All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mayank Rana <mrana@codeaurora.org>
To: Greg KH <greg@kroah.com>
Cc: linux-serial@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	npelly@google.com
Subject: Re: [PATCH] serial: msm_serial_hs: Add MSM high speed UART driver
Date: Mon, 13 Dec 2010 12:38:20 +0530	[thread overview]
Message-ID: <4D05C664.3030605@codeaurora.org> (raw)
In-Reply-To: <20101125170113.GB17686@kroah.com>

On 11/25/2010 10:31 PM, Greg KH wrote:
> On Thu, Nov 25, 2010 at 12:00:35PM +0530, Mayank Rana wrote:
>>   This driver supports UART-DM HW on MSM platforms. It uses the on
>> chip DMA to drive data transfers and has optional support for UART
>> power management independent of Linux suspend/resume and wakeup
>> from Rx.
>>
>> The driver was originally developed by Google. It is functionally
>> equivalent to the version available at:
>> http://android.git.kernel.org/?p=kernel/experimental.git
>> the differences being:
>> 1) Remove wakelocks and change unsupported DMA API.
>> 2) Replace clock selection register codes by macros.
>> 3) Fix checkpatch errors and add inline documentation.
>> 4) Add runtime PM hooks for active power state transitions.
>>
>> CC: Nick Pelly<npelly@google.com>
>> Signed-off-by: Sankalp Bose<sankalpb@codeaurora.org>
>> Signed-off-by: Mayank Rana<mrana@codeaurora.org>
>> ---
>>   drivers/serial/Kconfig               |   12 +
>>   drivers/serial/Makefile              |    1 +
>>   drivers/serial/msm_serial_hs.c       | 1680
>> ++++++++++++++++++++++++++++++++++
>
> Your patch is line-wrapped and can not be applid.
>
> Please fix your email client and try again.
>
>
>>   drivers/serial/msm_serial_hs_hwreg.h |  167 ++++
>>   include/linux/msm_serial_hs.h        |   49 +
>>   5 files changed, 1909 insertions(+), 0 deletions(-)
>>   create mode 100644 drivers/serial/msm_serial_hs.c
>>   create mode 100644 drivers/serial/msm_serial_hs_hwreg.h
>>   create mode 100644 include/linux/msm_serial_hs.h
>>
>> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
>> index aff9dcd..0a935ee 100644
>> --- a/drivers/serial/Kconfig
>> +++ b/drivers/serial/Kconfig
>> @@ -1381,6 +1381,18 @@ config SERIAL_MSM_CONSOLE
>>       depends on SERIAL_MSM=y
>>       select SERIAL_CORE_CONSOLE
>>
>> +config SERIAL_MSM_HS
>> +    tristate "MSM UART High Speed: Serial Driver"
>> +    depends on ARM&&  ARCH_MSM
>> +    select SERIAL_CORE
>> +    help
>> +      If you have a machine based on MSM family of SoCs, you
>> +      can enable its onboard high speed serial port by enabling
>> +      this option.
>> +
>> +      Choose M here to compile it as a module. The module will be
>> +      called msm_serial_hs.
>> +
>>   config SERIAL_NETX
>>       tristate "NetX serial port support"
>>       depends on ARM&&  ARCH_NETX
>> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
>> index c570576..667de45 100644
>> --- a/drivers/serial/Makefile
>> +++ b/drivers/serial/Makefile
>> @@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
>>   obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
>>   obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
>>   obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
>> +obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
>>   obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
>>   obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
>>   obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
>> diff --git a/drivers/serial/msm_serial_hs.c
>> b/drivers/serial/msm_serial_hs.c
>> new file mode 100644
>> index 0000000..4fdc70e
>> --- /dev/null
>> +++ b/drivers/serial/msm_serial_hs.c
>> @@ -0,0 +1,1680 @@
>> +/* drivers/serial/msm_serial_hs.c
>> + *
>> + * MSM 7k/8k High speed uart driver
>> + *
>> + * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
>> + * Copyright (c) 2008 Google Inc.
>> + * Modified: Nick Pelly<npelly@google.com>
>
> I don't understand, Nick originally wrote it?  Or modified your version?
>
>> + *
>> + * All source code in this file is licensed under the following license
>> + * except where indicated.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>> + * See the GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, you can find it at http://www.fsf.org
>> + */
>> +
>> +/*
>> + * MSM 7k/8k High speed uart driver
>> + *
>> + * Has optional support for uart power management independent of linux
>> + * suspend/resume:
>> + *
>> + * RX wakeup.
>> + * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the
>> + * UART RX pin). This should only be used if there is not a wakeup
>> + * GPIO on the UART CTS, and the first RX byte is known (for example, with
>> the
>> + * Bluetooth Texas Instruments HCILL protocol), since the first RX byte
>> will
>> + * always be lost. RTS will be asserted even while the UART is off in this
>> mode
>> + * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq.
>> + */
>> +
>> +#include<linux/module.h>
>> +
>> +#include<linux/serial.h>
>> +#include<linux/serial_core.h>
>> +#include<linux/slab.h>
>> +#include<linux/init.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/irq.h>
>> +#include<linux/io.h>
>> +#include<linux/ioport.h>
>> +#include<linux/kernel.h>
>> +#include<linux/timer.h>
>> +#include<linux/clk.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/pm_runtime.h>
>> +#include<linux/dma-mapping.h>
>> +#include<linux/dmapool.h>
>> +#include<linux/wait.h>
>> +#include<linux/workqueue.h>
>> +
>> +#include<asm/atomic.h>
>> +#include<asm/irq.h>
>> +#include<asm/system.h>
>> +
>> +#include<mach/hardware.h>
>> +#include<mach/dma.h>
>> +#include<linux/msm_serial_hs.h>
>
> Please put this file in include/platform_data/ instead.
Greg,

Thanks for reviewing the patch.
Is there any particular reason not allowing msm_serial_hs.h as part of 
include/linux and need of moving same into as part of 
include/platform_data? I am seeing multiple driver doing same.
Can you please suggest on this ?

Regards,
_-_Mayank Rana_-_

-- 
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

  parent reply	other threads:[~2010-12-13  7:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-25  6:30 [PATCH] serial: msm_serial_hs: Add MSM high speed UART driver Mayank Rana
2010-11-25 17:01 ` Greg KH
2010-11-26 12:45   ` Mayank Rana
2010-12-13  7:08   ` Mayank Rana [this message]
2010-12-13 18:06     ` Greg KH
2010-12-13 19:26       ` David Brown
2010-12-13 19:39         ` Greg KH
  -- strict thread matches above, loose matches on Subject: below --
2010-11-24 10:09 Mayank Rana
2010-10-22  6:39 Sankalp Bose
2010-10-22 14:09 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D05C664.3030605@codeaurora.org \
    --to=mrana@codeaurora.org \
    --cc=greg@kroah.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=npelly@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.