From: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>, KVM <kvm@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 6/6] KVM: MMU: delay flush all tlbs on sync_page path
Date: Mon, 22 Nov 2010 11:45:18 +0800 [thread overview]
Message-ID: <4CE9E74E.7070908@cn.fujitsu.com> (raw)
In-Reply-To: <20101119161118.GB20279@amt.cnet>
On 11/20/2010 12:11 AM, Marcelo Tosatti wrote:
>> void kvm_flush_remote_tlbs(struct kvm *kvm)
>> {
>> + int dirty_count = atomic_read(&kvm->tlbs_dirty);
>> +
>> + smp_mb();
>> if (make_all_cpus_request(kvm, KVM_REQ_TLB_FLUSH))
>> ++kvm->stat.remote_tlb_flush;
>> + atomic_sub(dirty_count, &kvm->tlbs_dirty);
>> }
>
> This is racy because kvm_flush_remote_tlbs might be called without
> mmu_lock protection.
Sorry for my carelessness, it should be 'cmpxchg' here.
> You could decrease the counter on
> invalidate_page/invalidate_range_start only,
I want to avoid a unnecessary tlbs flush, if tlbs have been flushed
after sync_page, then we don't need flush tlbs on invalidate_page/
invalidate_range_start path.
> these are not fast paths
> anyway.
>
How about below patch? it just needs one atomic operation.
---
arch/x86/kvm/paging_tmpl.h | 4 ++--
include/linux/kvm_host.h | 2 ++
virt/kvm/kvm_main.c | 7 ++++++-
3 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index dfb906f..e64192f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -781,14 +781,14 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
gfn = gpte_to_gfn(gpte);
if (FNAME(map_invalid_gpte)(vcpu, sp, &sp->spt[i], gpte)) {
- kvm_flush_remote_tlbs(vcpu->kvm);
+ vcpu->kvm->tlbs_dirty++;
continue;
}
if (gfn != sp->gfns[i]) {
drop_spte(vcpu->kvm, &sp->spt[i],
shadow_trap_nonpresent_pte);
- kvm_flush_remote_tlbs(vcpu->kvm);
+ vcpu->kvm->tlbs_dirty++;
continue;
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 4bd663d..dafd90e 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -249,6 +249,7 @@ struct kvm {
struct mmu_notifier mmu_notifier;
unsigned long mmu_notifier_seq;
long mmu_notifier_count;
+ long tlbs_dirty;
#endif
};
@@ -377,6 +378,7 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu);
void kvm_resched(struct kvm_vcpu *vcpu);
void kvm_load_guest_fpu(struct kvm_vcpu *vcpu);
void kvm_put_guest_fpu(struct kvm_vcpu *vcpu);
+
void kvm_flush_remote_tlbs(struct kvm *kvm);
void kvm_reload_remote_mmus(struct kvm *kvm);
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index fb93ff9..fe0a1a7 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -168,8 +168,12 @@ static bool make_all_cpus_request(struct kvm *kvm, unsigned int req)
void kvm_flush_remote_tlbs(struct kvm *kvm)
{
+ long dirty_count = kvm->tlbs_dirty;
+
+ smp_mb();
if (make_all_cpus_request(kvm, KVM_REQ_TLB_FLUSH))
++kvm->stat.remote_tlb_flush;
+ cmpxchg(&kvm->tlbs_dirty, dirty_count, 0);
}
void kvm_reload_remote_mmus(struct kvm *kvm)
@@ -249,7 +253,7 @@ static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn,
idx = srcu_read_lock(&kvm->srcu);
spin_lock(&kvm->mmu_lock);
kvm->mmu_notifier_seq++;
- need_tlb_flush = kvm_unmap_hva(kvm, address);
+ need_tlb_flush = kvm_unmap_hva(kvm, address) | kvm->tlbs_dirty;
spin_unlock(&kvm->mmu_lock);
srcu_read_unlock(&kvm->srcu, idx);
@@ -293,6 +297,7 @@ static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn,
kvm->mmu_notifier_count++;
for (; start < end; start += PAGE_SIZE)
need_tlb_flush |= kvm_unmap_hva(kvm, start);
+ need_tlb_flush |= kvm->tlbs_dirty;
spin_unlock(&kvm->mmu_lock);
srcu_read_unlock(&kvm->srcu, idx);
--
1.7.0.4
next prev parent reply other threads:[~2010-11-22 3:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-19 9:01 [PATCH v3 1/6] KVM: MMU: fix forgot flush tlbs on sync_page path Xiao Guangrong
2010-11-19 9:02 ` [PATCH v3 2/6] KVM: MMU: don't drop spte if overwrite it from W to RO Xiao Guangrong
2010-11-19 9:03 ` [PATCH v3 3/6] KVM: MMU: rename 'reset_host_protection' to 'host_writable' Xiao Guangrong
2010-11-19 9:04 ` [PATCH v3 4/6] KVM: MMU: remove 'clear_unsync' parameter Xiao Guangrong
2010-11-19 9:04 ` [PATCH v3 5/6] KVM: MMU: abstract invalid guest pte mapping Xiao Guangrong
2010-11-22 9:28 ` Avi Kivity
2010-11-22 10:18 ` Xiao Guangrong
2010-11-22 10:17 ` Avi Kivity
2010-11-23 3:08 ` Xiao Guangrong
2010-11-19 9:05 ` [PATCH v3 6/6] KVM: MMU: delay flush all tlbs on sync_page path Xiao Guangrong
2010-11-19 16:11 ` Marcelo Tosatti
2010-11-22 3:45 ` Xiao Guangrong [this message]
2010-11-22 14:19 ` Marcelo Tosatti
2010-11-22 21:46 ` Marcelo Tosatti
2010-11-23 3:13 ` Xiao Guangrong
2010-11-26 1:37 ` [PATCH v3 1/6] KVM: MMU: fix forgot flush " Xiao Guangrong
2010-11-26 14:29 ` Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CE9E74E.7070908@cn.fujitsu.com \
--to=xiaoguangrong@cn.fujitsu.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.