Re: Run 'usermode-agent' cause kernel panic on Powerpc

[xufeng zhang <xufeng.zhang@windriver.com>]

On 12/07/2010 10:04 PM, Dave Kleikamp wrote:
> On Tue, 2010-12-07 at 14:48 +0800, xufeng zhang wrote:
>    
>> Hi Dave,
>>
>> I have a question with the below patch you made before:
>> ----------------------------------------
>> powerpc/booke: Add support for advanced debug registers
>>
>> From: Dave Kleikamp<shaggy@linux.vnet.ibm.com>
>>
>> Based on patches originally written by Torez Smith.
>> -----------------------------------------
>>
>> I meet a kernel panic problem while running 'usermode-agent' on PowerPC
>> ----------------------------------------
>> Oops: Exception in kernel mode, sig: 5 [#1]
>> PREEMPT LTT NESTING LEVEL : 0
>> MPC8536 DS
>> last sysfs file:
>> /sys/devices/f3000000.soc/f3003100.i2c/i2c-1/i2c-dev/i2c-1/dev
>> Modules linked in:
>> NIP: c00081a0 LR: c03a9560 CTR: c003547c
>> REGS: ef11bf10 TRAP: 2002   Not tainted  (2.6.34.6-WR4.0.0.0_standard)
>> MSR: 00021000<ME,CE>   CR: 44000624  XER: 00000000
>> TASK = efc1de00[752] 'usermode-agent' THREAD: ef63e000
>> GPR00: cc00cc00 ef63fe60 efc1de00 efc1de00 efc1f700 c04c8000 00258560
>> ffffffff
>> GPR08: ffda8a00 40000000 00001fda c0500000 49eaebbd 1008b654 3ff8a900
>> 00000000
>> GPR16: 00000000 eed84c40 c03b4570 c04ee4d0 c04ca870 ef63e03c 00000000
>> 00000000
>> GPR24: c04f7ee8 c04ee4c0 00000004 c04ca440 ef63e000 efc1f700 c04ca440
>> efc1de00
>> NIP [c00081a0] __switch_to+0xac/0x104
>> LR [c03a9560] schedule+0x20c/0x3f4
>> Call Trace:
>> [ef63fe60] [efc1f700] 0xefc1f700 (unreliable)
>> [ef63fe70] [c03a9560] schedule+0x20c/0x3f4
>> [ef63fec0] [c00429e0] do_wait+0x1a4/0x278
>> [ef63fef0] [c0042b44] sys_wait4+0x90/0xf8
>> [ef63ff40] [c00106d4] ret_from_syscall+0x0/0x4
>> ------------------------------------------
>>
>> Actually, this problem is caused by enabling On Chip Debugging, when On
>> Chip Debugging is enabled, we enable MSR_DE as below:
>> #define MSR_KERNEL      (MSR_ME|MSR_RI|MSR_CE|MSR_DE)
>>
>> If I comment out "mtspr(SPRN_DBCR0, thread->dbcr0);" in
>> prime_debug_regs() function,
>> then it will be ok.
>>
>> Here is my analysis for this problem:
>> Run 'usermode-agent' application will set Internal Debug Mode(IDM) and
>> Instruction Complete Debug Event(ICMP)flags for thread.
>> As MSR_DE is enabled, when execute context switching in prime_debug_regs(),
>> thread->dbcr0 would write to SPRN_DBCR0 register.
>> So this will enable Instruction Complete Debug Event interrupt, and it
>> will cause a kernel-mode
>> exception right now, it will be handled in native_DebugException(), then
>> kernel detected
>> this exception not happens in user-mode, lastly kernel call die() and
>> kill current process.
>>
>> So my question is could I just comment out "mtspr(SPRN_DBCR0,
>> thread->dbcr0);" in prime_debug_regs()?
>> I'm sure whether or not it will impose a bad impact on debugging.
>>      
> I believe it would have such an impact.  I don't see that user-mode
> debugging would be enabled at all.
>
> Maybe something like this untested patch:
>
> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
> index 84906d3..0e7d1cf 100644
> --- a/arch/powerpc/kernel/process.c
> +++ b/arch/powerpc/kernel/process.c
> @@ -323,6 +323,13 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
>
>   static void prime_debug_regs(struct thread_struct *thread)
>   {
> +	/*
> +	 * If we're setting up debug events for user space, make sure they
> +	 * don't fire in kernel space before we get to user space
> +	 */
> +	if (thread->dbcr0&  DBCR0_IDM)
> +		mtmsr(mfmsr()&  ~MSR_DE);
> +
>   	mtspr(SPRN_IAC1, thread->iac1);
>   	mtspr(SPRN_IAC2, thread->iac2);
>   #if CONFIG_PPC_ADV_DEBUG_IACS>  2
>
>    
Thanks for your reply, Dave, I know where the problem is.

Thanks,
Xufeng Zhang