Re: Failing to compile Yocto (acl package)

[Pedro Sanchez <psanchez@fosstel.com>]

On 12/27/2010 08:13 PM, Tian, Kevin wrote:
>> From: Pedro Sanchez
>> Sent: Tuesday, December 28, 2010 8:10 AM
>>
>> On 12/27/2010 05:44 PM, Gary Thomas wrote:
>>> On 12/27/2010 03:21 PM, Pedro Sanchez wrote:
>>>> Hello,
>>>>
>>>> I'm trying to compile Yocto from sources as described in the quick
>>>> start documentation but the build fails as follows:
>>>>
>>>> $ wget
>>>> http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
>>>> $ tar xjf poky-laverne-4.0.tar.bz2
>>>> $ (edited conf/local.conf to select qemuarm)
>>>> $ source poky-laverne-4.0/poky-init-build-env poky-4.0-build
>>>> $ bitbake poky-image-minimal
>>>>
>>>>
>>>> ... (30 minutes of work)
>>>>
>>>> NOTE: package acl-2.2.49-r0: task do_fetch: Succeeded
>>>> NOTE: Running task 582 of 1621 (ID: 1261,
>>>> /home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb,
>>>> do_unpack)
>>>> NOTE: package acl-2.2.49-r0: task do_unpack: Started
>>>> NOTE: Unpacking
>>>> /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to
>>>>
>> /home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49
>> -r0/
>>>>
>>>> ERROR: Task failed:
>>>> NOTE: package acl-2.2.49-r0: task do_unpack: Failed
>>>> ERROR: Task 1261
>>>> (/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb,
>>>> do_unpack) failed with 1
>>>> ERROR:
>>>> '/home/psanchez/Oven/poky-laverne-4.0/meta/recipes-support/attr/acl_2.2.49.bb'
>>>> failed
>>>>
>>>>
>>>> I tried compiling the Laverne branch on a cloned Poky git repo. It
>>>> also fails when processing the acl package. Any workarounds? Is there
>>>> any log file I can look at for more details?
>>>
>>> You can find log files in the build directory with a relative
>>> path like .../tmp/work/*/acl*/temp
>>>
>>> In particular, look at the log.do_unpack file for clues
>>>
>>
>> Thanks,
>>
>> This is what I see:
>>
>> $ cat armv5te-poky-linux-gnueabi/acl-2.2.49-r0/temp/log.do_unpack
>> gzip: stdin: not in gzip format
>> tar: Child returned status 1
>> tar: Exiting with failure status due to previous errors
>> NOTE: Unpacking
>> /home/psanchez/Oven/poky-4.0-build/downloads/acl-2.2.49.src.tar.gz to
>> /home/psanchez/Oven/poky-4.0-build/tmp/work/armv5te-poky-linux-gnueabi/acl-2.2.49
>> -r0/
>> ERROR: Task failed:
>>
>> $ file poky-4.0-build/downloads/acl-2.2.49.src.tar.gz
>> poky-4.0-build/downloads/acl-2.2.49.src.tar.gz: HTML document text
>>
>> The mirror where bb is configured to get acl from, mirror.cinquix.com,
>> is down. I'll try to get it from the Savannah site.
>>
>
> I've sent out the SRC_URI fixes to use correct Savannah site.
>
> BTW, if the mirror site is down, you should still get a correct tar ball from
> pre-configured poky mirrors (pokylinux.org, ...). Please let's know if those
> mirrors don't take effect to you.
>
> Thanks
> Kevin

First of all thank for the quick fix! My laptop is busy building Yocto 
now as I write.

As for the poky mirrors, they clearly didn't work for me. The bitbake 
command just stopped working when it failed to process the acl package. 
As far as I can say no attempts were made to reach any poky mirrors at 
all. Is there something we have to do to enable them before compiling 
the project?

-- 
Pedro