From: Yusuke Goda <yusuke.goda.sx@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: mackerel: Add mmcif support
Date: Wed, 15 Dec 2010 04:08:05 +0000 [thread overview]
Message-ID: <4D083F25.8080806@renesas.com> (raw)
In-Reply-To: <w3p7hfw4po7.wl%kuninori.morimoto.gx@renesas.com>
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
---
arch/arm/mach-shmobile/board-mackerel.c | 61 +++++++++++++++++++++++++++++++
1 files changed, 61 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f62f9b9..efd7f14 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -34,6 +34,7 @@
#include <linux/mfd/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
@@ -481,6 +482,7 @@ static struct platform_device sdhi0_device = {
},
};
+#if !defined(CONFIG_MMC_SH_MMCIF)
/* SDHI1 */
static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
@@ -514,6 +516,7 @@ static struct platform_device sdhi1_device = {
.platform_data = &sdhi1_info,
},
};
+#endif
/* SDHI2 */
static struct sh_mobile_sdhi_info sdhi2_info = {
@@ -547,6 +550,47 @@ static struct platform_device sdhi2_device = {
},
};
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "MMCIF",
+ .start = 0xE6BD0000,
+ .end = 0xE6BD00FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC ERR */
+ .start = evt2irq(0x1ac0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC NOR */
+ .start = evt2irq(0x1ae0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NEEDS_POLL,
+ .get_cd = slot_cn7_get_cd,
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+
static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
@@ -556,8 +600,11 @@ static struct platform_device *mackerel_devices[] __initdata = {
&fsi_device,
&fsi_ak4643_device,
&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
&sdhi1_device,
+#endif
&sdhi2_device,
+ &sh_mmcif_device,
};
/* Keypad Initialization */
@@ -723,6 +770,7 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+#if !defined(CONFIG_MMC_SH_MMCIF)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request(GPIO_FN_SDHICLK1, NULL);
@@ -730,6 +778,7 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
+#endif
/* card detect pin for MMC slot (CN7) */
gpio_request(GPIO_PORT41, NULL);
gpio_direction_input(GPIO_PORT41);
@@ -742,6 +791,18 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID2_1, NULL);
gpio_request(GPIO_FN_SDHID2_0, NULL);
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCD0_0, NULL);
+ gpio_request(GPIO_FN_MMCD0_1, NULL);
+ gpio_request(GPIO_FN_MMCD0_2, NULL);
+ gpio_request(GPIO_FN_MMCD0_3, NULL);
+ gpio_request(GPIO_FN_MMCD0_4, NULL);
+ gpio_request(GPIO_FN_MMCD0_5, NULL);
+ gpio_request(GPIO_FN_MMCD0_6, NULL);
+ gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCCMD0, NULL);
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(1, i2c1_devices,
--
1.5.6.5
next prev parent reply other threads:[~2010-12-15 4:08 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-29 6:19 [PATCH] ARM: mach-shmobile: mackerel: Add lost GPIO_FN_LCDD 18 - 23 Kuninori Morimoto
2010-11-29 8:26 ` Paul Mundt
2010-11-30 4:37 ` [PATCH] ARM: mach-shmobile: mackerel: Add USB1(Host) support Kuninori Morimoto
2010-11-30 5:18 ` Paul Mundt
2010-11-30 6:52 ` [PATCH] ARM: mach-shmobile: mackerel: Add LEDs support Kuninori Morimoto
2010-12-01 0:31 ` [PATCH] ARM: mach-shmobile: mackerel: Add FSI-AK4643 support Kuninori Morimoto
2010-12-01 7:09 ` [PATCH] ARM: mach-shmobile: mackerel: Add LEDs support Paul Mundt
2010-12-07 9:12 ` [PATCH] ARM: mach-shmobile: mackerel: Add Accelerometer sensor support sim.chinyeow
2010-12-08 5:37 ` Paul Mundt
2010-12-09 1:55 ` [PATCH] ARM: mach-shmobile: mackerel: Add keypad tca6408a support chinyeow.sim.xt
2010-12-13 5:10 ` Paul Mundt
2010-12-14 5:18 ` [PATCH] ARM: mach-shmobile: mackerel: Add sdhi support Yusuke Goda
2010-12-14 9:50 ` Paul Mundt
2010-12-15 4:08 ` Yusuke Goda [this message]
2010-12-15 6:02 ` [PATCH] ARM: mach-shmobile: mackerel: Add mmcif support Paul Mundt
2010-12-15 6:40 ` Magnus Damm
2010-12-15 6:43 ` Magnus Damm
2010-12-15 7:35 ` Yusuke Goda
2010-12-15 7:39 ` Magnus Damm
2010-12-15 7:59 ` Yusuke Goda
2010-12-20 1:06 ` [PATCH] ARM: mach-shmobile: mackerel: Add GPS support Yusuke Goda
2010-12-20 16:15 ` Paul Mundt
2010-12-23 6:36 ` [PATCH] ARM: mach-shmobile: mackerel: Add sdhi support Simon Horman
2011-01-07 9:48 ` [PATCH] ARM: mach-shmobile: mackerel: Add support get_cd in CN23 Yusuke Goda
2011-01-11 0:47 ` [PATCH] ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support chinyeow.sim.xt
2011-01-11 3:53 ` [PATCH] ARM: mach-shmobile: mackerel: Add support get_cd in CN23 Paul Mundt
2011-01-11 3:57 ` [PATCH] ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support Paul Mundt
2011-01-11 9:27 ` [PATCH] ARM: mach-shmobile: mackerel: Add sdhi support Yusuke Goda
2011-01-11 22:48 ` Simon Horman
2012-01-19 0:37 ` [PATCH] ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D083F25.8080806@renesas.com \
--to=yusuke.goda.sx@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.