From: "Ludovic BOUÉ" <ludovic.boue@gmail.com>
To: linux-media@dinkum.org.uk, linux-media@vger.kernel.org
Cc: o.endriss@gmx.de
Subject: Re: ngene & Satix-S2 dual problems
Date: Sun, 26 Dec 2010 15:40:15 +0100 [thread overview]
Message-ID: <4D1753CF.9010205@gmail.com> (raw)
Hi all,
I have a Satix-S2 Dual and I'm trying to get to work without his CI in a first time. I'm trying ngene-test2
from http://linuxtv.org/hg/~endriss/ngene-test2/ under
2.6.32-21-generic.
It contains too much nodes (extra demuxes, dvrs & nets):
> ubuntu@ubuntu:~/ngene-test2/v4l$ ls -l /dev/dvb/adapter*
> total 0
> crw-rw----+ 1 root video 212, 0 2010-12-26 13:08 demux0
> crw-rw----+ 1 root video 212, 4 2010-12-26 13:08 demux1
> crw-rw----+ 1 root video 212, 8 2010-12-26 13:08 demux2
> crw-rw----+ 1 root video 212, 11 2010-12-26 13:08 demux3
> crw-rw----+ 1 root video 212, 14 2010-12-26 13:08 demux4
> crw-rw----+ 1 root video 212, 1 2010-12-26 13:08 dvr0
> crw-rw----+ 1 root video 212, 5 2010-12-26 13:08 dvr1
> crw-rw----+ 1 root video 212, 9 2010-12-26 13:08 dvr2
> crw-rw----+ 1 root video 212, 12 2010-12-26 13:08 dvr3
> crw-rw----+ 1 root video 212, 15 2010-12-26 13:08 dvr4
> crw-rw----+ 1 root video 212, 3 2010-12-26 13:08 frontend0
> crw-rw----+ 1 root video 212, 7 2010-12-26 13:08 frontend1
> crw-rw----+ 1 root video 212, 2 2010-12-26 13:08 net0
> crw-rw----+ 1 root video 212, 6 2010-12-26 13:08 net1
> crw-rw----+ 1 root video 212, 10 2010-12-26 13:08 net2
> crw-rw----+ 1 root video 212, 13 2010-12-26 13:08 net3
> crw-rw----+ 1 root video 212, 16 2010-12-26 13:08 net4
Is it connected to this commit (http://linuxtv.org/hg/~endriss/ngene-test2/rev/eb4142f0d0ac) about "Support up to 4 tuners for cineS2 v5, duoflex & mystique v2" ?
Here is what dmesg reports I do 'modprobe ngene'
> [ 3248.072496] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
> [ 3248.072533] ngene 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 3248.072548] ngene: Found Mystique SaTiX-S2 Dual (v2)
> [ 3248.075765] ngene 0000:02:00.0: setting latency timer to 64
> [ 3248.075926] ngene: Device version 1
> [ 3248.075938] ngene 0000:02:00.0: firmware: requesting ngene_18.fw
> [ 3248.079319] ngene: Loading firmware file ngene_18.fw.
> [ 3248.090194] alloc irq_desc for 28 on node -1
> [ 3248.090197] alloc kstat_irqs on node -1
> [ 3248.090212] ngene 0000:02:00.0: irq 28 for MSI/MSI-X
> [ 3248.091778] error in i2c_read_reg
> [ 3248.091781] No CXD2099 detected at 40 <---- No dedicated ASIC is a
> Sony CXD2099AR
> [ 3248.091943] DVB: registering new adapter (nGene)
> [ 3248.414997] LNBx2x attached on addr=a
> [ 3248.421091] stv6110x_attach: Attaching STV6110x
> [ 3248.421095] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
> [ 3248.422500] LNBx2x attached on addr=8
> [ 3248.422568] stv6110x_attach: Attaching STV6110x
> [ 3248.422571] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
About the module :
> ubuntu@ubuntu:~/ngene-test2/v4l$ modinfo ngene
> filename:
> /lib/modules/2.6.32-21-generic/kernel/drivers/media/dvb/ngene/ngene.ko
> license: GPL
> author: Micronas, Ralph Metzler, Manfred Voelkel
> description: nGene
> license: GPL
> author: Ralph Metzler <rjkm@metzlerbros.de>
> description: cxd2099
> srcversion: AC815F965A079912E969015
> alias: pci:v000018C3d00000720sv00001461sd0000062Ebc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000DD20bc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000DD10bc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000DD00bc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000DB02bc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000DB01bc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000ABC4bc*sc*i*
> alias: pci:v000018C3d00000720sv000018C3sd0000ABC3bc*sc*i*
> depends: dvb-core
> vermagic: 2.6.32-21-generic SMP mod_unload modversions 586
> parm: one_adapter:Use only one adapter. (int)
> parm: shutdown_workaround:Activate workaround for shutdown
> problem with some chipsets. (int)
> parm: debug:Print debugging information. (int)
> parm: adapter_nr:DVB adapter numbers (array of short)
When I put the option "one_adapter=0" :
> sudo modprobe ngene debug=1 one_adapter=0
> [ 6077.066311] ngene 0000:02:00.0: PCI INT A disabled
> [ 6101.525377] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
> [ 6101.525405] ngene 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 6101.525418] ngene: Found Mystique SaTiX-S2 Dual (v2)
> [ 6101.530520] ngene 0000:02:00.0: setting latency timer to 64
> [ 6101.530683] ngene: Device version 1
> [ 6101.530692] ngene 0000:02:00.0: firmware: requesting ngene_18.fw
> [ 6101.532043] ngene: Loading firmware file ngene_18.fw.
