* [Cluster-devel] [PATCH] STABLE31 config: Update fence-agents section from fence-agents.git
@ 2010-12-16 15:24 Lon Hohberger
2010-12-16 19:30 ` Fabio M. Di Nitto
0 siblings, 1 reply; 2+ messages in thread
From: Lon Hohberger @ 2010-12-16 15:24 UTC (permalink / raw)
To: cluster-devel.redhat.com
Signed-off-by: Lon Hohberger <lhh@redhat.com>
---
config/tools/xml/cluster.rng.in | 588 ++++++++++++++++++++++++---------------
1 files changed, 361 insertions(+), 227 deletions(-)
diff --git a/config/tools/xml/cluster.rng.in b/config/tools/xml/cluster.rng.in
index 0562671..04906c9 100644
--- a/config/tools/xml/cluster.rng.in
+++ b/config/tools/xml/cluster.rng.in
@@ -2642,7 +2642,8 @@ To validate your cluster.conf against this schema, run:
<!-- end non-generated device definitions -->
<!-- begin auto-generated device definitions -->
- <group rha:fence_agent="fence_vmware">
+ <!-- fence_alom -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -2662,22 +2663,93 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
+ <attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
- <attribute name="exec" rha:description="Command to execute" />
+ <attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="vmware_type" rha:description="Type of VMware to connect" />
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ </optional>
+ <optional>
+ <attribute name="verbose" rha:description="Verbose mode" />
+ </optional>
+ <optional>
+ <attribute name="debug" rha:description="Write debug information to given file" />
+ </optional>
+ <optional>
+ <attribute name="version" rha:description="Display version information and exit" />
+ </optional>
+ <optional>
+ <attribute name="help" rha:description="Display help and exit" />
+ </optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ </optional>
+ </group>
+
+
+ <!-- fence_apc -->
+ <group>
+ <optional>
+ <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
+ </optional>
+ <optional>
+ <attribute name="action" rha:description="Fencing Action" />
+ </optional>
+ <optional>
+ <attribute name="ipaddr" rha:description="IP Address or Hostname" />
+ </optional>
+ <optional>
+ <attribute name="login" rha:description="Login Name" />
+ </optional>
+ <optional>
+ <attribute name="passwd" rha:description="Login password or passphrase" />
+ </optional>
+ <optional>
+ <attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
<attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
+ </optional>
+ <optional>
<attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" />
+ <attribute name="switch" rha:description="Physical switch number on device" />
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
</optional>
<optional>
<attribute name="verbose" rha:description="Verbose mode" />
@@ -2698,7 +2770,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2707,15 +2779,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <group rha:fence_agent="fence_lpar">
+ <!-- fence_apc_snmp -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -2735,31 +2808,37 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="secure" rha:description="SSH connection" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
- <attribute name="identity_file" rha:description="Identity file for ssh" />
+ <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
</optional>
<optional>
- <attribute name="partition" rha:description="Partition name" />
+ <attribute name="community" rha:description="Set the community string" />
</optional>
<optional>
- <attribute name="managed" rha:description="Managed system name" />
+ <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
</optional>
<optional>
- <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" />
+ <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
</optional>
<optional>
- <attribute name="cmd_prompt" rha:description="Force command prompt" />
+ <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
</optional>
<optional>
- <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
<attribute name="verbose" rha:description="Verbose mode" />
@@ -2780,7 +2859,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2789,15 +2868,17 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_baytech -->
- <group rha:fence_agent="fence_bladecenter">
+ <!-- fence_bladecenter -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -2856,7 +2937,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2868,15 +2949,18 @@ To validate your cluster.conf against this schema, run:
<attribute name="missing_as_off" rha:description="Missing port returns OFF instead of failure" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_brocade -->
+ <!-- No metadata for fence_bullpap -->
- <group rha:fence_agent="fence_intelmodular">
+ <!-- fence_cisco_mds -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -2947,7 +3031,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -2956,15 +3040,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <group rha:fence_agent="fence_ifmib">
+ <!-- fence_cisco_ucs -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -2984,31 +3069,89 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
+ <attribute name="ssl" rha:description="SSL connection" />
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ </optional>
+ <optional>
<attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
- <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
+ <attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
- <attribute name="community" rha:description="Set the community string" />
+ <attribute name="debug" rha:description="Write debug information to given file" />
</optional>
<optional>
- <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
+ <attribute name="version" rha:description="Display version information and exit" />
</optional>
<optional>
- <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
+ <attribute name="help" rha:description="Display help and exit" />
</optional>
<optional>
- <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
+ <attribute name="separator" rha:description="Separator for CSV created by operation list" />
</optional>
<optional>
- <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
