From: Jin Dongming <jin.dongming@np.css.fujitsu.com>
To: Avi Kivity <avi@redhat.com>, Marcelo Tosatti <mtosatti@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>,
Huang Ying <ying.huang@intel.com>,
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>,
Dean Nelson <dnelson@redhat.com>, KVM list <kvm@vger.kernel.org>
Subject: [PATCH 3/3] kvm, x86: introduce kvm_inject_x86_mce_on
Date: Fri, 10 Dec 2010 17:25:20 +0900 [thread overview]
Message-ID: <4D01E3F0.7080305@np.css.fujitsu.com> (raw)
Pass a table instead of multiple args.
Note:
kvm_inject_x86_mce(env, bank, status, mcg_status, addr, misc,
abort_on_error);
is equal to:
struct kvm_x86_mce mce = {
.bank = bank,
.status = status,
.mcg_status = mcg_status,
.addr = addr,
.misc = misc,
};
kvm_inject_x86_mce_on(env, &mce, abort_on_error);
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
---
target-i386/kvm.c | 58 ++++++++++++++++++++++++++++++++--------------------
1 files changed, 36 insertions(+), 22 deletions(-)
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 1f3f369..b11337a 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -263,6 +263,23 @@ static void kvm_do_inject_x86_mce(void *_data)
}
}
+static void kvm_inject_x86_mce_on(CPUState *env, struct kvm_x86_mce *mce,
+ int flag)
+{
+ struct kvm_x86_mce_data data = {
+ .env = env,
+ .mce = mce,
+ .abort_on_error = (flag & ABORT_ON_ERROR),
+ };
+
+ if (!env->mcg_cap) {
+ fprintf(stderr, "MCE support is not enabled!\n");
+ return;
+ }
+
+ on_vcpu(env, kvm_do_inject_x86_mce, &data);
+}
+
static void kvm_mce_broadcast_rest(CPUState *env);
#endif
@@ -278,21 +295,11 @@ void kvm_inject_x86_mce(CPUState *cenv, int bank, uint64_t status,
.addr = addr,
.misc = misc,
};
- struct kvm_x86_mce_data data = {
- .env = cenv,
- .mce = &mce,
- };
-
- if (!cenv->mcg_cap) {
- fprintf(stderr, "MCE support is not enabled!\n");
- return;
- }
-
if (flag & MCE_BROADCAST) {
kvm_mce_broadcast_rest(cenv);
}
- on_vcpu(cenv, kvm_do_inject_x86_mce, &data);
+ kvm_inject_x86_mce_on(cenv, &mce, flag);
#else
if (flag & ABORT_ON_ERROR) {
abort();
@@ -1738,6 +1745,13 @@ static void hardware_memory_error(void)
#ifdef KVM_CAP_MCE
static void kvm_mce_broadcast_rest(CPUState *env)
{
+ struct kvm_x86_mce mce = {
+ .bank = 1,
+ .status = MCI_STATUS_VAL | MCI_STATUS_UC,
+ .mcg_status = MCG_STATUS_MCIP | MCG_STATUS_RIPV,
+ .addr = 0,
+ .misc = 0,
+ };
CPUState *cenv;
/* Broadcast MCA signal for processor version 06H_EH and above */
@@ -1746,9 +1760,7 @@ static void kvm_mce_broadcast_rest(CPUState *env)
if (cenv == env) {
continue;
}
- kvm_inject_x86_mce(cenv, 1, MCI_STATUS_VAL | MCI_STATUS_UC,
- MCG_STATUS_MCIP | MCG_STATUS_RIPV, 0, 0,
- ABORT_ON_ERROR);
+ kvm_inject_x86_mce_on(cenv, &mce, ABORT_ON_ERROR);
}
}
}
@@ -1797,15 +1809,17 @@ static void kvm_mce_inj_srao_memscrub(CPUState *env, target_phys_addr_t paddr)
static void kvm_mce_inj_srao_memscrub2(CPUState *env, target_phys_addr_t paddr)
{
- uint64_t status;
-
- status = MCI_STATUS_VAL | MCI_STATUS_UC | MCI_STATUS_EN
- | MCI_STATUS_MISCV | MCI_STATUS_ADDRV | MCI_STATUS_S
- | 0xc0;
- kvm_inject_x86_mce(env, 9, status,
- MCG_STATUS_MCIP | MCG_STATUS_RIPV, paddr,
- (MCM_ADDR_PHYS << 6) | 0xc, ABORT_ON_ERROR);
+ struct kvm_x86_mce mce = {
+ .bank = 9,
+ .status = MCI_STATUS_VAL | MCI_STATUS_UC | MCI_STATUS_EN
+ | MCI_STATUS_MISCV | MCI_STATUS_ADDRV | MCI_STATUS_S
+ | 0xc0,
+ .mcg_status = MCG_STATUS_MCIP | MCG_STATUS_RIPV,
+ .addr = paddr,
+ .misc = (MCM_ADDR_PHYS << 6) | 0xc,
+ };
+ kvm_inject_x86_mce_on(env, &mce, ABORT_ON_ERROR);
kvm_mce_broadcast_rest(env);
}
--
1.7.1.1
next reply other threads:[~2010-12-10 8:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-10 8:25 Jin Dongming [this message]
2010-12-20 11:29 ` [PATCH 3/3] kvm, x86: introduce kvm_inject_x86_mce_on Marcelo Tosatti
2010-12-20 23:57 ` Jin Dongming
-- strict thread matches above, loose matches on Subject: below --
2010-12-22 3:24 Jin Dongming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D01E3F0.7080305@np.css.fujitsu.com \
--to=jin.dongming@np.css.fujitsu.com \
--cc=andi@firstfloor.org \
--cc=avi@redhat.com \
--cc=dnelson@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=seto.hidetoshi@jp.fujitsu.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.