From: Tejun Heo <teheo@suse.de>
To: James Bottomley <James.Bottomley@suse.de>
Cc: Linux SCSI List <linux-scsi@vger.kernel.org>,
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] scsi: don't use execute_in_process_context()
Date: Wed, 15 Dec 2010 20:46:58 +0100 [thread overview]
Message-ID: <4D091B32.4020309@suse.de> (raw)
In-Reply-To: <4D091A20.3060202@kernel.org>
On 12/15/2010 08:42 PM, Tejun Heo wrote:
> Yeap, that's an interesting point actually. I just sent the patch
Hmm... I remember sending but don't see it anywhere. Where did it go?
Anyways, here it is again.
---
drivers/scsi/scsi.c | 15 +++++++++++++--
drivers/scsi/scsi_scan.c | 26 +++++++++++++-------------
drivers/scsi/scsi_sysfs.c | 8 +++++---
include/scsi/scsi_device.h | 6 ++++--
4 files changed, 35 insertions(+), 20 deletions(-)
Index: work/drivers/scsi/scsi_scan.c
===================================================================
--- work.orig/drivers/scsi/scsi_scan.c
+++ work/drivers/scsi/scsi_scan.c
@@ -362,6 +362,16 @@ int scsi_is_target_device(const struct d
}
EXPORT_SYMBOL(scsi_is_target_device);
+static void scsi_target_reap_usercontext(struct work_struct *work)
+{
+ struct scsi_target *starget =
+ container_of(work, struct scsi_target, reap_work);
+
+ transport_remove_device(&starget->dev);
+ device_del(&starget->dev);
+ scsi_target_destroy(starget);
+}
+
static struct scsi_target *__scsi_find_target(struct device *parent,
int channel, uint id)
{
@@ -427,6 +437,7 @@ static struct scsi_target *scsi_alloc_ta
starget->state = STARGET_CREATED;
starget->scsi_level = SCSI_2;
starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
+ INIT_WORK(&starget->reap_work, scsi_target_reap_usercontext);
retry:
spin_lock_irqsave(shost->host_lock, flags);
@@ -462,21 +473,11 @@ static struct scsi_target *scsi_alloc_ta
}
/* Unfortunately, we found a dying target; need to
* wait until it's dead before we can get a new one */
+ flush_work(&found_target->reap_work);
put_device(&found_target->dev);
- flush_scheduled_work();
goto retry;
}
-static void scsi_target_reap_usercontext(struct work_struct *work)
-{
- struct scsi_target *starget =
- container_of(work, struct scsi_target, ew.work);
-
- transport_remove_device(&starget->dev);
- device_del(&starget->dev);
- scsi_target_destroy(starget);
-}
-
/**
* scsi_target_reap - check to see if target is in use and destroy if not
* @starget: target to be checked
@@ -507,8 +508,7 @@ void scsi_target_reap(struct scsi_target
if (state == STARGET_CREATED)
scsi_target_destroy(starget);
else
- execute_in_process_context(scsi_target_reap_usercontext,
- &starget->ew);
+ queue_work(scsi_wq, &starget->reap_work);
}
/**
Index: work/drivers/scsi/scsi_sysfs.c
===================================================================
--- work.orig/drivers/scsi/scsi_sysfs.c
+++ work/drivers/scsi/scsi_sysfs.c
@@ -300,7 +300,7 @@ static void scsi_device_dev_release_user
struct list_head *this, *tmp;
unsigned long flags;
- sdev = container_of(work, struct scsi_device, ew.work);
+ sdev = container_of(work, struct scsi_device, release_work);
parent = sdev->sdev_gendev.parent;
starget = to_scsi_target(parent);
@@ -343,8 +343,8 @@ static void scsi_device_dev_release_user
static void scsi_device_dev_release(struct device *dev)
{
struct scsi_device *sdp = to_scsi_device(dev);
- execute_in_process_context(scsi_device_dev_release_usercontext,
- &sdp->ew);
+
+ queue_work(scsi_wq, &sdp->release_work);
}
static struct class sdev_class = {
@@ -1069,6 +1069,8 @@ void scsi_sysfs_device_initialize(struct
dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
sdev->scsi_level = starget->scsi_level;
+ INIT_WORK(&sdev->release_work, scsi_device_dev_release_usercontext);