+ <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
+ <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ </optional>
+ </group>
+
+ <!-- No metadata for fence_cpint -->
+ <!-- No metadata for fence_drac -->
+
+ <!-- fence_drac5 -->
+ <group>
+ <optional>
+ <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
+ </optional>
+ <optional>
+ <attribute name="action" rha:description="Fencing Action" />
+ </optional>
+ <optional>
+ <attribute name="ipaddr" rha:description="IP Address or Hostname" />
+ </optional>
+ <optional>
+ <attribute name="login" rha:description="Login Name" />
+ </optional>
+ <optional>
+ <attribute name="passwd" rha:description="Login password or passphrase" />
+ </optional>
+ <optional>
+ <attribute name="passwd_script" rha:description="Script to retrieve password" />
+ </optional>
+ <optional>
+ <attribute name="cmd_prompt" rha:description="Force command prompt" />
+ </optional>
+ <optional>
+ <attribute name="secure" rha:description="SSH connection" />
+ </optional>
+ <optional>
+ <attribute name="identity_file" rha:description="Identity file for ssh" />
+ </optional>
+ <optional>
+ <attribute name="drac_version" rha:description="Force DRAC version to use" />
+ </optional>
+ <optional>
+ <attribute name="module_name" rha:description="DRAC/MC module name" />
</optional>
<optional>
<attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3017,6 +3160,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
@@ -3035,7 +3181,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3044,15 +3190,17 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_egenera -->
- <group rha:fence_agent="fence_eps">
+ <!-- fence_eps -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3075,6 +3223,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
+ <attribute name="hidden_page" rha:description="Name of hidden page" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
@@ -3090,15 +3241,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="separator" rha:description="Separator for CSV created by operation list" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <group rha:fence_agent="fence_ldom">
+ <!-- fence_ibmblade -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3118,25 +3270,37 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="secure" rha:description="SSH connection" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
- <attribute name="identity_file" rha:description="Identity file for ssh" />
+ <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
+ <attribute name="community" rha:description="Set the community string" />
</optional>
<optional>
- <attribute name="cmd_prompt" rha:description="Force command prompt" />
+ <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
</optional>
<optional>
- <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
+ </optional>
+ <optional>
+ <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
+ </optional>
+ <optional>
+ <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
<attribute name="verbose" rha:description="Verbose mode" />
@@ -3157,7 +3321,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3166,18 +3330,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_xcat -->
- <!-- No metadata for fence_rackswitch -->
- <!-- No metadata for fence_rsb -->
- <group rha:fence_agent="fence_bladecenter_snmp">
+ <!-- fence_ifmib -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3248,7 +3410,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3257,18 +3419,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_cpint -->
- <!-- No metadata for fence_drac -->
- <!-- No metadata for fence_ipmilan -->
- <group rha:fence_agent="fence_rsa">
+ <!-- fence_ilo -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3288,13 +3448,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="cmd_prompt" rha:description="Force command prompt" />
+ <attribute name="ssl" rha:description="SSL connection" />
</optional>
<optional>
- <attribute name="secure" rha:description="SSH connection" />
+ <attribute name="ribcl" rha:description="Force ribcl version to use" />
</optional>
<optional>
- <attribute name="identity_file" rha:description="Identity file for ssh" />
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
<attribute name="ipport" rha:description="TCP port to use for connection with device" />
@@ -3315,7 +3478,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3324,15 +3487,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <group rha:fence_agent="fence_virsh">
+ <!-- fence_ilo_mp -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3358,16 +3522,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
+ <attribute name="cmd_prompt" rha:description="Force command prompt" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
</optional>
<optional>
- <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
<attribute name="verbose" rha:description="Verbose mode" />
@@ -3388,7 +3552,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3397,17 +3561,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_mcdata -->
- <!-- No metadata for fence_bullpap -->
- <group rha:fence_agent="fence_wti">
+ <!-- fence_intelmodular -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3427,25 +3590,37 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="cmd_prompt" rha:description="Force command prompt" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
- <attribute name="secure" rha:description="SSH connection" />
+ <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
</optional>
<optional>
- <attribute name="identity_file" rha:description="Identity file for ssh" />
+ <attribute name="community" rha:description="Set the community string" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
+ <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
</optional>
<optional>
- <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
+ </optional>
+ <optional>
+ <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
+ </optional>
+ <optional>
+ <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
<attribute name="verbose" rha:description="Verbose mode" />
