All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>,
	Jeff Garzik <jeff@garzik.org>, Kyle McMartin <kyle@mcmartin.ca>
Cc: stable <stable@kernel.org>
Subject: [PATCH #upstream-fixes] libata: issue DIPM enable commands with LPM state updated
Date: Thu, 09 Dec 2010 16:13:15 +0100	[thread overview]
Message-ID: <4D00F20B.2080908@kernel.org> (raw)

Low level drivers may behave differently depending on the current
link->lpm_policy.  During ata_eh_set_lpm(), DIPM enable commands are
issued after the successful completion of ap->ops->set_lpm(), which
means that the controller is already in the target state.  This causes
DIPM enable commands to be processed with mismatching controller power
state and link->lpm_policy value.

In ahci, link->lpm_policy is used to ignore certain PHY events if LPM
is enabled; however, as DIPM commands are issued with stale
link->lpm_policy, they sometimes end up triggering these conditions
and get aborted leading to LPM configuration failure.

Fix it by updating link->lpm_policy before issuing DIPM enable
commands.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: stable@kernel.org
---
 drivers/ata/libata-eh.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5e59050..17a6378 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3275,6 +3275,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
 	struct ata_eh_context *ehc = &link->eh_context;
 	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+	enum ata_lpm_policy old_policy = link->lpm_policy;
 	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
 	unsigned int err_mask;
 	int rc;
@@ -3338,6 +3339,14 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 		goto fail;
 	}

+	/*
+	 * Low level driver acked the transition.  Issue DIPM command
+	 * with the new policy set.
+	 */
+	link->lpm_policy = policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = policy;
+
 	/* host config updated, enable DIPM if transitioning to MIN_POWER */
 	ata_for_each_dev(dev, link, ENABLED) {
 		if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
@@ -3353,12 +3362,14 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 		}
 	}

-	link->lpm_policy = policy;
-	if (ap && ap->slave_link)
-		ap->slave_link->lpm_policy = policy;
 	return 0;

 fail:
+	/* restore the old policy */
+	link->lpm_policy = old_policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = old_policy;
+
 	/* if no device or only one more chance is left, disable LPM */
 	if (!dev || ehc->tries[dev->devno] <= 2) {
 		ata_link_printk(link, KERN_WARNING,

             reply	other threads:[~2010-12-09 15:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-09 15:13 Tejun Heo [this message]
2010-12-24 18:38 ` [PATCH #upstream-fixes] libata: issue DIPM enable commands with LPM state updated Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D00F20B.2080908@kernel.org \
    --to=tj@kernel.org \
    --cc=jeff@garzik.org \
    --cc=kyle@mcmartin.ca \
    --cc=linux-ide@vger.kernel.org \
    --cc=stable@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.