+
transport_setup_device(&sdev->sdev_gendev);
spin_lock_irqsave(shost->host_lock, flags);
list_add_tail(&sdev->same_target_siblings, &starget->devices);
Index: work/include/scsi/scsi_device.h
===================================================================
--- work.orig/include/scsi/scsi_device.h
+++ work/include/scsi/scsi_device.h
@@ -168,7 +168,7 @@ struct scsi_device {
struct device sdev_gendev,
sdev_dev;
- struct execute_work ew; /* used to get process context on put */
+ struct work_struct release_work; /* for process context on put */
struct scsi_dh_data *scsi_dh_data;
enum scsi_device_state sdev_state;
@@ -258,7 +258,7 @@ struct scsi_target {
#define SCSI_DEFAULT_TARGET_BLOCKED 3
char scsi_level;
- struct execute_work ew;
+ struct work_struct reap_work;
enum scsi_target_state state;
void *hostdata; /* available to low-level driver */
unsigned long starget_data[0]; /* for the transport */
@@ -276,6 +276,8 @@ static inline struct scsi_target *scsi_t
#define starget_printk(prefix, starget, fmt, a...) \
dev_printk(prefix, &(starget)->dev, fmt, ##a)
+extern struct workqueue_struct *scsi_wq;
+
extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
uint, uint, uint, void *hostdata);
extern int scsi_add_device(struct Scsi_Host *host, uint channel,
Index: work/drivers/scsi/scsi.c
===================================================================
--- work.orig/drivers/scsi/scsi.c
+++ work/drivers/scsi/scsi.c
@@ -70,6 +70,11 @@
#define CREATE_TRACE_POINTS
#include <trace/events/scsi.h>
+/*
+ * Utility multithreaded workqueue for SCSI.
+ */
+struct workqueue_struct *scsi_wq;
+
static void scsi_done(struct scsi_cmnd *cmd);
/*
@@ -1306,11 +1311,14 @@ MODULE_PARM_DESC(scsi_logging_level, "a
static int __init init_scsi(void)
{
- int error;
+ int error = -ENOMEM;
+ scsi_wq = alloc_workqueue("scsi", 0, 0);
+ if (!scsi_wq)
+ return error;
error = scsi_init_queue();
if (error)
- return error;
+ goto cleanup_wq;
error = scsi_init_procfs();
if (error)
goto cleanup_queue;
@@ -1342,6 +1350,8 @@ cleanup_procfs:
scsi_exit_procfs();
cleanup_queue:
scsi_exit_queue();
+cleanup_wq:
+ destroy_workqueue(scsi_wq);
printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
-error);
return error;
@@ -1356,6 +1366,7 @@ static void __exit exit_scsi(void)
scsi_exit_devinfo();
scsi_exit_procfs();
scsi_exit_queue();
+ destroy_workqueue(scsi_wq);
}
subsys_initcall(init_scsi);
next prev parent reply other threads:[~2010-12-15 19:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-19 12:57 [PATCH 1/2] scsi: remove bogus use of struct execute_work in sg Tejun Heo
2010-10-19 12:58 ` [PATCH 2/2] scsi: don't use execute_in_process_context() Tejun Heo
2010-10-22 10:03 ` FUJITA Tomonori
2010-12-12 22:48 ` James Bottomley
2010-12-14 9:53 ` Tejun Heo
2010-12-14 14:09 ` James Bottomley
2010-12-14 14:19 ` Tejun Heo
2010-12-14 14:26 ` James Bottomley
2010-12-14 14:33 ` Tejun Heo
2010-12-15 3:04 ` James Bottomley
2010-12-15 15:47 ` Tejun Heo
2010-12-15 15:54 ` James Bottomley
2010-12-15 16:00 ` Tejun Heo
2010-12-15 17:22 ` James Bottomley
2010-12-15 19:05 ` Tejun Heo
2010-12-15 19:10 ` James Bottomley
2010-12-15 19:19 ` Tejun Heo
2010-12-15 19:33 ` James Bottomley
2010-12-15 19:42 ` Tejun Heo
2010-12-15 19:46 ` Tejun Heo [this message]
2010-12-16 14:39 ` James Bottomley
2010-12-16 15:51 ` Tejun Heo
2010-12-15 19:34 ` Tejun Heo
2010-10-20 14:29 ` [PATCH 1/2] scsi: remove bogus use of struct execute_work in sg FUJITA Tomonori
2010-10-20 19:56 ` Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D091B32.4020309@suse.de \
--to=teheo@suse.de \
--cc=James.Bottomley@suse.de \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.