@@ -3466,7 +3641,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3475,16 +3650,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_zvm -->
- <group rha:fence_agent="fence_drac5">
+ <!-- fence_ldom -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3504,19 +3679,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="cmd_prompt" rha:description="Force command prompt" />
- </optional>
- <optional>
<attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
<attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="drac_version" rha:description="Force DRAC version to use" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
- <attribute name="module_name" rha:description="DRAC/MC module name" />
+ <attribute name="cmd_prompt" rha:description="Force command prompt" />
</optional>
<optional>
<attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3546,7 +3718,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3555,43 +3727,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
- </optional>
- <optional>
<attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
- </group>
-
- <!-- No metadata for fence_vixel -->
- <!-- No metadata for fence_baytech -->
-
- <group rha:fence_agent="fence_scsi">
- <optional>
- <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
- </optional>
- <optional>
- <attribute name="aptpl" rha:description="Use APTPL flag for registrations" />
- </optional>
- <optional>
- <attribute name="devices" rha:description="List of devices to be used for fencing action" />
- </optional>
- <optional>
- <attribute name="logfile" rha:description="File to write error/debug messages" />
- </optional>
- <optional>
- <attribute name="key" rha:description="Key value to be used for fencing action" />
- </optional>
- <optional>
- <attribute name="action" rha:description="Fencing action" />
- </optional>
<optional>
- <attribute name="nodename" rha:description="Name of node" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_brocade -->
- <group rha:fence_agent="fence_ilo_mp">
+ <!-- fence_lpar -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3617,10 +3762,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="cmd_prompt" rha:description="Force command prompt" />
+ <attribute name="partition" rha:description="Partition name" />
</optional>
<optional>
- <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ <attribute name="managed" rha:description="Managed system name" />
+ </optional>
+ <optional>
+ <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" />
+ </optional>
+ <optional>
+ <attribute name="cmd_prompt" rha:description="Force command prompt" />
</optional>
<optional>
<attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3629,6 +3780,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
@@ -3647,7 +3801,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3656,15 +3810,19 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_ack_manual -->
+ <!-- No metadata for fence_mcdata -->
+ <!-- No metadata for fence_rackswitch -->
- <group rha:fence_agent="fence_apc">
+ <!-- fence_rhevm -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3684,16 +3842,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="secure" rha:description="SSH connection" />
- </optional>
- <optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
- </optional>
- <optional>
- <attribute name="identity_file" rha:description="Identity file for ssh" />
- </optional>
- <optional>
- <attribute name="switch" rha:description="Physical switch number on device" />
+ <attribute name="ssl" rha:description="SSL connection" />
</optional>
<optional>
<attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3705,6 +3854,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="ipport" rha:description="TCP port to use for connection with device" />
</optional>
<optional>
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
@@ -3720,27 +3872,25 @@ To validate your cluster.conf against this schema, run:
<attribute name="separator" rha:description="Separator for CSV created by operation list" />
</optional>
<optional>
- <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
+ <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
- <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
<attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
- <optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
- </optional>
</group>
- <group rha:fence_agent="fence_alom">
+ <!-- fence_rsa -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3760,16 +3910,13 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="secure" rha:description="SSH connection" />
- </optional>
- <optional>
- <attribute name="identity_file" rha:description="Identity file for ssh" />
+ <attribute name="cmd_prompt" rha:description="Force command prompt" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ <attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ <attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
<attribute name="ipport" rha:description="TCP port to use for connection with device" />
@@ -3790,7 +3937,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3799,16 +3946,17 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_ibmblade -->
+ <!-- No metadata for fence_rsb -->
- <group rha:fence_agent="fence_sanbox2">
+ <!-- fence_sanbox2 -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3855,7 +4003,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3864,16 +4012,17 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
- <!-- No metadata for fence_egenera -->
+ <!-- No metadata for fence_scsi -->
- <group rha:fence_agent="fence_apc_snmp">
+ <!-- fence_virsh -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3893,31 +4042,13 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
- </optional>
- <optional>
- <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
- </optional>
- <optional>
- <attribute name="community" rha:description="Set the community string" />
- </optional>
- <optional>
- <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
- </optional>
- <optional>
- <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
- </optional>
- <optional>
- <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
