[Cluster-devel] Eaton fence agent and more power devices support

[Fabio M. Di Nitto <fdinitto@redhat.com>]

On 1/24/2011 2:19 PM, Arnaud Quette wrote:
> Hi Fabio,
> 
> 2011/1/24 Fabio M. Di Nitto <fdinitto@redhat.com
> <mailto:fdinitto@redhat.com>>
> 
>     On 1/24/2011 1:18 PM, Arnaud Quette wrote:
>     > Hi Marek,
>     >
>     > 2011/1/20 Marek 'marx' Gr?c
>     >
>     >     Hi,
>     >
>     >
>     >     Arnaud Quette wrote:
>     >
>     >         Hi Marek and the list,
>     >
>     >         First of all, happy new year to you all: health, happiness and
>     >         ... high availability ;-)
>     >
>     >         I've just derived a fence_eaton_snmp script, based on
>     >         fence_apc_snmp.
>     >         You'll find attached the diff against the latest fence-agents
>     >         repository.
>     >
>     >         This has been tested with the suitable hardware (Eaton Managed
>     >         ePDU): http://www.epdu.com
>     >         Can you please merge this for the next cman releases.
>     >
>     >     Finally, I was able to review your code. I have few minor
>     >     suggestions how to make code be better but we can solve that
>     later.
>     >     But I can do that later when we will have an access to this
>     device.
>     >     Fence agent will be part of the next fence-agents package.
>     >
>     >
>     > excellent, thanks.
>     > Do you have any idea about the next official release date?
> 
>     It won?t be too long before I?ll cut another upstream release. I am
>     waiting for Marek to push some last fixes and we should be good to go.
> 
>  
> perfect timing.
> is an RPM update also scheduled?
> 

Yes, they always come together.

>     > I'm still checking with Fabio to provide a suitable device for
>     Denmark.
> 
>     Ok perfect, let me know how the search goes. I sent the plug spec in
>     another email. Shouldn?t be too hard to get it. Worst case, send me
>     something that supports 220v/50hz and I?ll do some surgery on other
>     cables :)
> 
> 
> well, the voltage and ouput plugs are not the issue.
> but the input seems to be. I've just got in touch with our Danish
> representative to finalize this.

If it?s a problem, as long as voltage and output plugs do match, I can
handmade a cable. Let?s not make it too complicated.

> I should be able to send you an update around tomorrow.

Ok perfect.

thanks
Fabio