Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35.7-ftrace-test (andersb@domain.hid) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #3 SMP Tue Nov 2 18:50:23 CET 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000ce7b4000 (usable) BIOS-e820: 00000000ce7b4000 - 00000000ce877000 (ACPI NVS) BIOS-e820: 00000000ce877000 - 00000000cfa9e000 (usable) BIOS-e820: 00000000cfa9e000 - 00000000cfaa0000 (reserved) BIOS-e820: 00000000cfaa0000 - 00000000cfb8e000 (usable) BIOS-e820: 00000000cfb8e000 - 00000000cfbe5000 (ACPI NVS) BIOS-e820: 00000000cfbe5000 - 00000000cfbe8000 (usable) BIOS-e820: 00000000cfbe8000 - 00000000cfbf3000 (ACPI data) BIOS-e820: 00000000cfbf3000 - 00000000cfbf4000 (usable) BIOS-e820: 00000000cfbf4000 - 00000000cfbff000 (ACPI data) BIOS-e820: 00000000cfbff000 - 00000000cfc00000 (usable) BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000012c000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x12c000 max_arch_pfn = 0x1000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0CFF00000 mask FFFF00000 uncachable 1 base 0D0000000 mask FF0000000 uncachable 2 base 0E0000000 mask FE0000000 uncachable 3 base 0CFBAC000 mask FFFFFF000 write-back 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 found SMP MP-table at [c00fe200] fe200 init_memory_mapping: 0000000000000000-00000000375fe000 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 7000-f000 RAMDISK: 37294000 - 37ff0000 Allocated new RAMDISK: 0133e000 - 02099bb5 Move RAMDISK from 0000000037294000 - 0000000037fefbb4 to 0133e000 - 02099bb4 ACPI: RSDP 000fe020 00014 (v00 INTEL ) ACPI: RSDT cfbfd038 00064 (v01 INTEL DP35DP 000001B5 01000013) ACPI: FACP cfbfc000 00074 (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: DSDT cfbf8000 03DB9 (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: FACS cfb99000 00040 ACPI: APIC cfbf7000 00078 (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: WDDT cfbf6000 00040 (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: MCFG cfbf5000 0003C (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: ASF! cfbf4000 000A6 (v32 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: ASPT cfbf2000 0002C (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: WDTT cfbf1000 002CC (v01 INTEL DP35DP 000001B5 MSFT 01000013) ACPI: SSDT cfbf0000 00204 (v01 INTEL CpuPm 000001B5 MSFT 01000013) ACPI: SSDT cfbef000 001F9 (v01 INTEL Cpu0Ist 000001B5 MSFT 01000013) ACPI: SSDT cfbee000 001F9 (v01 INTEL Cpu1Ist 000001B5 MSFT 01000013) ACPI: SSDT cfbed000 001F9 (v01 INTEL Cpu2Ist 000001B5 MSFT 01000013) ACPI: SSDT cfbec000 001F9 (v01 INTEL Cpu3Ist 000001B5 MSFT 01000013) ACPI: SSDT cfbeb000 001CF (v01 INTEL Cpu0Cst 000001B5 MSFT 01000013) ACPI: SSDT cfbea000 001CF (v01 INTEL Cpu1Cst 000001B5 MSFT 01000013) ACPI: SSDT cfbe9000 001CF (v01 INTEL Cpu2Cst 000001B5 MSFT 01000013) ACPI: SSDT cfbe8000 001CF (v01 INTEL Cpu3Cst 000001B5 MSFT 01000013) ACPI: Local APIC address 0xfee00000 3914MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 node 0 bootmap 0000b000 - 00011ec0 (12/32 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #1 [0000400000 - 000133090c] TEXT DATA BSS ==> [0000400000 - 000133090c] #2 [0001331000 - 000133d136] BRK ==> [0001331000 - 000133d136] #3 [000009fc00 - 00000fe200] BIOS reserved ==> [000009fc00 - 00000fe200] #4 [00000fe200 - 00000fe210] MP-table mpf ==> [00000fe200 - 00000fe210] #5 [00000fe250 - 0000100000] BIOS reserved ==> [00000fe250 - 0000100000] #6 [00000fe210 - 00000fe250] MP-table mpc ==> [00000fe210 - 00000fe250] #7 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] #8 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #9 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] #10 [000133e000 - 000209a000] NEW RAMDISK ==> [000133e000 - 000209a000] #11 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000] Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x0012c000 Movable zone start PFN for each node early_node_map[8] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x000ce7b4 0: 0x000ce877 -> 0x000cfa9e 0: 0x000cfaa0 -> 0x000cfb8e 0: 0x000cfbe5 -> 0x000cfbe8 0: 0x000cfbf3 -> 0x000cfbf4 0: 0x000cfbff -> 0x000cfc00 0: 0x00100000 -> 0x0012c000 On node 0 totalpages: 1030764 free_area_init_node: node 0, pgdat c0a2af00, node_mem_map c209b020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 7829 pages used for memmap HighMem zone: 796219 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at d0000000 (gap: d0000000:20000000) setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 340 pages/cpu @c4800000 s1368256 r0 d24384 u2097152 pcpu-alloc: s1368256 r0 d24384 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021163 Kernel command line: ro root=UUID=c3fb4b4b-4e9c-477c-8e9a-0a95d05f8e08 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=sv-latin1 8250.nr_uarts=20 console=ttyS4,115200 loglevel=8 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 24575980 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000375fe:0012c000) Memory: 4024872k/4915200k available (3901k kernel code, 98184k reserved, 2537k data, 1840k init, 3216192k highmem) virtual kernel memory layout: fixmap : 0xffa96000 - 0xfffff000 (5540 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc0a4a000 - 0xc0c16000 (1840 kB) .data : 0xc07cf595 - 0xc0a49af0 (2537 kB) .text : 0xc0400000 - 0xc07cf595 (3901 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. RCU lockdep checking is enabled. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:1280 I-pipe 2.7-04: pipeline enabled. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3823 kB per task-struct memory footprint: 1920 bytes ODEBUG: 29 of 29 active objects replaced Fast TSC calibration using PIT Detected 2400.152 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.30 BogoMIPS (lpj=2400152) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100428 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20580 entries in 41 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 2) ... ....... works. CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b lockdep: fixing up alternatives. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/sched.c:616 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by swapper/1: #0: (cpu_add_remove_lock){+.+.+.}, at: [] cpu_maps_update_begin+0x14/0x16 #1: (cpu_hotplug.lock){+.+.+.}, at: [] cpu_hotplug_begin+0x22/0x45 #2: (std_spinlock_raw(&rq->lock)){-.....}, at: [] init_idle+0x25/0xaa stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.35.7-ftrace-test #3 Call Trace: [] lockdep_rcu_dereference+0x7d/0x86 [] task_group+0x72/0x7e [] set_task_rq+0x13/0x5c [] init_idle+0x65/0xaa [] fork_idle+0x9d/0xa6 [] do_fork_idle+0x13/0x21 [] do_boot_cpu+0x108/0x8ca [] ? kzalloc_node.clone.0+0xd/0xf [] ? do_fork_idle+0x0/0x21 [] native_cpu_up+0x125/0x259 [] ? __cpu_notify+0x1a/0x2e [] _cpu_up+0x85/0xed [] cpu_up+0x4c/0x5c [] kernel_init+0xc1/0x1ca [] ? kernel_init+0x0/0x1ca [] kernel_thread_helper+0x6/0x10 Booting Node 0, Processors #1 Initializing CPU#1 lockdep: fixing up alternatives. #2 Initializing CPU#2 lockdep: fixing up alternatives. #3 Ok. Initializing CPU#3 Brought up 4 CPUs Total of 4 processors activated (19198.29 BogoMIPS). devtmpfs: initialized atomic64 test passed for i586+ platform with CX8 and with SSE Time: 18:01:06 Date: 11/02/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xefffffff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: reg 10: [mem 0xe2325900-0xe232590f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: reg 10: [mem 0xe2300000-0xe231ffff] pci 0000:00:19.0: reg 14: [mem 0xe2324000-0xe2324fff] pci 0000:00:19.0: reg 18: [io 0x40e0-0x40ff] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x40c0-0x40df] pci 0000:00:1a.1: reg 20: [io 0x40a0-0x40bf] pci 0000:00:1a.2: reg 20: [io 0x4080-0x409f] pci 0000:00:1a.7: reg 10: [mem 0xe2325400-0xe23257ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xe2320000-0xe2323fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f] pci 0000:00:1d.1: reg 20: [io 0x4040-0x405f] pci 0000:00:1d.2: reg 20: [io 0x4020-0x403f] pci 0000:00:1d.7: reg 10: [mem 0xe2325000-0xe23253ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) pci 0000:00:1f.2: reg 10: [io 0x4458-0x445f] pci 0000:00:1f.2: reg 14: [io 0x446c-0x446f] pci 0000:00:1f.2: reg 18: [io 0x4450-0x4457] pci 0000:00:1f.2: reg 1c: [io 0x4468-0x446b] pci 0000:00:1f.2: reg 20: [io 0x4430-0x443f] pci 0000:00:1f.2: reg 24: [io 0x4420-0x442f] pci 0000:00:1f.3: reg 10: [mem 0xe2325800-0xe23258ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:00:1f.5: reg 10: [io 0x4448-0x444f] pci 0000:00:1f.5: reg 14: [io 0x4464-0x4467] pci 0000:00:1f.5: reg 18: [io 0x4440-0x4447] pci 0000:00:1f.5: reg 1c: [io 0x4460-0x4463] pci 0000:00:1f.5: reg 20: [io 0x4410-0x441f] pci 0000:00:1f.5: reg 24: [io 0x4400-0x440f] pci 0000:01:00.0: reg 10: [mem 0xe1000000-0xe1ffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe0ffffff 64bit] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [io 0x3018-0x301f] pci 0000:03:00.0: reg 14: [io 0x3024-0x3027] pci 0000:03:00.0: reg 18: [io 0x3010-0x3017] pci 0000:03:00.0: reg 1c: [io 0x3020-0x3023] pci 0000:03:00.0: reg 20: [io 0x3000-0x300f] pci 0000:03:00.0: reg 24: [mem 0xe2200000-0xe22001ff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xe2200000-0xe22fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.2: PCI bridge to [bus 04-04] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.3: PCI bridge to [bus 05-05] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:06:00.0: reg 10: [io 0x2010-0x2017] pci 0000:06:00.0: reg 14: [mem 0xe2105000-0xe2105fff] pci 0000:06:00.0: reg 20: [mem 0xe2104000-0xe2104fff] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.1: reg 10: [io 0x2008-0x200f] pci 0000:06:00.1: reg 14: [mem 0xe2103000-0xe2103fff] pci 0000:06:00.1: reg 20: [mem 0xe2102000-0xe2102fff] pci 0000:06:00.1: supports D1 D2 pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:00.1: PME# disabled pci 0000:06:00.2: reg 10: [io 0x2000-0x2007] pci 0000:06:00.2: reg 14: [io 0x2018-0x201b] pci 0000:06:00.2: reg 18: [mem 0xe2101000-0xe2101fff] pci 0000:06:00.2: reg 20: [mem 0xe2100000-0xe2100fff] pci 0000:06:00.2: supports D1 D2 pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:00.2: PME# disabled pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: PCI bridge to [bus 06-06] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe21fffff] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:07:00.0: reg 10: [mem 0xe2044000-0xe2044fff] pci 0000:07:00.0: supports D1 D2 pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.0: PME# disabled pci 0000:07:01.0: reg 10: [mem 0xe2020000-0xe203ffff] pci 0000:07:01.0: reg 14: [mem 0xe2000000-0xe201ffff] pci 0000:07:01.0: reg 18: [io 0x1000-0x103f] pci 0000:07:01.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold pci 0000:07:01.0: PME# disabled pci 0000:07:02.0: reg 10: [io 0x0000-0x0007] pci 0000:07:02.0: reg 14: [io 0x0000-0x0007] pci 0000:07:02.0: reg 18: [io 0x0000-0x0007] pci 0000:07:02.0: reg 1c: [io 0x0000-0x0007] pci 0000:07:02.1: reg 10: [io 0x0000-0x0007] pci 0000:07:02.1: reg 14: [io 0x0000-0x0007] pci 0000:07:02.1: reg 18: [io 0x0000-0x0007] pci 0000:07:02.1: reg 1c: [io 0x0000-0x0007] pci 0000:07:03.0: reg 10: [mem 0xe2045000-0xe20457ff] pci 0000:07:03.0: reg 14: [mem 0xe2040000-0xe2043fff] pci 0000:07:03.0: supports D1 D2 pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1e.0: bridge window [mem 0xe2000000-0xe20fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) HEST: Table is not found! vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000ce7b4000 - 00000000cfffffff reserve RAM buffer: 00000000cfa9e000 - 00000000cfffffff reserve RAM buffer: 00000000cfb8e000 - 00000000cfffffff reserve RAM buffer: 00000000cfbe8000 - 00000000cfffffff reserve RAM buffer: 00000000cfbf4000 - 00000000cfffffff reserve RAM buffer: 00000000cfc00000 - 00000000cfffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved system 00:06: [io 0x0500-0x053f] has been reserved system 00:06: [io 0x0400-0x047f] has been reserved system 00:06: [io 0x0680-0x06ff] has been reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:07:01.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8600000-0xf87fffff] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf8a00000-0xf8bfffff] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8c00000-0xf8dfffff 64bit pref] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff 64bit pref] pci 0000:00:1e.0: BAR 15: assigned [mem 0xf9000000-0xf90fffff pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xe2200000-0xe22fffff] pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-04] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf87fffff] pci 0000:00:1c.2: bridge window [mem 0xf8800000-0xf89fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-05] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.3: bridge window [mem 0xf8a00000-0xf8bfffff] pci 0000:00:1c.3: bridge window [mem 0xf8c00000-0xf8dfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 06-06] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe21fffff] pci 0000:00:1c.4: bridge window [mem 0xf8e00000-0xf8ffffff 64bit pref] pci 0000:07:01.0: BAR 6: assigned [mem 0xf9000000-0xf901ffff pref] pci 0000:07:02.0: BAR 0: assigned [io 0x1040-0x1047] pci 0000:07:02.0: BAR 0: set to [io 0x1040-0x1047] (PCI address [0x1040-0x1047] pci 0000:07:02.0: BAR 1: assigned [io 0x1048-0x104f] pci 0000:07:02.0: BAR 1: set to [io 0x1048-0x104f] (PCI address [0x1048-0x104f] pci 0000:07:02.0: BAR 2: assigned [io 0x1050-0x1057] pci 0000:07:02.0: BAR 2: set to [io 0x1050-0x1057] (PCI address [0x1050-0x1057] pci 0000:07:02.0: BAR 3: assigned [io 0x1058-0x105f] pci 0000:07:02.0: BAR 3: set to [io 0x1058-0x105f] (PCI address [0x1058-0x105f] pci 0000:07:02.1: BAR 0: assigned [io 0x1060-0x1067] pci 0000:07:02.1: BAR 0: set to [io 0x1060-0x1067] (PCI address [0x1060-0x1067] pci 0000:07:02.1: BAR 1: assigned [io 0x1068-0x106f] pci 0000:07:02.1: BAR 1: set to [io 0x1068-0x106f] (PCI address [0x1068-0x106f] pci 0000:07:02.1: BAR 2: assigned [io 0x1070-0x1077] pci 0000:07:02.1: BAR 2: set to [io 0x1070-0x1077] (PCI address [0x1070-0x1077] pci 0000:07:02.1: BAR 3: assigned [io 0x1078-0x107f] pci 0000:07:02.1: BAR 3: set to [io 0x1078-0x107f] (PCI address [0x1078-0x107f] pci 0000:00:1e.0: PCI bridge to [bus 07-07] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1e.0: bridge window [mem 0xe2000000-0xe20fffff] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf90fffff pref] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0000 -> 0003) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0000 -> 0003) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0000 -> 0003) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xefffffff] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf81fffff] pci_bus 0000:02: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe22fffff] pci_bus 0000:03: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] pci_bus 0000:04: resource 1 [mem 0xf8600000-0xf87fffff] pci_bus 0000:04: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff] pci_bus 0000:05: resource 1 [mem 0xf8a00000-0xf8bfffff] pci_bus 0000:05: resource 2 [mem 0xf8c00000-0xf8dfffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] pci_bus 0000:06: resource 1 [mem 0xe2100000-0xe21fffff] pci_bus 0000:06: resource 2 [mem 0xf8e00000-0xf8ffffff 64bit pref] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] pci_bus 0000:07: resource 1 [mem 0xe2000000-0xe20fffff] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf90fffff pref] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:07: resource 7 [mem 0x000e0000-0x000effff] pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfeafffff] pci_bus 0000:07: resource 9 [mem 0xd0000000-0xefffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 3, 49152 bytes) UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 13680k freed audit: initializing netlink socket (disabled) type=2000 audit(1288720870.547:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1606 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 6572 bytes left cryptomgr_test used greatest stack depth: 6212 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ERST: Table is not found! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 20 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 0000:06:00.0: ttyS4 at I/O 0x2010 (irq = 16) is a ST16650V2 console [ttyS4] enabled serial 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:06:00.1: ttyS5 at I/O 0x2008 (irq = 17) is a ST16650V2 serial 0000:07:02.0: enabling device (0000 -> 0001) serial 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 0000:07:02.0: ttyS6 at I/O 0x1040 (irq = 18) is a 16550A 0000:07:02.0: ttyS7 at I/O 0x1048 (irq = 18) is a 16550A 0000:07:02.0: ttyS8 at I/O 0x1050 (irq = 18) is a 16550A 0000:07:02.0: ttyS9 at I/O 0x1058 (irq = 18) is a 16550A serial 0000:07:02.1: enabling device (0000 -> 0001) serial 0000:07:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 0000:07:02.1: ttyS10 at I/O 0x1060 (irq = 18) is a 16550A 0000:07:02.1: ttyS11 at I/O 0x1068 (irq = 18) is a 16550A 0000:07:02.1: ttyS12 at I/O 0x1070 (irq = 18) is a 16550A 0000:07:02.1: ttyS13 at I/O 0x1078 (irq = 18) is a 16550A brd: module loaded loop: module loaded ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x4458 ctl 0x446c bmdma 0x4430 irq 21 ata2: SATA max UDMA/133 cmd 0x4450 ctl 0x4468 bmdma 0x4438 irq 21 ata_piix 0000:00:1f.5: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x4448 ctl 0x4464 bmdma 0x4410 irq 21 ata4: SATA max UDMA/133 cmd 0x4440 ctl 0x4460 bmdma 0x4418 irq 21 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe2325400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35.7-ftrace-test ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe2325000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35.7-ftrace-test ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040c0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35.7-ftrace-test uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040a0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ata4: SATA link down (SStatus 0 SControl 300) usb usb4: Product: UHCI Host Controller ata3: SATA link down (SStatus 0 SControl 300) usb usb4: Manufacturer: Linux 2.6.35.7-ftrace-test uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 17, io base 0x00004080 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35.7-ftrace-test uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004060 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.35.7-ftrace-test uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004040 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.35.7-ftrace-test uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.35.7-ftrace-test uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usb 4-1: new low speed USB device using uhci_hcd and address 2 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@domain.hidhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 IMA: No TPM chip found, activating TPM-bypass! Magic number: 2:52:38 bdi 7:3: hash matches rtc_cmos 00:03: setting system clock to 2010-11-02 18:01:16 UTC (1288720876) ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 0 SControl 300) ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) ata2.01: link offline, clearing class 3 to NONE ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 Initalizing network drop monitor service ata.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) 1ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda2 < sda5 sda6 sda7sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 1840k freed usb 4-1: New USB device found, idVendor=045e, idProduct=0084 Write protecting the kernel text: 3904k usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: Basic Optical Mouse usb 4-1: Manufacturer: Microsoft Write protecting the kernel read-only data: 1884k input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2 generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.1-1/input0 usb 4-2: new full speed USB device using uhci_hcd and address 3 dracut: dracut-005-5.fc13 usb 4-2: New USB device found, idVendor=04b3, idProduct=301a usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB 1.1 2port downstream low power hub usb 4-2: Manufacturer: Lite-On Technology hub 4-2:1.0: USB hub found hub 4-2:1.0: 3 ports detected udev: starting version 153 usb 4-2.1: new full speed USB device using uhci_hcd and address 4 usb 4-2.1: New USB device found, idVendor=04b3, idProduct=301b usb 4-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 4-2.1: Product: USB Productivity Option Keyboard( has the hub in # 1 ) usb 4-2.1: Manufacturer: Lite-On Technology input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.1/4-2.1:1.0/input/input3 generic-usb 0003:04B3:301B.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1a.1-2.1/input0 input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.1/4-2.1:1.1/input/input4 async/0 used greatest stack depth: 6208 bytes left generic-usb 0003:04B3:301B.0003: input,hidraw2: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1a.1-2.1/input1 async/1 used greatest stack depth: 6132 bytes left [drm] Initialized drm 1.1.0 20060810 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x246100b1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 05.72.22.75 [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [drm] nouveau 0000:01:00.0: BIT table 'd' not found [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0080c020 [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2 [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD272 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD576 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDA93 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDC0E [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDD83 [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM [TTM] Zone