- </optional>
- <optional>
- <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
+ <attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
- <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
+ <attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
<attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -3926,6 +4057,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
@@ -3944,7 +4078,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -3953,15 +4087,17 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_vixel -->
- <group rha:fence_agent="fence_ilo">
+ <!-- fence_vmware -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -3981,19 +4117,22 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="ssl" rha:description="SSL connection" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
- <attribute name="ribcl" rha:description="Force ribcl version to use" />
+ <attribute name="exec" rha:description="Command to execute" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
+ <attribute name="vmware_type" rha:description="Type of VMware to connect" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
+ <attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
- <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ <attribute name="identity_file" rha:description="Identity file for ssh" />
+ </optional>
+ <optional>
+ <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" />
</optional>
<optional>
<attribute name="verbose" rha:description="Verbose mode" />
@@ -4008,10 +4147,13 @@ To validate your cluster.conf against this schema, run:
<attribute name="help" rha:description="Display help and exit" />
</optional>
<optional>
+ <attribute name="separator" rha:description="Separator for CSV created by operation list" />
+ </optional>
+ <optional>
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -4020,15 +4162,17 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_vmware_helper -->
- <group rha:fence_agent="fence_cisco_mds">
+ <!-- fence_wti -->
+ <group>
<optional>
<attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
</optional>
@@ -4048,31 +4192,16 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to retrieve password" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
- </optional>
- <optional>
- <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
- </optional>
- <optional>
- <attribute name="community" rha:description="Set the community string" />
- </optional>
- <optional>
- <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
- </optional>
- <optional>
- <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
- </optional>
- <optional>
- <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
+ <attribute name="cmd_prompt" rha:description="Force command prompt" />
</optional>
<optional>
- <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
+ <attribute name="secure" rha:description="SSH connection" />
</optional>
<optional>
- <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
+ <attribute name="identity_file" rha:description="Identity file for ssh" />
</optional>
<optional>
- <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
+ <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
</optional>
<optional>
<attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
@@ -4081,6 +4210,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
</optional>
<optional>
+ <attribute name="ipport" rha:description="TCP port to use for connection with device" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode" />
</optional>
<optional>
@@ -4099,7 +4231,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
+ <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
</optional>
<optional>
<attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
@@ -4108,13 +4240,15 @@ To validate your cluster.conf against this schema, run:
<attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
+ <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
</optional>
<optional>
- <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
+ <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
</optional>
</group>
+ <!-- No metadata for fence_xcat -->
+ <!-- No metadata for fence_zvm -->
<!-- end auto-generated device definitions -->
<group>
--
1.7.2.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [Cluster-devel] [PATCH] STABLE31 config: Update fence-agents section from fence-agents.git
2010-12-16 15:24 [Cluster-devel] [PATCH] STABLE31 config: Update fence-agents section from fence-agents.git Lon Hohberger
@ 2010-12-16 19:30 ` Fabio M. Di Nitto
0 siblings, 0 replies; 2+ messages in thread
From: Fabio M. Di Nitto @ 2010-12-16 19:30 UTC (permalink / raw)
To: cluster-devel.redhat.com
Looks OK to me. ACK
On 12/16/2010 04:24 PM, Lon Hohberger wrote:
> Signed-off-by: Lon Hohberger <lhh@redhat.com>
> ---
> config/tools/xml/cluster.rng.in | 588 ++++++++++++++++++++++++---------------
> 1 files changed, 361 insertions(+), 227 deletions(-)
>
> diff --git a/config/tools/xml/cluster.rng.in b/config/tools/xml/cluster.rng.in
> index 0562671..04906c9 100644
> --- a/config/tools/xml/cluster.rng.in
> +++ b/config/tools/xml/cluster.rng.in
> @@ -2642,7 +2642,8 @@ To validate your cluster.conf against this schema, run:
> <!-- end non-generated device definitions -->
>
> <!-- begin auto-generated device definitions -->
> - <group rha:fence_agent="fence_vmware">
> + <!-- fence_alom -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -2662,22 +2663,93 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> + <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> - <attribute name="exec" rha:description="Command to execute" />
> + <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="vmware_type" rha:description="Type of VMware to connect" />
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + </optional>
> + <optional>
> + <attribute name="verbose" rha:description="Verbose mode" />
> + </optional>
> + <optional>
> + <attribute name="debug" rha:description="Write debug information to given file" />
> + </optional>
> + <optional>
> + <attribute name="version" rha:description="Display version information and exit" />
