[PATCH 1/3] ARM: mx3/mx35_3ds: Add USB OTG Host mode

[grinberg@compulab.co.il (Igor Grinberg)]

Hi Fabio,

On 12/21/10 21:58, Fabio Estevam wrote:
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/mach-mx3/Kconfig         |    1 +
>  arch/arm/mach-mx3/mach-mx35_3ds.c |   34 ++++++++++++++++++++++++++++++++--
>  2 files changed, 33 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
> index 9037c4e..f474e2e 100644
> --- a/arch/arm/mach-mx3/Kconfig
> +++ b/arch/arm/mach-mx3/Kconfig
> @@ -185,6 +185,7 @@ config MACH_MX35_3DS
>  	select IMX_HAVE_PLATFORM_MXC_EHCI
>  	select IMX_HAVE_PLATFORM_MXC_NAND
>  	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
> +	select MXC_ULPI if USB_ULPI
>  	help
>  	  Include support for MX35PDK platform. This includes specific
>  	  configurations for the board and its peripherals.
> diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
> index 8bd8992..3cb4f5c 100644
> --- a/arch/arm/mach-mx3/mach-mx35_3ds.c
> +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
> @@ -26,6 +26,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/memory.h>
>  #include <linux/gpio.h>
> +#include <linux/usb/otg.h>
> +#include <linux/usb/ulpi.h>
>  
>  #include <linux/mtd/physmap.h>
>  
> @@ -39,6 +41,7 @@
>  #include <mach/iomux-mx35.h>
>  #include <mach/irqs.h>
>  #include <mach/3ds_debugboard.h>
> +#include <mach/ulpi.h>
>  
>  #include "devices-imx35.h"
>  #include "devices.h"
> @@ -125,12 +128,34 @@ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
>  	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
>  };
>  
> +#if defined(CONFIG_USB_ULPI)
> +static struct mxc_usbh_platform_data otg_pdata __initdata = {
> +	.portsc	= MXC_EHCI_MODE_UTMI,
> +	.flags	= MXC_EHCI_INTERNAL_PHY,
> +};
> +

I don't know much about mx3, but the above looks confusing. A typo?

>  /* USB HOST config */
>  static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
>  	.portsc		= MXC_EHCI_MODE_SERIAL,
>  	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
>  			  MXC_EHCI_INTERNAL_PHY,
>  };
> +#endif
> +
> +static int otg_mode_host;
> +
> +static int __init mx35_3ds_otg_mode(char *options)
> +{
> +	if (!strcmp(options, "host"))
> +		otg_mode_host = 1;
> +	else if (!strcmp(options, "device"))
> +		otg_mode_host = 0;
> +	else
> +		pr_info("otg_mode neither \"host\" nor \"device\". "
> +			"Defaulting to device\n");
> +	return 0;
> +}
> +__setup("otg_mode=", mx35_3ds_otg_mode);
>  
>  /*
>   * Board specific initialization.
> @@ -144,10 +169,15 @@ static void __init mxc_board_init(void)
>  	platform_add_devices(devices, ARRAY_SIZE(devices));
>  
>  	imx35_add_imx_uart0(&uart_pdata);
> -
> -	imx35_add_fsl_usb2_udc(&usb_otg_pdata);
> +
> +#if defined(CONFIG_USB_ULPI)
> +	if (otg_mode_host)
> +		imx35_add_mxc_ehci_otg(&otg_pdata);
>  
>  	imx35_add_mxc_ehci_hs(&usb_host_pdata);
> +#endif
> +	if (!otg_mode_host)
> +		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
>  
>  	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
>  	imx35_add_sdhci_esdhc_imx(0, NULL);

-- 
Regards,
Igor.