kernel: Available graphics memory: 412100 kiB. [TTM] Zone highmem: Available graphics memory: 2020196 kiB. [TTM] Initializing pool allocator. [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo c1f9cd20 fbcon: nouveaufb (fb0) is primary device [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A Console: switching to colour frame buffer device 160x64 fb0: nouveaufb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 modprobe used greatest stack depth: 5712 bytes left dracut: Starting plymouth daemon pata_marvell 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pata_marvell 0000:03:00.0: setting latency timer to 64 scsi4 : pata_marvell scsi5 : pata_marvell ata5: PATA max UDMA/100 cmd 0x3018 ctl 0x3024 bmdma 0x3000 irq 17 ata6: DUMMY firewire_ohci 0000:07:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 firewire_core: created device fw0: GUID 30bd050200002031, S400 EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) firewire_core: created device fw1: GUID 00902700003372d2, S400 dracut: Mounted root filesystem /dev/sda5 dracut: Loading SELinux policy SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1288720883.476:2): selinux=0 auid=4294967295 ses=4294967295 load_policy used greatest stack depth: 5572 bytes left dracut: /sbin/load_policy: Can't load policy file /etc/selinux/targeted/policy/policy.15: No such file or directory dracut: Switching root Welcome to Fedora Press 'I' to enter interactive startup. readahead: starting Starting udev: udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:1 udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:2 udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:3 udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:4 udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:5 udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:6 udevd[379]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:7 udevd[379]: specified group 'xenomai' unknown [ OK ] Setting hostname calvin: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/sda5 /dev/sda5: clean, 820378/3055616 files, 7343425/12209384 blocks [/sbin/fsck.ext3 (1) -- /local] fsck.ext3 -a /dev/sda7 /local: clean, 698582/53002240 files, 9902300/105978789 blocks (check in 2 mounts) [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Running DKMS auto installation service for kernel 2.6.35.7-ftrace-test .Stopping regler_firewall (client): [ OK ] Starting regler_firewall (client): [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting mdmonitor: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Retrigger failed udev events[ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting network_standalone: Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting cups: [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] modem-manager: ModemManager (version 0.4-4.git20100720.fc13) starting... modem-manager: Loaded plugin Longcheer modem-manager: Loaded plugin Ericsson MBM modem-manager: Loaded plugin SimTech modem-manager: Loaded plugin Option modem-manager: Loaded plugin AnyData modem-manager: Loaded plugin Sierra modem-manager: Loaded plugin Huawei modem-manager: Loaded plugin Gobi modem-manager: Loaded plugin Novatel modem-manager: Loaded plugin MotoC modem-manager: Loaded plugin Nokia modem-manager: Loaded plugin ZTE modem-manager: Loaded plugin Option High-Speed nm-dispatcher.action: nm_dispatcher_action: Invalid connection: '(null)' / 'connection setting not found' invalid: 1 ipsec_setup: Starting Openswan IPsec U2.6.29/K2.6.35.7-ftrace-test... modem-manager: (tty/ttyS1): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS14): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS15): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS16): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS17): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS18): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS19): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS2): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS3): port's parent platform driver is not whitelisted modem-manager: (tty/ttyS0): could not get port's parent device nm-dispatcher.action: nm_dispatcher_action: Invalid connection: '(null)' / 'connection setting not found' invalid: 1 pluto[1439]: nss directory plutomain: /etc/ipsec.d pluto[1439]: NSS Initialized pluto[1439]: Non-fips mode set in /proc/sys/crypto/fips_enabled