> + </optional>
> + <optional>
> + <attribute name="help" rha:description="Display help and exit" />
> + </optional>
> + <optional>
> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> + </optional>
> + <optional>
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> + </optional>
> + <optional>
> + <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> + </optional>
> + <optional>
> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> + </optional>
> + <optional>
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + </optional>
> + <optional>
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + </optional>
> + </group>
> +
> +
> + <!-- fence_apc -->
> + <group>
> + <optional>
> + <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> + </optional>
> + <optional>
> + <attribute name="action" rha:description="Fencing Action" />
> + </optional>
> + <optional>
> + <attribute name="ipaddr" rha:description="IP Address or Hostname" />
> + </optional>
> + <optional>
> + <attribute name="login" rha:description="Login Name" />
> + </optional>
> + <optional>
> + <attribute name="passwd" rha:description="Login password or passphrase" />
> + </optional>
> + <optional>
> + <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> + </optional>
> + <optional>
> <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" />
> + <attribute name="switch" rha:description="Physical switch number on device" />
> + </optional>
> + <optional>
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> </optional>
> <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> @@ -2698,7 +2770,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -2707,15 +2779,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
>
> - <group rha:fence_agent="fence_lpar">
> + <!-- fence_apc_snmp -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -2735,31 +2808,37 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="secure" rha:description="SSH connection" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> - <attribute name="identity_file" rha:description="Identity file for ssh" />
> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
> </optional>
> <optional>
> - <attribute name="partition" rha:description="Partition name" />
> + <attribute name="community" rha:description="Set the community string" />
> </optional>
> <optional>
> - <attribute name="managed" rha:description="Managed system name" />
> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
> </optional>
> <optional>
> - <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" />
> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
> </optional>
> <optional>
> - <attribute name="cmd_prompt" rha:description="Force command prompt" />
> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
> </optional>
> <optional>
> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
> </optional>
> <optional>
> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
> </optional>
> <optional>
> - <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
> + </optional>
> + <optional>
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> @@ -2780,7 +2859,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -2789,15 +2868,17 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_baytech -->
>
> - <group rha:fence_agent="fence_bladecenter">
> + <!-- fence_bladecenter -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -2856,7 +2937,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -2868,15 +2949,18 @@ To validate your cluster.conf against this schema, run:
> <attribute name="missing_as_off" rha:description="Missing port returns OFF instead of failure" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_brocade -->
> + <!-- No metadata for fence_bullpap -->
>
> - <group rha:fence_agent="fence_intelmodular">
> + <!-- fence_cisco_mds -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -2947,7 +3031,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -2956,15 +3040,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
>
> - <group rha:fence_agent="fence_ifmib">
> + <!-- fence_cisco_ucs -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -2984,31 +3069,89 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> + <attribute name="ssl" rha:description="SSL connection" />
> + </optional>
> + <optional>
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + </optional>
> + <optional>
> <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
> + <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> - <attribute name="community" rha:description="Set the community string" />
> + <attribute name="debug" rha:description="Write debug information to given file" />
> </optional>
> <optional>
> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
> + <attribute name="version" rha:description="Display version information and exit" />
> </optional>
> <optional>
> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
> + <attribute name="help" rha:description="Display help and exit" />
> </optional>
> <optional>
> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
> + <attribute name="separator" rha:description="Separator for CSV created by operation list" />
> </optional>
> <optional>
> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> + </optional>
> + <optional>
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + </optional>
> + <optional>
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + </optional>
> + </group>
> +
> + <!-- No metadata for fence_cpint -->
> + <!-- No metadata for fence_drac -->
> +
> + <!-- fence_drac5 -->
> + <group>
> + <optional>
> + <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> + </optional>
> + <optional>
> + <attribute name="action" rha:description="Fencing Action" />
> + </optional>
> + <optional>
> + <attribute name="ipaddr" rha:description="IP Address or Hostname" />
> + </optional>
> + <optional>
> + <attribute name="login" rha:description="Login Name" />
> + </optional>
> + <optional>
> + <attribute name="passwd" rha:description="Login password or passphrase" />
> + </optional>
> + <optional>
> + <attribute name="passwd_script" rha:description="Script to retrieve password" />
> + </optional>
> + <optional>
> + <attribute name="cmd_prompt" rha:description="Force command prompt" />
> + </optional>
> + <optional>
> + <attribute name="secure" rha:description="SSH connection" />
> + </optional>
> + <optional>
> + <attribute name="identity_file" rha:description="Identity file for ssh" />
> + </optional>
> + <optional>
> + <attribute name="drac_version" rha:description="Force DRAC version to use" />
> + </optional>
> + <optional>
> + <attribute name="module_name" rha:description="DRAC/MC module name" />
> </optional>
> <optional>
> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> @@ -3017,6 +3160,9 @@ To validate your cluster.conf against this schema, run:
> <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + </optional>
> + <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> @@ -3035,7 +3181,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3044,15 +3190,17 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_egenera -->
>
> - <group rha:fence_agent="fence_eps">
> + <!-- fence_eps -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3075,6 +3223,9 @@ To validate your cluster.conf against this schema, run:
> <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> + <attribute name="hidden_page" rha:description="Name of hidden page" />
> + </optional>
> + <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> @@ -3090,15 +3241,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="separator" rha:description="Separator for CSV created by operation list" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
>
> - <group rha:fence_agent="fence_ldom">
> + <!-- fence_ibmblade -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3118,25 +3270,37 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="secure" rha:description="SSH connection" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> - <attribute name="identity_file" rha:description="Identity file for ssh" />
> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
> </optional>
> <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> + <attribute name="community" rha:description="Set the community string" />
> </optional>
> <optional>
> - <attribute name="cmd_prompt" rha:description="Force command prompt" />
> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
> </optional>
> <optional>
> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
> </optional>
> <optional>
> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
> </optional>
> <optional>
> - <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
> + </optional>
> + <optional>
> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
> + </optional>
> + <optional>
> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
> + </optional>
> + <optional>
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> @@ -3157,7 +3321,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3166,18 +3330,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_xcat -->
> - <!-- No metadata for fence_rackswitch -->
> - <!-- No metadata for fence_rsb -->
>
> - <group rha:fence_agent="fence_bladecenter_snmp">
> + <!-- fence_ifmib -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3248,7 +3410,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3257,18 +3419,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_cpint -->
> - <!-- No metadata for fence_drac -->
> - <!-- No metadata for fence_ipmilan -->
>
> - <group rha:fence_agent="fence_rsa">
> + <!-- fence_ilo -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3288,13 +3448,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="cmd_prompt" rha:description="Force command prompt" />
> + <attribute name="ssl" rha:description="SSL connection" />
> </optional>
> <optional>
> - <attribute name="secure" rha:description="SSH connection" />
> + <attribute name="ribcl" rha:description="Force ribcl version to use" />
> </optional>
> <optional>
> - <attribute name="identity_file" rha:description="Identity file for ssh" />
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> @@ -3315,7 +3478,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3324,15 +3487,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
>
> - <group rha:fence_agent="fence_virsh">
> + <!-- fence_ilo_mp -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3358,16 +3522,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> + <attribute name="cmd_prompt" rha:description="Force command prompt" />
> </optional>
> <optional>
> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> </optional>
> <optional>
> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> </optional>
> <optional>
> - <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> @@ -3388,7 +3552,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3397,17 +3561,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_mcdata -->
> - <!-- No metadata for fence_bullpap -->
>
> - <group rha:fence_agent="fence_wti">
> + <!-- fence_intelmodular -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3427,25 +3590,37 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="cmd_prompt" rha:description="Force command prompt" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> - <attribute name="secure" rha:description="SSH connection" />
> + <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
> </optional>
> <optional>
> - <attribute name="identity_file" rha:description="Identity file for ssh" />
> + <attribute name="community" rha:description="Set the community string" />
> </optional>
> <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> + <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
> </optional>
> <optional>
> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
> </optional>
> <optional>
> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
> </optional>
> <optional>
> - <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
> + </optional>
> + <optional>
> + <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
> + </optional>
> + <optional>
> + <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
> + </optional>
> + <optional>
> + <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + </optional>
> + <optional>
