[PATCH] serial/8250: Increase number of serial ports to 32

[Yegor Yefremov <yegor_sub1@visionsystems.de>]

This will make sure that multiple serial port cards can be
used out of the box. Otherwise the user must pass
nr_uarts parameter, that will be often forgotten and increases
support requests for serial card vendors.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>

Index: b/drivers/serial/Kconfig
===================================================================
--- a/drivers/serial/Kconfig	2010-11-10 03:53:21.000000000 +0100
+++ b/drivers/serial/Kconfig	2010-11-10 14:32:54.000000000 +0100
@@ -119,7 +119,7 @@
 config SERIAL_8250_NR_UARTS
 	int "Maximum number of 8250/16550 serial ports"
 	depends on SERIAL_8250
-	default "4"
+	default "32"
 	help
 	  Set this to the number of serial ports you want the driver
 	  to support.  This includes any ports discovered via ACPI or
@@ -130,7 +130,7 @@
 	int "Number of 8250/16550 serial ports to register at runtime"
 	depends on SERIAL_8250
 	range 0 SERIAL_8250_NR_UARTS
-	default "4"
+	default "32"
 	help
 	  Set this to the maximum number of serial ports you want
 	  the kernel to register at boot time.  This can be overridden