pluto[1439]: Starting Pluto (Openswan Version 2.6.29; Vendor ID OE^Zer]edrwc) pid:1439 pluto[1439]: Non-fips mode set in /proc/sys/crypto/fips_enabled pluto[1439]: LEAK_DETECTIVE support [disabled] pluto[1439]: SAref support [disabled]: Protocol not available pluto[1439]: SAbind support [disabled]: Protocol not available pluto[1439]: NSS support [enabled] pluto[1439]: HAVE_STATSD notification support not compiled in pluto[1439]: Setting NAT-Traversal port-4500 floating to on pluto[1439]: port floating activation criteria nat_t=1/port_float=1 pluto[1439]: NAT-Traversal support [enabled] pluto[1439]: 1 bad entries in virtual_private - none loaded pluto[1439]: ike_alg_register_enc(): Activating OAKLEY_TWOFISH_CBC_SSH: Ok (ret=0) pluto[1439]: ike_alg_register_enc(): Activating OAKLEY_TWOFISH_CBC: Ok (ret=0) pluto[1439]: ike_alg_register_enc(): Activating OAKLEY_SERPENT_CBC: Ok (ret=0) pluto[1439]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0) pluto[1439]: ike_alg_register_enc(): Activating OAKLEY_BLOWFISH_CBC: Ok (ret=0) pluto[1439]: ike_alg_register_hash(): Activating OAKLEY_SHA2_512: Ok (ret=0) pluto[1439]: ike_alg_register_hash(): Activating OAKLEY_SHA2_256: Ok (ret=0) pluto[1439]: no helpers will be started, all cryptographic operations will be done inline pluto[1439]: Using Linux 2.6 IPsec interface code on 2.6.35.7-ftrace-test (experimental code) Enabling Bluetooth devices: Starting sshd: [ OK ] Starting abrt daemon: [ OK ] Starting crond: [ OK ] pluto[1439]: ike_alg_register_enc(): Activating aes_ccm_8: Ok (ret=0) pluto[1439]: ike_alg_add(): ERROR: Algorithm already exists pluto[1439]: ike_alg_register_enc(): Activating aes_ccm_12: FAILED (ret=-17) pluto[1439]: ike_alg_add(): ERROR: Algorithm already exists pluto[1439]: ike_alg_register_enc(): Activating aes_ccm_16: FAILED (ret=-17) pluto[1439]: ike_alg_add(): ERROR: Algorithm already exists pluto[1439]: ike_alg_register_enc(): Activating aes_gcm_8: FAILED (ret=-17) pluto[1439]: ike_alg_add(): ERROR: Algorithm already exists pluto[1439]: ike_alg_register_enc(): Activating aes_gcm_12: FAILED (ret=-17) pluto[1439]: ike_alg_add(): ERROR: Algorithm already exists pluto[1439]: ike_alg_register_enc(): Activating aes_gcm_16: FAILED (ret=-17) pluto[1439]: Could not change to directory '/etc/ipsec.d/cacerts': / pluto[1439]: Could not change to directory '/etc/ipsec.d/aacerts': / pluto[1439]: Could not change to directory '/etc/ipsec.d/ocspcerts': / pluto[1439]: Could not change to directory '/etc/ipsec.d/crls' pluto[1439]: listening for IKE messages pluto[1439]: NAT-Traversal: Trying new style NAT-T pluto[1439]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) pluto[1439]: NAT-Traversal: Trying old style NAT-T pluto[1439]: adding interface eth0/eth0 130.235.83.112:500 pluto[1439]: adding interface eth0/eth0 130.235.83.112:4500 pluto[1439]: adding interface lo/lo 127.0.0.1:500 pluto[1439]: adding interface lo/lo 127.0.0.1:4500 pluto[1439]: adding interface lo/lo ::1:500 pluto[1439]: loading secrets from "/etc/ipsec.secrets" pluto[1439]: no secrets filename matched "/etc/ipsec.d/*.secrets" [ OK ] atd: [ OK ] Registering binary handler for Windows applications: [ OK ] Fedora release 13 (Goddard) Kernel 2.6.35.7-ftrace-test on an i686 (/dev/ttyS4) Kickstart-installed from sperry-02 at Fri Oct 15 11:46:04 CEST 2010 calvin login: ������ Fedora release 13 (Goddard) Kernel 2.6.35.7-ftrace-test on an i686 (/dev/ttyS4) Kickstart-installed from sperry-02 at Fri Oct 15 11:46:04 CEST 2010 calvin login: simcom (? for help) > SysRq : Changing Loglevel Loglevel set to 8 nm-dispatcher.action: nm_dispatcher_action: Invalid connection: '(null)' / 'connection setting not found' invalid: 1 Xenomai: starting native API services. HDA Intel 0000:00:1b.0: PCI INT A disabled e1000 0000:07:01.0: PCI INT A disabled rt_e1000 0000:07:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000: 0000:07:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:7c:9f:0c RTnet: registered rteth0 e1000: rteth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: rteth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching mount.nfs used greatest stack depth: 4476 bytes left [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) mio used greatest stack depth: 4168 bytes left mount.nfs used greatest stack depth: 4140 bytes left [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)