> + <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> @@ -3466,7 +3641,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3475,16 +3650,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_zvm -->
>
> - <group rha:fence_agent="fence_drac5">
> + <!-- fence_ldom -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3504,19 +3679,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="cmd_prompt" rha:description="Force command prompt" />
> - </optional>
> - <optional>
> <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="drac_version" rha:description="Force DRAC version to use" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> - <attribute name="module_name" rha:description="DRAC/MC module name" />
> + <attribute name="cmd_prompt" rha:description="Force command prompt" />
> </optional>
> <optional>
> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> @@ -3546,7 +3718,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3555,43 +3727,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> - </optional>
> - <optional>
> <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> - </group>
> -
> - <!-- No metadata for fence_vixel -->
> - <!-- No metadata for fence_baytech -->
> -
> - <group rha:fence_agent="fence_scsi">
> - <optional>
> - <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> - </optional>
> - <optional>
> - <attribute name="aptpl" rha:description="Use APTPL flag for registrations" />
> - </optional>
> - <optional>
> - <attribute name="devices" rha:description="List of devices to be used for fencing action" />
> - </optional>
> - <optional>
> - <attribute name="logfile" rha:description="File to write error/debug messages" />
> - </optional>
> - <optional>
> - <attribute name="key" rha:description="Key value to be used for fencing action" />
> - </optional>
> - <optional>
> - <attribute name="action" rha:description="Fencing action" />
> - </optional>
> <optional>
> - <attribute name="nodename" rha:description="Name of node" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_brocade -->
>
> - <group rha:fence_agent="fence_ilo_mp">
> + <!-- fence_lpar -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3617,10 +3762,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="cmd_prompt" rha:description="Force command prompt" />
> + <attribute name="partition" rha:description="Partition name" />
> </optional>
> <optional>
> - <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + <attribute name="managed" rha:description="Managed system name" />
> + </optional>
> + <optional>
> + <attribute name="hmc_version" rha:description="Force HMC version to use (3 or 4)" />
> + </optional>
> + <optional>
> + <attribute name="cmd_prompt" rha:description="Force command prompt" />
> </optional>
> <optional>
> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> @@ -3629,6 +3780,9 @@ To validate your cluster.conf against this schema, run:
> <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + </optional>
> + <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> @@ -3647,7 +3801,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3656,15 +3810,19 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_ack_manual -->
> + <!-- No metadata for fence_mcdata -->
> + <!-- No metadata for fence_rackswitch -->
>
> - <group rha:fence_agent="fence_apc">
> + <!-- fence_rhevm -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3684,16 +3842,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="secure" rha:description="SSH connection" />
> - </optional>
> - <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> - </optional>
> - <optional>
> - <attribute name="identity_file" rha:description="Identity file for ssh" />
> - </optional>
> - <optional>
> - <attribute name="switch" rha:description="Physical switch number on device" />
> + <attribute name="ssl" rha:description="SSL connection" />
> </optional>
> <optional>
> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> @@ -3705,6 +3854,9 @@ To validate your cluster.conf against this schema, run:
> <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> </optional>
> <optional>
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> + </optional>
> + <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> @@ -3720,27 +3872,25 @@ To validate your cluster.conf against this schema, run:
> <attribute name="separator" rha:description="Separator for CSV created by operation list" />
> </optional>
> <optional>
> - <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> + <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> - <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> - <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> - </optional>
> </group>
>
>
> - <group rha:fence_agent="fence_alom">
> + <!-- fence_rsa -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3760,16 +3910,13 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="secure" rha:description="SSH connection" />
> - </optional>
> - <optional>
> - <attribute name="identity_file" rha:description="Identity file for ssh" />
> + <attribute name="cmd_prompt" rha:description="Force command prompt" />
> </optional>
> <optional>
> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> @@ -3790,7 +3937,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3799,16 +3946,17 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_ibmblade -->
> + <!-- No metadata for fence_rsb -->
>
> - <group rha:fence_agent="fence_sanbox2">
> + <!-- fence_sanbox2 -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3855,7 +4003,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3864,16 +4012,17 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> - <!-- No metadata for fence_egenera -->
> + <!-- No metadata for fence_scsi -->
>
> - <group rha:fence_agent="fence_apc_snmp">
> + <!-- fence_virsh -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3893,31 +4042,13 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> - </optional>
> - <optional>
> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
> - </optional>
> - <optional>
> - <attribute name="community" rha:description="Set the community string" />
> - </optional>
