From: Taku Izumi <izumi.taku@jp.fujitsu.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Jay Vosburgh <fubar@us.ibm.com>
Subject: [PATCH] bonding: add the sysfs interface to see RLB hash table
Date: Tue, 30 Nov 2010 19:01:41 +0900 [thread overview]
Message-ID: <4CF4CB85.4010708@jp.fujitsu.com> (raw)
This patch provides the sysfs interface to see RLB hash table
like the following:
# cat /sys/class/net/bond0/bonding/rlb_hash_table
SourceIP DestinationIP Destination MAC DEV
10.124.196.205 10.124.196. 81 00:19:99:XX:XX:XX eth3
10.124.196.205 10.124.196.222 00:0a:79:XX:XX:XX eth0
10.124.196.205 10.124.196. 75 00:15:17:XX:XX:XX eth4
10.124.196.205 10.124.196. 1 00:21:d8:XX:XX:XX eth3
10.124.196.205 10.124.196.205 ff:ff:ff:ff:ff:ff eth0
This is helpful to check if the receive load balancing works as expected.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
---
drivers/net/bonding/bond_sysfs.c | 56 +++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
Index: net-next/drivers/net/bonding/bond_sysfs.c
===================================================================
--- net-next.orig/drivers/net/bonding/bond_sysfs.c
+++ net-next/drivers/net/bonding/bond_sysfs.c
@@ -43,6 +43,7 @@
#include <linux/nsproxy.h>
#include "bonding.h"
+#include "bond_alb.h"
#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_bond(cd) ((struct bonding *)(netdev_priv(to_net_dev(cd))))
@@ -1643,6 +1644,60 @@ out:
static DEVICE_ATTR(resend_igmp, S_IRUGO | S_IWUSR,
bonding_show_resend_igmp, bonding_store_resend_igmp);
+/*
+ * Show RLB hash table
+ */
+#define RLB_NULL_INDEX 0xffffffff
+static ssize_t bonding_show_rlb_hashtable(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int count = 0;
+ struct bonding *bond = to_bond(d);
+ struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
+ struct rlb_client_info *client_info;
+ u32 hash_index;
+
+ if (bond->params.mode != BOND_MODE_ALB)
+ return count;
+
+ count += sprintf(buf + count, "SourceIP "
+ "DestinationIP Destination MAC DEV\n");
+
+ spin_lock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+ hash_index = bond_info->rx_hashtbl_head;
+ for (; hash_index != RLB_NULL_INDEX; hash_index = client_info->next) {
+ client_info = &(bond_info->rx_hashtbl[hash_index]);
+
+ count += sprintf(buf + count,
+ "%3d.%3d.%3d.%3d %3d.%3d.%3d.%3d "
+ "%02x:%02x:%02x:%02x:%02x:%02x %s\n",
+ client_info->ip_src & 0xff,
+ (client_info->ip_src >> 8) & 0xff,
+ (client_info->ip_src >> 16) & 0xff,
+ (client_info->ip_src >> 24) & 0xff,
+ client_info->ip_dst & 0xff,
+ (client_info->ip_dst >> 8) & 0xff,
+ (client_info->ip_dst >> 16) & 0xff,
+ (client_info->ip_dst >> 24) & 0xff,
+ client_info->mac_dst[0],
+ client_info->mac_dst[1],
+ client_info->mac_dst[2],
+ client_info->mac_dst[3],
+ client_info->mac_dst[4],
+ client_info->mac_dst[5],
+ client_info->slave->dev->name);
+ }
+
+ spin_unlock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+ return count;
+
+}
+static DEVICE_ATTR(rlb_hash_table, S_IRUGO, bonding_show_rlb_hashtable, NULL);
+
+
static struct attribute *per_bond_attrs[] = {
&dev_attr_slaves.attr,
&dev_attr_mode.attr,
@@ -1671,6 +1726,7 @@ static struct attribute *per_bond_attrs[
&dev_attr_queue_id.attr,
&dev_attr_all_slaves_active.attr,
&dev_attr_resend_igmp.attr,
+ &dev_attr_rlb_hash_table.attr,
NULL,
};
next reply other threads:[~2010-11-30 10:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-30 10:01 Taku Izumi [this message]
2010-11-30 10:10 ` [PATCH] bonding: add the sysfs interface to see RLB hash table Eric Dumazet
2010-11-30 18:37 ` Jay Vosburgh
2010-12-01 5:09 ` Taku Izumi
2010-12-01 5:03 ` Taku Izumi
2010-11-30 22:08 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF4CB85.4010708@jp.fujitsu.com \
--to=izumi.taku@jp.fujitsu.com \
--cc=fubar@us.ibm.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.