[U-Boot] OMAP: Hang after memory init, was: [STATUS] v2010.12-rc2 released

[Dirk Behme <dirk.behme@googlemail.com>]

On 03.12.2010 22:11, Carlo Caione wrote:
> On Thu, 2010-12-02 at 20:40 -0800, Prafulla Wadaskar wrote:
>>
>>> -----Original Message-----
>>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>>> On Behalf Of Carlo Caione
>>> Sent: Friday, December 03, 2010 3:11 AM
>>> To: U-Boot at lists.denx.de
>>> Subject: Re: [U-Boot] [STATUS] v2010.12-rc2 released
>>>
>>>> Some of the times, the boot hung after printing DRAM: 128 MiB,
>>>> but never did it hang without printing anything.
>>>
>>> The same here.
>>> Beagleboard xM rev.A hangs after DRAM: 256 MiB
>>
>> For fix this, needs to change global variables in timer.c
>> REF: http://lists.denx.de/pipermail/u-boot/2010-December/082834.html
>
> Applied but nothing is changed:
>
> Texas Instruments X-Loader 1.4.4ss (Dec  2 2010 - 21:40:58)
> Beagle xM Rev A
> Reading boot sector
> Loading u-boot.bin from mmc
>
>
> U-Boot 2010.12-rc2-00029-g49733aa-dirty (Dec 03 2010 - 22:05:44)
>
> OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
> OMAP3 Beagle board + LPDDR/NAND
> I2C:   ready
> DRAM:  512 MiB

I'm not totally sure, so sorry if I'm wrong. But:

I understood the link given by Prafulla above only as a reference what 
has to be done to fix the OMAP hang. I don't think the given patch 
fixes the issue itself. Most probably we additionally need something like

http://lists.denx.de/pipermail/u-boot/2010-December/082965.html

for OMAP, too?

Best regards

Dirk