From: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Cc: Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3
Date: Mon, 24 Jan 2011 15:19:16 +0100 [thread overview]
Message-ID: <4D3D8A64.6000305@pengutronix.de> (raw)
In-Reply-To: <1295878532-15769-1-git-send-email-mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 2083 bytes --]
On 01/24/2011 03:15 PM, Marc Kleine-Budde wrote:
> Hello,
>
> as promised I've implemented the proposed workaround for the errata
> 50.2.6.3 & 50.3.5.3:
> "Contents of Mailbox 0 can be sent Even if Mailbox is Disabled"
>
> This means under high bus load it can happen that the mailbox 0 is send
> to the bus. And it does happen, even with the mainline driver where
> Mailbox 0 is a receive mailbox. The errata proposes not to use mailbox 0
> and load it with an unused can_id that will not disturb the bus.
>
> The first patch cleans up the driver without any functional changes, so
> that the mailbox 0 can be disabled in the second patch. The third patch
> adds a sysfs parameter to the driver, so that the identifier of mailbox 0
> can configured.
>
> This series applies to net-2.6/master. It has been tested on a ronetix pm9263
> board against a PCI-SJA1000 card with the canfdtest utility and on custom
> at91 boards against each other.
I've updated the patch series in my git-repo, too.
The following changes since commit b30532515f0a62bfe17207ab00883dd262497006:
bonding: Ensure that we unshare skbs prior to calling pskb_may_pull (2011-01-20 16:45:56 -0800)
are available in the git repository at:
git://git.pengutronix.de/git/mkl/linux-2.6.git can/at91_can-for-net-2.6
Marc Kleine-Budde (3):
can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM
can: at91_can: don't use mailbox 0
can: at91_can: make can_id of mailbox 0 configurable
Documentation/ABI/testing/sysfs-platform-at91 | 25 +++++
drivers/net/can/at91_can.c | 138 ++++++++++++++++++++-----
2 files changed, 137 insertions(+), 26 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-at91
regards, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
[-- Attachment #2: Type: text/plain, Size: 188 bytes --]
_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core
next prev parent reply other threads:[~2011-01-24 14:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-24 14:15 [PATCH v3 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3 Marc Kleine-Budde
[not found] ` <1295878532-15769-1-git-send-email-mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-24 14:15 ` [PATCH v3 1/3] can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM Marc Kleine-Budde
2011-01-24 14:15 ` [PATCH v3 3/3] can: at91_can: make can_id of mailbox 0 configurable Marc Kleine-Budde
2011-01-24 14:19 ` Marc Kleine-Budde [this message]
2011-01-24 23:17 ` [PATCH v3 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3 David Miller
2011-01-24 14:15 ` [PATCH v3 2/3] can: at91_can: don't use mailbox 0 Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D3D8A64.6000305@pengutronix.de \
--to=mkl-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.