From: Angelo Dureghello <angelo70@gmail.com>
To: Baruch Siach <baruch@tkos.co.il>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: dm9000 patch
Date: Wed, 29 Dec 2010 14:13:22 +0100 [thread overview]
Message-ID: <4D1B33F2.5060600@gmail.com> (raw)
In-Reply-To: <20101229060637.GA31010@jasper.tkos.co.il>
Hi all,
just FYI, i tested kernel 2.6.36.2, unfortunately the issue is still
there, below the call stack trace.
[ 4.620000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 39.390000] BUG: spinlock recursion on CPU#0, httpd/29
[ 39.390000] lock: 00189c44, .magic: dead4ead, .owner: httpd/29,
.owner_cpu: 0
[ 39.390000] Stack from 00d6a990:
[ 39.390000] 00d6a9bc 000a9710 0017cac7 00189c44 dead4ead
00de48f4 0000001d 00000000
[ 39.390000] 00189c44 0002a646 00145f70 00d6a9f0 000a98e2
00189c44 0017cb2d 00189c44
[ 39.390000] 00d6aad8 0000001f 00145f5c 001523f6 00189c08
0002a646 00145f70 0002bc52
[ 39.390000] 00d6a9fc 00145f7e 00189c44 00d6aa28 0002a75e
00189c44 0000001f 00d6aad8
[ 39.390000] 0000001f 00145f5c 00189c08 0002a646 00145f70
0002bc52 00d6aa3c 00000bb6
[ 39.390000] 0000001f 00189c44 00cfc780 00d6aa84 0000337a
0000001f 00d6aa4c 00000001
[ 39.390000] Call Trace:
[ 39.390000] [000a9710] spin_bug+0x86/0x11a
[ 39.390000] [000a98e2] do_raw_spin_lock+0x58/0x120
[ 39.390000] [00145f7e] _raw_spin_lock+0xe/0x14
[ 39.390000] [0002a75e] __do_IRQ+0x2c/0x108
[ 39.390000] [00000bb6] do_IRQ+0x48/0x62
[ 39.390000] [0000337a] inthandler+0x6a/0x74
[ 39.390000] [0002a82e] __do_IRQ+0xfc/0x108
[ 39.390000] [00000bb6] do_IRQ+0x48/0x62
[ 39.390000] [0000337a] inthandler+0x6a/0x74
[ 39.390000] [000ef0ce] skb_release_all+0x10/0x20
[ 39.390000] [000ee6bc] __kfree_skb+0x10/0x92
[ 39.390000] [000ee75e] consume_skb+0x20/0x34
[ 39.390000] [000e004e] dm9000_start_xmit+0xdc/0xec
[ 39.390000] [000f67a2] dev_hard_start_xmit+0x146/0x472
[ 39.390000] [00106506] sch_direct_xmit+0xc0/0x1bc
[ 39.390000] [000f9914] dev_queue_xmit+0x160/0x3e4
[ 39.390000] [00113b3e] ip_finish_output+0xee/0x318
[ 39.390000] [001142b4] ip_output+0x7c/0x88
[ 39.390000] [00113dc6] ip_local_out+0x26/0x30
[ 39.390000] [00114d9a] ip_queue_xmit+0x152/0x374
[ 39.390000] [00125c8c] tcp_transmit_skb+0x3f0/0x732
[ 39.390000] [00126f26] tcp_write_xmit+0x178/0x868
[ 39.390000] [00127644] __tcp_push_pending_frames+0x2e/0x9a
[ 39.390000] [0011c3d6] tcp_sendmsg+0x82e/0x98c
[ 39.390000] [00137544] inet_sendmsg+0x32/0x54
[ 39.390000] [000e79a6] sock_aio_write+0xc8/0x138
[ 39.390000] [00042590] do_sync_write+0x9e/0xfe
[ 39.390000] [00042668] vfs_write+0x78/0x84
[ 39.390000] [00042a92] sys_write+0x40/0x7a
[ 39.390000] [00003224] system_call+0x84/0xc2
[ 39.390000]
dm9000e is as default not visible/selectable in menuconfig for Coldfire
architectures, so this probably cannot be considered as a kernel bug.
I going forward in investigations, every help is appreciated,
regards,
angelo
On 29/12/2010 07:06, Baruch Siach wrote:
> Hi Angelo,
>
> On Tue, Dec 28, 2010 at 10:52:42PM +0100, Angelo Dureghello wrote:
>
>> sorry to contact you directly but i couldn't get any help from the
>> kernel.org mailing list, since i am not a developer my mails are
>> generally skipped.
>>
> The best way to get the contact info for a piece of kernel code, is using the
> get_maintainer.pl script. Running 'scripts/get_maintainer.pl -f
> drivers/net/dm9000.c' gives the following output:
>
> netdev@vger.kernel.org
> linux-kernel@vger.kernel.org
>
> I added both to Cc.
>
>
>> I am very near to have a custom board working with MCF5307 cpu and dm9000.
>> I am using kernel 2.6.36-rc3 with your last patch about
>> spinlock-recursion already included.
>>
> You should try to update to the latest .36 kernel, which is currently
> 2.6.36.2. The problem that you experience might be unrelated to the dm9000
> driver (or to networking at all), so it might have been fixed in this version.
>
>
>> I have "ping" and "telnet" to the embedded board fully working.
