp8psk.c 2010-10-30 11:21:36.000000000 -0700
@@ -24,6 +24,33 @@ MODULE_PARM_DESC(debug, "set debugging l
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
+{
+ return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6));
+}
+
+static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers)
+{
+ return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1));
+}
+
+static void gp8psk_info(struct dvb_usb_device *d)
+{
+ u8 fpga_vers, fw_vers[6];
+
+ if (!gp8psk_get_fw_version(d, fw_vers))
+ info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i",
+ fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers),
+ 2000 + fw_vers[5], fw_vers[4], fw_vers[3]);
+ else
+ info("failed to get FW version");
+
+ if (!gp8psk_get_fpga_version(d, &fpga_vers))
+ info("FPGA Version = %i", fpga_vers);
+ else
+ info("failed to get FPGA version");
+}
+
int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
{
int ret = 0,try = 0;
@@ -146,6 +173,7 @@ static int gp8psk_power_ctrl(struct dvb_
gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
return -EINVAL;
+ gp8psk_info(d);
}
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
diff -pruN v4l-dvb.orig/linux/drivers/media/dvb/dvb-usb/gp8psk.h v4l-dvb/linux/drivers/media/dvb/dvb-usb/gp8psk.h
--- v4l-dvb.orig/linux/drivers/media/dvb/dvb-usb/gp8psk.h 2010-10-30 11:20:46.000000000 -0700
+++ v4l-dvb/linux/drivers/media/dvb/dvb-usb/gp8psk.h 2010-10-30 11:24:30.000000000 -0700
@@ -25,7 +25,6 @@ extern int dvb_usb_gp8psk_debug;
#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args)
#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args)
-/* gp8psk commands */
/* Twinhan Vendor requests */
#define TH_COMMAND_IN 0xC0
@@ -49,8 +48,10 @@ extern int dvb_usb_gp8psk_debug;
#define SET_DVB_MODE 0x8E
#define SET_DN_SWITCH 0x8F
#define GET_SIGNAL_LOCK 0x90 /* in */
+#define GET_FW_VERS 0x92
#define GET_SERIAL_NUMBER 0x93 /* in */
#define USE_EXTRA_VOLT 0x94
+#define GET_FPGA_VERS 0x95
#define CW3K_INIT 0x9d
/* PSK_configuration bits */
@@ -88,6 +89,11 @@ extern int dvb_usb_gp8psk_debug;
#define PRODUCT_STRING_READ 0x0D
#define FW_BCD_VERSION_READ 0x14
+/* firmware revision id's */
+#define GP8PSK_FW_REV1 0x020604
+#define GP8PSK_FW_REV2 0x020704
+#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0])
+
extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
reply other threads:[~2010-10-30 18:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CCC68CD.50409@gmail.com \
--to=user.vdr@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.