Re: [PATCH v2] Bluetooth: Add new PID for Atheros 3011

[Bala Shanmugam <sbalashanmugam@atheros.com>]

Shanmugamkamatchi Balashanmugam wrote:
> Atheros 3011 has small sflash firmware and needs to be
> blacklisted in transport driver to load actual firmware
> in DFU driver.
>
> Signed-off-by: Bala Shanmugam <sbalashanmugam@atheros.com>
> ---
>  drivers/bluetooth/ath3k.c |    2 ++
>  drivers/bluetooth/btusb.c |    3 +++
>  2 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 128cae4..c70fb0b 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -35,6 +35,8 @@
>  static struct usb_device_id ath3k_table[] = {
>  	/* Atheros AR3011 */
>  	{ USB_DEVICE(0x0CF3, 0x3000) },
> +	/* Atheros AR3011 with sflash firmware*/
> +	{ USB_DEVICE(0x0CF3, 0x3002) },
>  	{ }	/* Terminating entry */
>  };
>  
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index ab3894f..ca3fdc1 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -99,6 +99,9 @@ static struct usb_device_id blacklist_table[] = {
>  	/* Broadcom BCM2033 without firmware */
>  	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
>  
> +	/* Atheros 3011 with sflash firmware */
> +	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
> +
>  	/* Broadcom BCM2035 */
>  	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
>  	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
>   
Please ignore this.
Will send a fresh patch.

Regards,
Bala.