From: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
To: Wolfgang Grandegger <wg@grandegger.com>,
Wolfram Sang <w.sang@pengutronix.de>,
Christian Pellegrin <chripell@fsfe.org>,
Barry Song <21cnbao@gmail.com>,
Samuel Ortiz <sameo@linux.intel.com>,
socketcan-core@lists.berlios.de, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
"David S. Miller" <davem@davemloft.net>
Cc: qi.wang@intel.com, yong.y.wang@intel.com,
andrew.chih.howe.khor@intel.com, joel.clark@intel.com,
kok.howg.ewe@intel.com, margie.foster@intel.com
Subject: [PATCH net-next-2.6 v6 18/20] can: EG20T PCH: Optimize "if" condition
Date: Tue, 30 Nov 2010 13:39:26 +0900 [thread overview]
Message-ID: <4CF47FFE.2060003@dsn.okisemi.com> (raw)
For reduce "if" condition, easy to read/understand the code,
optimize "if" condition in rx/tx processing.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
drivers/net/can/pch_can.c | 26 ++++++++++----------------
1 files changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 743385b..e11ec36 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -752,19 +752,16 @@ static int pch_can_poll(struct napi_struct *napi, int quota)
if (int_stat == PCH_STATUS_INT) {
reg_stat = ioread32(&priv->regs->stat);
- if (reg_stat & (PCH_BUS_OFF | PCH_LEC_ALL)) {
- if (reg_stat & PCH_BUS_OFF ||
- (reg_stat & PCH_LEC_ALL) != PCH_LEC_ALL) {
- pch_can_error(ndev, reg_stat);
- quota--;
- }
- }
- if (reg_stat & PCH_TX_OK)
- pch_can_bit_clear(&priv->regs->stat, PCH_TX_OK);
+ if ((reg_stat & (PCH_BUS_OFF | PCH_LEC_ALL)) &&
+ ((reg_stat & PCH_LEC_ALL) != PCH_LEC_ALL)) {
+ pch_can_error(ndev, reg_stat);
+ quota--;
+ }
- if (reg_stat & PCH_RX_OK)
- pch_can_bit_clear(&priv->regs->stat, PCH_RX_OK);
+ if (reg_stat & (PCH_TX_OK | PCH_RX_OK))
+ pch_can_bit_clear(&priv->regs->stat,
+ reg_stat & (PCH_TX_OK | PCH_RX_OK));
int_stat = pch_can_int_pending(priv);
}
@@ -906,14 +903,13 @@ static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev)
if (can_dropped_invalid_skb(ndev, skb))
return NETDEV_TX_OK;
+ tx_obj_no = priv->tx_obj;
if (priv->tx_obj == PCH_TX_OBJ_END) {
if (ioread32(&priv->regs->treq2) & PCH_TREQ2_TX_MASK)
netif_stop_queue(ndev);
- tx_obj_no = priv->tx_obj;
priv->tx_obj = PCH_TX_OBJ_START;
} else {
- tx_obj_no = priv->tx_obj;
priv->tx_obj++;
}
@@ -932,9 +928,7 @@ static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev)
id2 |= PCH_ID_MSGVAL;
/* If remote frame has to be transmitted.. */
- if (cf->can_id & CAN_RTR_FLAG)
- id2 &= ~PCH_ID2_DIR;
- else
+ if (!(cf->can_id & CAN_RTR_FLAG))
id2 |= PCH_ID2_DIR;
iowrite32(id2, &priv->regs->ifregs[1].id2);
--
1.6.0.6
next reply other threads:[~2010-11-30 4:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-30 4:39 Tomoya MORINAGA [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-11-30 4:39 [PATCH net-next-2.6 v6 18/20] can: EG20T PCH: Optimize "if" condition Tomoya MORINAGA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF47FFE.2060003@dsn.okisemi.com \
--to=tomoya-linux@dsn.okisemi.com \
--cc=21cnbao@gmail.com \
--cc=andrew.chih.howe.khor@intel.com \
--cc=chripell@fsfe.org \
--cc=davem@davemloft.net \
--cc=joel.clark@intel.com \
--cc=kok.howg.ewe@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=margie.foster@intel.com \
--cc=netdev@vger.kernel.org \
--cc=qi.wang@intel.com \
--cc=sameo@linux.intel.com \
--cc=socketcan-core@lists.berlios.de \
--cc=w.sang@pengutronix.de \
--cc=wg@grandegger.com \
--cc=yong.y.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.