From: Denis Kenzior <denkenz@gmail.com>
To: ofono@ofono.org
Subject: Re: [PATCH 1/2] modem: add Lockdown property to Modem interface
Date: Fri, 17 Dec 2010 18:57:45 -0600 [thread overview]
Message-ID: <4D0C0709.9050305@gmail.com> (raw)
In-Reply-To: <1291413590-22873-1-git-send-email-padovan@profusion.mobi>
[-- Attachment #1: Type: text/plain, Size: 7276 bytes --]
Hi Gustavo,
On 12/03/2010 03:59 PM, Gustavo F. Padovan wrote:
> Setting Lockdown to TRUE means power down the modem and hold a lock that
> only permits the lock's owner power up the modem back. When released
> it restores the last state of the modem before holding the lock.
> ---
> doc/modem-api.txt | 9 ++++
> src/modem.c | 129 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 138 insertions(+), 0 deletions(-)
Can you break this up into two patches, one for doc and one for src?
>
> diff --git a/doc/modem-api.txt b/doc/modem-api.txt
> index b92e53c..45043b0 100644
> --- a/doc/modem-api.txt
> +++ b/doc/modem-api.txt
> @@ -37,6 +37,15 @@ Properties boolean Powered [readwrite]
> Boolean representing the rf state of the modem.
> Online is false in flight mode.
>
> + boolean Lockdown [readwrite]
> +
> + Boolean representing the lock state of the modem.
> + Setting it to true, makes the calling application hold
> + the modem lock and power it down. Setting to false
> + makes the it release the modem lock. Only the
> + application that holds the lock can power up the modem.
> + If the the application exits Lockdown is set to false.
> +
> boolean Emergency [readonly, optional, experimental]
>
> Boolean representing the emergency mode of the
> diff --git a/src/modem.c b/src/modem.c
> index b334b58..a9a6e87 100644
> --- a/src/modem.c
> +++ b/src/modem.c
> @@ -71,6 +71,9 @@ struct ofono_modem {
> ofono_bool_t powered;
> ofono_bool_t powered_pending;
> ofono_bool_t get_online;
> + ofono_bool_t lockdown;
> + char *lock_owner;
> + guint lock_watch;
> guint timeout;
> ofono_bool_t online;
> struct ofono_watchlist *online_watches;
> @@ -583,6 +586,9 @@ void __ofono_modem_append_properties(struct ofono_modem *modem,
> ofono_dbus_dict_append(dict, "Powered", DBUS_TYPE_BOOLEAN,
> &modem->powered);
>
> + ofono_dbus_dict_append(dict, "Lockdown", DBUS_TYPE_BOOLEAN,
> + &modem->lockdown);
> +
> devinfo_atom = __ofono_modem_find_atom(modem, OFONO_ATOM_TYPE_DEVINFO);
>
> /* We cheat a little here and don't check the registered status */
> @@ -686,6 +692,16 @@ static int set_powered(struct ofono_modem *modem, ofono_bool_t powered)
> return err;
> }
>
> +static void lockdown_remove(struct ofono_modem *modem)
> +{
> + DBusConnection *conn =ofono_dbus_get_connection();
> +
> + g_free(modem->lock_owner);
> + g_dbus_remove_watch(conn, modem->lock_watch);
> + modem->lock_watch = 0;
> + modem->lockdown = FALSE;
> +}
> +
> static gboolean set_powered_timeout(gpointer user)
> {
> struct ofono_modem *modem = user;
> @@ -712,11 +728,107 @@ static gboolean set_powered_timeout(gpointer user)
>
> reply = __ofono_error_timed_out(modem->pending);
> __ofono_dbus_pending_reply(&modem->pending, reply);
> +
> + if (modem->lockdown)
> + lockdown_remove(modem);
> }
>
> return FALSE;
> }
>
> +static void lockdown_disconnect(DBusConnection *conn, void *user_data)
> +{
> + struct ofono_modem *modem = user_data;
> +
> + DBG("");
> +
> + g_free(modem->lock_owner);
> +
> + modem->lockdown = FALSE;
> +
> + ofono_dbus_signal_property_changed(conn, modem->path,
> + OFONO_MODEM_INTERFACE,
> + "Lockdown", DBUS_TYPE_BOOLEAN,
> + &modem->lockdown);
Should you also be removing the lock_watch here? Since the lock_watch
is no longer relevant and you'll be leaking it otherwise.