> [ 6101.542919] ngene 0000:02:00.0: irq 28 for MSI/MSI-X
> [ 6101.545199] error in i2c_read_reg
> [ 6101.545206] No CXD2099 detected at 40
> [ 6101.545374] DVB: registering new adapter (nGene)
> [ 6101.844886] LNBx2x attached on addr=a
> [ 6101.845092] stv6110x_attach: Attaching STV6110x
> [ 6101.845101] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
> [ 6101.846175] DVB: registering new adapter (nGene)
> [ 6101.850023] LNBx2x attached on addr=8
> [ 6101.850231] stv6110x_attach: Attaching STV6110x
> [ 6101.850238] DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
> [ 6101.850584] DVB: registering new adapter (nGene) <---- No need to register this
> adapter
> [ 6101.852948] DVB: registering new adapter (nGene) <---- No need to register this
> adapter
> [ 6101.855690] DVB: registering new adapter (nGene) <---- No need to register this
> adapter
You can see that adapter 2, 3 and 4 are registering and the is no need to.
> ubuntu@ubuntu:~/ngene-test2/v4l$ ls -l /dev/dvb/adapter*
> /dev/dvb/adapter0:
> total 0
> crw-rw----+ 1 root video 212, 0 2010-12-26 12:52 demux0
> crw-rw----+ 1 root video 212, 1 2010-12-26 12:52 dvr0
> crw-rw----+ 1 root video 212, 3 2010-12-26 12:52 frontend0
> crw-rw----+ 1 root video 212, 2 2010-12-26 12:52 net0
>
> /dev/dvb/adapter1:
> total 0
> crw-rw----+ 1 root video 212, 4 2010-12-26 12:52 demux0
> crw-rw----+ 1 root video 212, 5 2010-12-26 12:52 dvr0
> crw-rw----+ 1 root video 212, 7 2010-12-26 12:52 frontend0
> crw-rw----+ 1 root video 212, 6 2010-12-26 12:52 net0
>
> /dev/dvb/adapter2:
> total 0
> crw-rw----+ 1 root video 212, 8 2010-12-26 12:52 demux0
> crw-rw----+ 1 root video 212, 9 2010-12-26 12:52 dvr0
> crw-rw----+ 1 root video 212, 10 2010-12-26 12:52 net0
>
> /dev/dvb/adapter3:
> total 0
> crw-rw----+ 1 root video 212, 11 2010-12-26 12:52 demux0
> crw-rw----+ 1 root video 212, 12 2010-12-26 12:52 dvr0
> crw-rw----+ 1 root video 212, 13 2010-12-26 12:52 net0
>
> /dev/dvb/adapter4:
> total 0
> crw-rw----+ 1 root video 212, 14 2010-12-26 12:52 demux0
> crw-rw----+ 1 root video 212, 15 2010-12-26 12:52 dvr0
> crw-rw----+ 1 root video 212, 16 2010-12-26 12:52 net0
Is the no test to check how many andapters are needed with the card ? I
was working with stable driver dans 1.5 firmware.
Ludovic,
--
Ludovic BOUÉ
next reply other threads:[~2010-12-26 14:40 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-26 14:40 Ludovic BOUÉ [this message]
2010-12-27 9:07 ` ngene & Satix-S2 dual problems Andre
[not found] ` <AANLkTik4-U7oEAvDgyKe+ptM1B3Q14h5we0TUXh5txip@mail.gmail.com>
2010-12-27 12:14 ` Andre
[not found] ` <4D19D8A0.6010606@gmail.com>
2010-12-28 17:25 ` Andre
2011-01-11 15:25 ` Andre
2010-12-27 21:49 ` Oliver Endriss
2010-12-28 7:57 ` Oliver Endriss
2010-12-28 8:54 ` Ludovic BOUE
2010-12-28 12:22 ` Ludovic BOUÉ
2010-12-28 15:01 ` Oliver Endriss
2011-01-31 14:46 ` Ludovic BOUÉ
2011-01-31 16:38 ` Oliver Endriss
-- strict thread matches above, loose matches on Subject: below --
2011-01-22 17:04 Robert Longbottom
2010-11-20 15:52 Robert Longbottom
2010-11-20 19:22 ` Oliver Endriss
2010-11-21 9:38 ` Andre
2010-11-21 11:40 ` Andre
2010-11-21 13:07 ` Robert Longbottom
2010-11-21 13:15 ` Andre
2010-11-21 17:23 ` Robert Longbottom
2010-11-21 19:23 ` Andre
2010-11-21 19:48 ` Robert Longbottom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D1753CF.9010205@gmail.com \
--to=ludovic.boue@gmail.com \
--cc=linux-media@dinkum.org.uk \
--cc=linux-media@vger.kernel.org \
--cc=o.endriss@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.