> - <optional>
> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
> - </optional>
> - <optional>
> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
> - </optional>
> - <optional>
> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
> - </optional>
> - <optional>
> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
> + <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
> + <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> @@ -3926,6 +4057,9 @@ To validate your cluster.conf against this schema, run:
> <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + </optional>
> + <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> @@ -3944,7 +4078,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -3953,15 +4087,17 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_vixel -->
>
> - <group rha:fence_agent="fence_ilo">
> + <!-- fence_vmware -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -3981,19 +4117,22 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="ssl" rha:description="SSL connection" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> - <attribute name="ribcl" rha:description="Force ribcl version to use" />
> + <attribute name="exec" rha:description="Command to execute" />
> </optional>
> <optional>
> - <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> + <attribute name="vmware_type" rha:description="Type of VMware to connect" />
> </optional>
> <optional>
> - <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> + <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> - <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + <attribute name="identity_file" rha:description="Identity file for ssh" />
> + </optional>
> + <optional>
> + <attribute name="vmware_datacenter" rha:description="Show only machines in specified datacenter" />
> </optional>
> <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> @@ -4008,10 +4147,13 @@ To validate your cluster.conf against this schema, run:
> <attribute name="help" rha:description="Display help and exit" />
> </optional>
> <optional>
> + <attribute name="separator" rha:description="Separator for CSV created by operation list" />
> + </optional>
> + <optional>
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -4020,15 +4162,17 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_vmware_helper -->
>
> - <group rha:fence_agent="fence_cisco_mds">
> + <!-- fence_wti -->
> + <group>
> <optional>
> <attribute name="option"/> <!-- deprecated; for compatibility. use "action" -->
> </optional>
> @@ -4048,31 +4192,16 @@ To validate your cluster.conf against this schema, run:
> <attribute name="passwd_script" rha:description="Script to retrieve password" />
> </optional>
> <optional>
> - <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> - </optional>
> - <optional>
> - <attribute name="snmp_version" rha:description="Specifies SNMP version to use (1,2c,3)" />
> - </optional>
> - <optional>
> - <attribute name="community" rha:description="Set the community string" />
> - </optional>
> - <optional>
> - <attribute name="snmp_auth_prot" rha:description="Set authentication protocol (MD5|SHA)" />
> - </optional>
> - <optional>
> - <attribute name="snmp_sec_level" rha:description="Set security level (noAuthNoPriv|authNoPriv|authPriv)" />
> - </optional>
> - <optional>
> - <attribute name="snmp_priv_prot" rha:description="Set privacy protocol (DES|AES)" />
> + <attribute name="cmd_prompt" rha:description="Force command prompt" />
> </optional>
> <optional>
> - <attribute name="snmp_priv_passwd" rha:description="Set privacy protocol password" />
> + <attribute name="secure" rha:description="SSH connection" />
> </optional>
> <optional>
> - <attribute name="snmp_priv_passwd_script" rha:description="Script to run to retrieve privacy password" />
> + <attribute name="identity_file" rha:description="Identity file for ssh" />
> </optional>
> <optional>
> - <attribute name="udpport" rha:description="UDP/TCP port to use for connection with device" />
> + <attribute name="port" rha:description="Physical plug number or name of virtual machine" />
> </optional>
> <optional>
> <attribute name="inet4_only" rha:description="Forces agent to use IPv4 addresses only" />
> @@ -4081,6 +4210,9 @@ To validate your cluster.conf against this schema, run:
> <attribute name="inet6_only" rha:description="Forces agent to use IPv6 addresses only" />
> </optional>
> <optional>
> + <attribute name="ipport" rha:description="TCP port to use for connection with device" />
> + </optional>
> + <optional>
> <attribute name="verbose" rha:description="Verbose mode" />
> </optional>
> <optional>
> @@ -4099,7 +4231,7 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_timeout" rha:description="Test X seconds for status change after ON/OFF" />
> </optional>
> <optional>
> - <attribute name="shell_timeout" rha:description="Wait X seconds for cmd promprt after issuing command" />
> + <attribute name="shell_timeout" rha:description="Wait X seconds for cmd prompt after issuing command" />
> </optional>
> <optional>
> <attribute name="login_timeout" rha:description="Wait X seconds for cmd prompt after login" />
> @@ -4108,13 +4240,15 @@ To validate your cluster.conf against this schema, run:
> <attribute name="power_wait" rha:description="Wait X seconds after issuing ON/OFF" />
> </optional>
> <optional>
> - <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> + <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> </optional>
> <optional>
> - <attribute name="delay" rha:description="Wait X seconds before fencing is started" />
> + <attribute name="retry_on" rha:description="Count of attempts to retry power on" />
> </optional>
> </group>
>
> + <!-- No metadata for fence_xcat -->
> + <!-- No metadata for fence_zvm -->
> <!-- end auto-generated device definitions -->
>
> <group>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-12-16 19:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-16 15:24 [Cluster-devel] [PATCH] STABLE31 config: Update fence-agents section from fence-agents.git Lon Hohberger
2010-12-16 19:30 ` Fabio M. Di Nitto
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.