> +}
> +
> +static DBusMessage *set_property_lockdown(struct ofono_modem *modem,
> + DBusMessage *msg,
> + DBusMessageIter *var)
> +{
> + DBusConnection *conn = ofono_dbus_get_connection();
> + ofono_bool_t lockdown;
> + const char *caller;
> + int err;
> +
> + if (dbus_message_iter_get_arg_type(var) != DBUS_TYPE_BOOLEAN)
> + return __ofono_error_invalid_args(msg);
> +
> + dbus_message_iter_get_basic(var, &lockdown);
> +
> + if (modem->pending != NULL)
> + return __ofono_error_busy(msg);
> +
> + if (modem->lockdown == lockdown)
> + return dbus_message_new_method_return(msg);
> +
> + caller = dbus_message_get_sender(msg);
> +
> + if (lockdown) {
> + dbus_bool_t powered;
> +
> + modem->lock_owner = g_strdup(caller);
> +
> + modem->lock_watch = g_dbus_add_service_watch(conn,
> + modem->lock_owner, NULL,
> + lockdown_disconnect, modem, NULL);
> +
> + if (modem->lock_watch == 0) {
> + g_free(modem->lock_owner);
> + return __ofono_error_failed(msg);
> + }
> +
> + modem->lockdown = lockdown;
> +
> + if (!modem->powered)
> + goto done;
> +
> + err = set_powered(modem, FALSE);
> + if (err < 0) {
> + if (err != -EINPROGRESS) {
> + lockdown_remove(modem);
> + return __ofono_error_failed(msg);
> + }
> +
> + modem->pending = dbus_message_ref(msg);
> + modem->timeout = g_timeout_add_seconds(20,
> + set_powered_timeout, modem);
> + return NULL;
> + }
> +
> + powered = FALSE;
> + ofono_dbus_signal_property_changed(conn, modem->path,
> + OFONO_MODEM_INTERFACE,
> + "Powered", DBUS_TYPE_BOOLEAN,
> + &powered);
> + } else {
> + if (g_strcmp0(caller, modem->lock_owner))
> + return __ofono_error_access_denied(msg);
> +
> + lockdown_remove(modem);
> + }
> +
> +done:
> + g_dbus_send_reply(conn, msg, DBUS_TYPE_INVALID);
> +
> + ofono_dbus_signal_property_changed(conn, modem->path,
> + OFONO_MODEM_INTERFACE,
> + "Lockdown", DBUS_TYPE_BOOLEAN,
> + &lockdown);
> +
> + return NULL;
> +}
> +
> static DBusMessage *modem_set_property(DBusConnection *conn,
> DBusMessage *msg, void *data)
> {
> @@ -759,6 +871,9 @@ static DBusMessage *modem_set_property(DBusConnection *conn,
> if (modem->powered == powered)
> return dbus_message_new_method_return(msg);
>
> + if (modem->lockdown)
> + return __ofono_error_access_denied(msg);
> +
> err = set_powered(modem, powered);
> if (err < 0) {
> if (err != -EINPROGRESS)
> @@ -790,6 +905,9 @@ static DBusMessage *modem_set_property(DBusConnection *conn,
> return NULL;
> }
>
> + if (g_str_equal(name, "Lockdown"))
> + return set_property_lockdown(modem, msg, &var);
> +
> return __ofono_error_invalid_args(msg);
> }
>
> @@ -834,6 +952,12 @@ void ofono_modem_set_powered(struct ofono_modem *modem, ofono_bool_t powered)
>
> modem->powered = powered;
>
> + if (modem->lockdown)
> + ofono_dbus_signal_property_changed(conn, modem->path,
> + OFONO_MODEM_INTERFACE,
> + "Lockdown", DBUS_TYPE_BOOLEAN,
> + &modem->lockdown);
> +
> if (modem->driver == NULL) {
> ofono_error("Calling ofono_modem_set_powered on a"
> "modem with no driver is not valid, "
> @@ -1593,6 +1717,11 @@ static void modem_unregister(struct ofono_modem *modem)
> modem->interface_update = 0;
> }
>
> + if (modem->lock_watch) {
> + g_dbus_remove_watch(conn, modem->lock_watch);
> + modem->lock_watch = 0;
> + }
> +
What about signaling the Lockdown to false, and g_freeing the lock_owner?
> g_dbus_unregister_interface(conn, modem->path, OFONO_MODEM_INTERFACE);
>
> if (modem->driver && modem->driver->remove)
Regards,
-Denis
next prev parent reply other threads:[~2010-12-18 0:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-03 21:59 [PATCH 1/2] modem: add Lockdown property to Modem interface Gustavo F. Padovan
2010-12-03 21:59 ` [PATCH 2/2] modem: Add test script for the Lockdown property Gustavo F. Padovan
2010-12-18 0:57 ` Denis Kenzior [this message]
2010-12-22 18:19 ` [PATCH 1/2] modem: add Lockdown property to Modem interface Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D0C0709.9050305@gmail.com \
--to=denkenz@gmail.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.