From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4CEE7D0A.7050508@domain.hid> Date: Thu, 25 Nov 2010 16:13:14 +0100 From: Jan Kiszka MIME-Version: 1.0 References: <99ccb1608a0bd512c70a7d65a06888f2.squirrel@domain.hid> In-Reply-To: <99ccb1608a0bd512c70a7d65a06888f2.squirrel@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] help List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: George AFONSO Cc: xenomai@xenomai.org Am 25.11.2010 10:05, George AFONSO wrote: > Hello, > > I'm trying xenomai for my architecture. > I'm using a fedora 14 environment (2.6.35.6-45.fc14.i686 kernel) > The kernel version used for the compilation is 2.6.35.7 > The Xenomai version used is 2.5.5.2 > I configure the kernel, with no errors, i perform the make install with no > errors too. > > My processor : > > vendor_id : AuthenticAMD > cpu family : 15 > model : 107 > model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ > > When i restart my computer i have a kernel panic, do you have any reason > to explain that? > > start screen : > " > Pid: 1, comm swapper Tainted:G D 2.6.35.7 #2 > Call Trace : > panic+0x50/0xc5 > do_exist+0x61/0x60f > ? _raw_spin_unlock_irqrestore+0x13/0x15 > (...) > " > You'll find the kernel ".config" attached. > First of all, switch to an appropriate processor type, you are running with brakes applied (CONFIG_M686 - no TSC etc.). If the issue persists, please capture the full boot-up log, e.g. by redirecting the kernel console to a uart (see linux/Documentation/serial-console.txt). Jan -- Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux