Re: [PATCH net-next-2.6 v3 1/1] can: c_can: Added support for Bosch C_CAN controller

[Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>]

Hello,

On 01/11/2011 09:29 AM, Wolfgang Grandegger wrote:
> Hi Bhupesh,
> 
> On 01/11/2011 05:50 AM, Bhupesh SHARMA wrote:
>> Hi Wolfgang,
>>
>> Thanks for your review.
>> Please see my comments inline.
>>
>>> -----Original Message-----
>>> From: Wolfgang Grandegger [mailto:wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org]
> ...
> 
>>>> + * Bosch C_CAN controller is compliant to CAN protocol version 2.0
>>> part A and B.
>>>> + * Bosch C_CAN user manual can be obtained from:
>>>> + * http://www.semiconductors.bosch.de/pdf/Users_Manual_C_CAN.pdf
>>>
>>> Unfortunately, this link is not valid any more.
>>
>> Oops..
>> It seems they have shifted to:
>> http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf
> 
> Ah, nice. I was not aware of that new link.

I was told that Bosch's page for the C_CAN is here:

 http://www.semiconductors.bosch.de/en/ipmodules/can/canipmodules/c_can/c_can.asp

There it's also written for what bus interfaces the C_CAN is available for, e.g.:

  "The ASIC version is delivered with the AMBA APB bus interface from ARM."

which is obviously used in the "Platform Controller Hub" eg20t.

Wolfgang.
> 
> ...
>>>> +int c_can_write_msg_object(struct net_device *dev,
>>>> +                   int iface, struct can_frame *frame, int objno)
>>>> +{
>>>> +   int i;
>>>> +   u16 flags = 0;
>>>> +   unsigned int id;
>>>> +   struct c_can_priv *priv = netdev_priv(dev);
>>>> +
>>>> +   if (frame->can_id & CAN_EFF_FLAG) {
>>>> +           id = frame->can_id & CAN_EFF_MASK;
>>>> +           flags |= IF_ARB_MSGXTD;
>>>> +   } else
>>>> +           id = ((frame->can_id & CAN_SFF_MASK) << 18);
> 
> I just realize that the  {} for the else block is missing.
> 
>>>> +   /*
>>>> +    * check for 'last error code' which tells us the
>>>> +    * type of the last error to occur on the CAN bus
>>>> +    */
>>>> +   switch (lec_type) {
>>>> +           /* common for all type of bus errors */
>>>> +           priv->can.can_stats.bus_error++;
>>>> +           stats->rx_errors++;
>>>> +           cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
>>>> +           cf->data[2] |= CAN_ERR_PROT_UNSPEC;
>>>
>>> Are you sure that this part is ever executed? I wonder why the compile
>>> does
>>> not complain.
>>
>> I did not get any compilation error.
> 
> I know.
> 
>> But I will check if the program flow enters this part or not.
> 
> Good. It was *not* executed in my little user space test program.
> 
> ...
>>>> +static int __devexit c_can_plat_remove(struct platform_device *pdev)
>>>> +{
>>>> +   struct net_device *dev = platform_get_drvdata(pdev);
>>>> +   struct c_can_priv *priv = netdev_priv(dev);
>>>> +   struct resource *mem;
>>>> +
>>>> +   /* disable all interrupts */
>>>> +   c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS);
>>>
>>> To avoid exportign that function, couldn't it be done at the beginning
>>> of
>>> unregister_c_can_dev()?
>>
>> Yes this can be done.
>> But, IMHO *disabling* interrupts seems more logical as part of __devexit
>> Code.
> 
> I think the interrupts are already disabled when you unload the module
> because the device must be closed (c_can_stop has been called). Anyway,
> I think the above c_can_enable_all_interrupts() call is well placed in
> the unregister function. I would avoid the export the function.
> 
> Wolfgang.
> _______________________________________________
> Socketcan-core mailing list
> Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
> https://lists.berlios.de/mailman/listinfo/socketcan-core
> 
>