>> If i try to get a sample web page with some images from the board
>> httpd with a browser, in 80% of cases i get a trap/oops:
>>
> Try to enable KALLSYMS in your kernel .config to make your stack trace more
> meaningful. This is under 'General setup -> Configure standard kernel features
> (for small systems) -> Load all symbols for debugging/ksymoops'.
>
> I hope this helps.
>
> baruch
>
>
>> [ 4.590000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> [ 67.630000] BUG: spinlock recursion on CPU#0, httpd/29
>> [ 67.630000] lock: 00c42c06, .magic: dead4ead, .owner: httpd/29,
>> .owner_cpu: 0
>> [ 67.630000] Stack from 00d7b914:
>> [ 67.630000] 00d7b940 000a8cf0 0015f693 00c42c06 dead4ead
>> 00dec1d4 0000001d 00000000
>> [ 67.630000] 00c42c06 00006188 00c42800 00d7b974 000a8ec2
>> 00c42c06 0015f6f9 00002704
>> [ 67.630000] 00000000 0000001f 00146fa4 00152f0c 00c42b60
>> 00006188 00c42800 0002b312
>> [ 67.630000] 00d7b984 0014701e 00c42c06 00000000 00d7b9c4
>> 000df21c 00c42c06 00000000
>> [ 67.630000] 00000000 0000001f 00146fa4 00152f0c 000005ea
>> 00cfc640 00006188 000096e8
>> [ 67.630000] 0002b312 00146fa4 00c42b60 00002704 00d7b9ec
>> 00029d3a 0000001f 00c42800
>> [ 67.630000] Call Trace:
>> [ 67.630000] [000a8cf0] [000a8ec2] [0014701e] [000df21c] [00029d3a]
>> [ 67.630000] [00029e84] [00000bb6] [0000336e] [000df162] [000effd6]
>> [ 67.630000] [00100482] [000f312e] [000f9ebc] [0010dd2a] [0010e4a0]
>> [ 67.630000] [0010dfb2] [0010ef80] [0011fed6] [00121170] [0012188e]
>> [ 67.630000] [0011ecc6] [001249fe] [000e4084] [0011621c] [00131a44]
>> [ 67.630000] [000e11ee] [00041944] [00041a1c] [00041e46] [00003218]
>> [ 67.630000] BUG: spinlock lockup on CPU#0, httpd/29, 00c42c06
>> [ 67.630000] Stack from 00d7b934:
>> [ 67.630000] 00d7b974 000a8f66 0015f703 00000000 00dec1d4
>> 0000001d 00c42c06 00002704
>> [ 67.630000] 00000000 0000001f 00146fa4 00152f0c 00c42b60
>> 00006188 00c42800 0002b312
>> [ 67.630000] 00d7b984 0014701e 00c42c06 00000000 00d7b9c4
>> 000df21c 00c42c06 00000000
>> [ 67.630000] 00000000 0000001f 00146fa4 00152f0c 000005ea
>> 00cfc640 00006188 000096e8
>> [ 67.630000] 0002b312 00146fa4 00c42b60 00002704 00d7b9ec
>> 00029d3a 0000001f 00c42800
>> [ 67.630000] 0016c1b4 00cfc640 0000001f 0016c178 00029d10
>> 00146fb8 00d7ba20 00029e84
>> [ 67.630000] Call Trace:
>> [ 67.630000] [000a8f66] [0014701e] [000df21c] [00029d3a] [00029e84]
>> [ 67.630000] [00000bb6] [0000336e] [000df162] [000effd6] [00100482]
>> [ 67.630000] [000f312e] [000f9ebc] [0010dd2a] [0010e4a0] [0010dfb2]
>> [ 67.630000] [0010ef80] [0011fed6] [00121170] [0012188e] [0011ecc6]
>> [ 67.630000] [001249fe] [000e4084] [0011621c] [00131a44] [000e11ee]
>> [ 67.630000] [00041944] [00041a1c] [00041e46] [00003218]
>>
>> As i said, i was hoping in your patch but i sadly discovered it is
>> already included in this kernel version.
>> Hope you can give me some help or can forward me to an appropriate
>> mailing list.
>>
>
next prev parent reply other threads:[~2010-12-29 13:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4D1A5C2A.5050606@gmail.com>
2010-12-29 6:06 ` dm9000 patch Baruch Siach
2010-12-29 8:48 ` Angelo Dureghello
2010-12-29 13:13 ` Angelo Dureghello [this message]
2010-12-29 18:06 ` Baruch Siach
2010-12-29 18:45 ` Geert Uytterhoeven
2010-12-29 20:57 ` Angelo Dureghello
2010-12-29 21:16 ` Joe Perches
2010-12-30 0:37 ` Greg Ungerer
2010-12-30 0:37 ` [uClinux-dev] " Greg Ungerer
2010-12-30 9:53 ` Angelo Dureghello
2010-12-30 9:59 ` Angelo Dureghello
2010-12-30 9:59 ` [uClinux-dev] " Angelo Dureghello
2010-12-30 11:17 ` Greg Ungerer
2010-12-30 11:17 ` [uClinux-dev] " Greg Ungerer
2010-12-30 15:05 ` Angelo Dureghello
2010-12-30 15:12 ` Baruch Siach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D1B33F2.5060600@gmail.com \
--to=angelo70@gmail.com \
--cc=baruch@tkos.co.il \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.