All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@cam.ac.uk>
To: "Hennerich, Michael" <Michael.Hennerich@analog.com>
Cc: "linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
	Drivers <Drivers@analog.com>,
	"device-drivers-devel@blackfin.uclinux.org"
	<device-drivers-devel@blackfin.uclinux.org>
Subject: Re: [PATCH] staging: iio: dac: Add support for AD5541A, AD5512A digital to analog convertors
Date: Fri, 19 Nov 2010 17:51:48 +0000	[thread overview]
Message-ID: <4CE6B934.4090805@cam.ac.uk> (raw)
In-Reply-To: <544AC56F16B56944AEC3BD4E3D591771312EE15491@LIMKCMBX1.ad.analog.com>

On 11/19/10 14:51, Hennerich, Michael wrote:
> Jonathan Cameron wrote on 2010-11-19:
>> On 11/19/10 13:56, michael.hennerich@analog.com wrote:
>>> From: Michael Hennerich <michael.hennerich@analog.com>
>>>
>>> Looks fine to me.
> 
> This one is for a new driver, that you haven't reviewed yet.
lol. That kind of shows up that I never tested if it applies. Must be
getting lazy ;)
> 
>>> Signed-off-by: Michael Hennerich
>>> <michael.hennerich@analog.com> Acked-by: Jonathan Cameron
>>> <jic23@cam.ac.uk> ---
>>>  drivers/staging/iio/dac/Kconfig  |    6 +++---
>>>  drivers/staging/iio/dac/ad5446.c |   27 +++++++++++++++++++++++++--
>>>  drivers/staging/iio/dac/ad5446.h |    2 ++
>>>  3 files changed, 30 insertions(+), 5 deletions(-)
>>> diff --git a/drivers/staging/iio/dac/Kconfig
>>> b/drivers/staging/iio/dac/Kconfig index 88914e9..9c497cc 100644
>>> --- a/drivers/staging/iio/dac/Kconfig
>>> +++ b/drivers/staging/iio/dac/Kconfig
>>> @@ -11,11 +11,11 @@ config AD5624R_SPI
>>>        AD5664R convertors (DAC). This driver uses the common SPI
>> interface.
>>>
>>>  config AD5446
>>> -    tristate "Analog Devices AD5444, AD5446 DAC SPI driver"
>>> +    tristate "Analog Devices AD5444, AD5446 and AD5541A, AD5512A DAC
>> SPI driver"
>>>      depends on SPI
>>>      help
>>> -      Say yes here to build support for Analog Devices AD5444 and AD5446
>>> -      multiplying DACs. +     Say yes here to build support for Analog
>>> Devices AD5444, AD5446 +       and AD5541A, AD5512A DACs.
>>>
>>>        To compile this driver as a module, choose M here: the
>>>        module will be called ad5446.
>>> diff --git a/drivers/staging/iio/dac/ad5446.c
>>> b/drivers/staging/iio/dac/ad5446.c
>>> index c70243a..154a7c2 100644
>>> --- a/drivers/staging/iio/dac/ad5446.c
>>> +++ b/drivers/staging/iio/dac/ad5446.c
>>> @@ -43,8 +43,17 @@ static ssize_t ad5446_write(struct device *dev,
>>>      }
>>>
>>>      mutex_lock(&dev_info->mlock);
>>> -    st->data = cpu_to_be16(AD5446_LOAD |
>>> -                           (val << st->chip_info->res_shift));
>>> +    switch (spi_get_device_id(st->spi)->driver_data) {
>>> +    case ID_AD5444:
>>> +    case ID_AD5446:
>>> +                    st->data = cpu_to_be16(AD5446_LOAD |
>>> +                                    (val << st->chip_info->res_shift));
>>> +                    break;
>>> +    case ID_AD5542A:
>>> +    case ID_AD5512A:
>>> +                    st->data = cpu_to_be16(val << st->chip_info-
>>> res_shift);
>>> +                    break;
>>> +    }
>>>
>>>      ret = spi_sync(st->spi, &st->msg);
>>>      mutex_unlock(&dev_info->mlock);
>>> @@ -103,6 +112,18 @@ static const struct ad5446_chip_info
>> ad5446_chip_info_tbl[] = {
>>>              .res_shift = 0,
>>>              .sign = 'u', /* IIO_SCAN_EL_TYPE_UNSIGNED */
>>>      },
>>> +    [ID_AD5542A] = {
>>> +            .bits = 16,
>>> +            .storagebits = 16,
>>> +            .res_shift = 0,
>>> +            .sign = 'u', /* IIO_SCAN_EL_TYPE_UNSIGNED */
>>> +    },
>>> +    [ID_AD5512A] = {
>>> +            .bits = 12,
>>> +            .storagebits = 16,
>>> +            .res_shift = 4,
>>> +            .sign = 'u', /* IIO_SCAN_EL_TYPE_UNSIGNED */
>>> +    },
>>>  };
>>>
>>>  static int __devinit ad5446_probe(struct spi_device *spi) @@ -196,6
>>> +217,8 @@ static int ad5446_remove(struct spi_device *spi)  static
>>> const struct spi_device_id ad5446_id[] = {
>>>      {"ad5444", ID_AD5444},
>>>      {"ad5446", ID_AD5446},
>>> +    {"ad5542a", ID_AD5542A},
>>> +    {"ad5512a", ID_AD5512A},
>>>      {}
>>>  };
>>> diff --git a/drivers/staging/iio/dac/ad5446.h
>>> b/drivers/staging/iio/dac/ad5446.h
>>> index 3456382..0a655f1 100644
>>> --- a/drivers/staging/iio/dac/ad5446.h
>>> +++ b/drivers/staging/iio/dac/ad5446.h
>>> @@ -39,6 +39,8 @@ struct ad5446_state {  enum
>>> ad5446_supported_device_ids {
>>>      ID_AD5444,
>>>      ID_AD5446,
>>> +    ID_AD5542A,
>>> +    ID_AD5512A,
>>>  };
>>>
>>>  #endif /* IIO_ADC_AD5446_H_ */
> 
> Greetings,
> Michael
> 
> --
> Analog Devices GmbH      Wilhelm-Wagenfeld-Str. 6      80807 Muenchen
> Sitz der Gesellschaft Muenchen, Registergericht Muenchen HRB 4036 Geschaeftsfuehrer Thomas Wessel, William A. Martin, Margaret Seif
> 
> 
> 


      reply	other threads:[~2010-11-19 17:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-19 13:56 [PATCH] staging: iio: dac: Add support for AD5541A, AD5512A digital to analog convertors michael.hennerich
2010-11-19 14:45 ` Jonathan Cameron
2010-11-19 14:51   ` Hennerich, Michael
2010-11-19 17:51     ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4CE6B934.4090805@cam.ac.uk \
    --to=jic23@cam.ac.uk \
    --cc=Drivers@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=device-drivers-devel@blackfin.uclinux.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.