From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stephen Clark <sclark46@earthlink.net>
Subject: Re: panic in tg3 driver
Date: Sun, 16 Jan 2011 13:11:50 -0500
Message-ID: <4D3334E6.40100@earthlink.net>
References: <4D2334B5.1060408@earthlink.net> <4D2A371A.40103@earthlink.net> <20110110192216.GA23741@mcarlson.broadcom.com> <4D2B6652.7040607@earthlink.net> <20110111020055.GA25351@mcarlson.broadcom.com> <4D2C64EF.1080905@earthlink.net> <20110112030652.GA27164@mcarlson.broadcom.com> <4D2EFA44.8080008@earthlink.net>
Reply-To: sclark46@earthlink.net
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Cc: Matt Carlson <mcarlson@broadcom.com>,
	Linux Kernel Network Developers <netdev@vger.kernel.org>,
	Michael Chan <mchan@broadcom.com>
To: sclark46@earthlink.net
Return-path: <netdev-owner@vger.kernel.org>
Received: from elasmtp-curtail.atl.sa.earthlink.net ([209.86.89.64]:35242 "EHLO
	elasmtp-curtail.atl.sa.earthlink.net" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S1753170Ab1APSLw (ORCPT
	<rfc822;netdev@vger.kernel.org>); Sun, 16 Jan 2011 13:11:52 -0500
In-Reply-To: <4D2EFA44.8080008@earthlink.net>
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

On 01/13/2011 08:12 AM, Stephen Clark wrote:
> On 01/11/2011 10:06 PM, Matt Carlson wrote:
>> lspci -vvv -xxx -s 81:00.0
>
>
>
> Further information - I found these messages in /var/log/messages. It 
> looks
> like after it switched to INTx mode interrupts for other devices were 
> hosed.
>
> Jan 12 08:37:49 localhost kernel: tg3 0000:81:00.0: eth2: No interrupt 
> was gener
> ated using MSI. Switching to INTx mode. Please report this failure to 
> the PCI ma
> intainer and include system chipset information
> Jan 12 08:37:49 localhost kernel: ADDRCONF(NETDEV_UP): eth2: link is 
> not ready
> Jan 12 08:38:50 localhost kernel: ata2: lost interrupt (Status 0x50)
> Jan 12 08:38:50 localhost kernel: ata2.01: exception Emask 0x0 SAct 
> 0x0 SErr 0x0
>  action 0x6 frozen
> Jan 12 08:38:50 localhost kernel: ata2.01: failed command: WRITE DMA
> Jan 12 08:38:50 localhost kernel: ata2.01: cmd 
> ca/00:08:e0:bc:51/00:00:00:00:00/f0 tag 0 dma 4096 out
> Jan 12 08:38:50 localhost kernel:          res 
> 40/00:01:00:4f:c2/00:00:00:00:00/b0 Emask 0x4 (timeout)
> Jan 12 08:38:50 localhost kernel: ata2.01: status: { DRDY }
> Jan 12 08:38:50 localhost kernel: ata2: soft resetting link
> Jan 12 08:38:50 localhost kernel: do_IRQ: 0.64 No irq handler for 
> vector (irq -1)
> Jan 12 08:38:50 localhost kernel: ata2.01: configured for UDMA/33
> Jan 12 08:38:54 localhost pppd[1983]: No response to 3 echo-requests
> Jan 12 08:39:55 localhost pppoe[1988]: Inactivity timeout... something 
> wicked happened on session 3363 
Just checking to make sure you have everything you need?

Thanks,
Steve