From: Jeremy Fitzhardinge <jeremy@goop.org>
To: "Christopher S. Aker" <caker@theshore.net>
Cc: xen devel <xen-devel@lists.xensource.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: Re: xen/next-2.6.38 - 4 multicall(s) failed
Date: Mon, 31 Jan 2011 15:26:09 -0800 [thread overview]
Message-ID: <4D474511.6070805@goop.org> (raw)
In-Reply-To: <4D474263.60408@theshore.net>
On 01/31/2011 03:14 PM, Christopher S. Aker wrote:
> Jeremy,
>
> I know it's early in the game for xen/next-2.6.38, so take this for
> what it is. It'll boot pretty far into userspace but then crap out
> setting up LVM.
Konrad, were you looking at this one?
J
>
> Xen: 3.4.4-rc1-pre 64bit (xenbits @ 19986)
> Dom0: xen/next-2.6.38 @ 438be94
>
> ...[snip]...
> * Setting up LVM Volume Groups...
> 4 multicall(s) failed: cpu 1
> Pid: 5720, comm: vgchange Not tainted 2.6.38-rc2-1+ #1
> Call Trace:
> [<c10037ec>] ? xen_mc_flush+0x11c/0x190
> [<c109a0a2>] ? vmap_pte+0xb2/0x100
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c1091e28>] ? apply_to_page_range_batch+0x178/0x290
> [<c109af16>] ? map_vm_area+0x56/0x80
> [<c1099ff0>] ? vmap_pte+0x0/0x100
> [<c109b79d>] ? __vmalloc_node_range+0x10d/0x180
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c109b875>] ? __vmalloc_node+0x65/0x80
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142ad10>] ? dev_suspend+0x0/0x200
> [<c109ba21>] ? vmalloc+0x31/0x40
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b980>] ? dm_ctl_ioctl+0x120/0x230
> [<c10aa31e>] ? cp_new_stat64+0xee/0x100
> [<c142b860>] ? dm_ctl_ioctl+0x0/0x230
> [<c10b48bb>] ? do_vfs_ioctl+0x8b/0x5c0
> [<c10aa98e>] ? sys_stat64+0x1e/0x30
> [<c10b4e2d>] ? sys_ioctl+0x3d/0x70
> [<c100909c>] ? sysenter_do_call+0x12/0x2c
> [<c134fd06>] ? twa_chrdev_ioctl+0x976/0xae0
> ------------[ cut here ]------------
> WARNING: at arch/x86/xen/multicalls.c:182 xen_leave_lazy_mmu+0x5/0x10()
> Hardware name: X8DT3
> Modules linked in:
> Pid: 5720, comm: vgchange Not tainted 2.6.38-rc2-1+ #1
> Call Trace:
> [<c103a488>] ? warn_slowpath_common+0x78/0xb0
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c103a4db>] ? warn_slowpath_null+0x1b/0x20
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c1091e28>] ? apply_to_page_range_batch+0x178/0x290
> [<c109af16>] ? map_vm_area+0x56/0x80
> [<c1099ff0>] ? vmap_pte+0x0/0x100
> [<c109b79d>] ? __vmalloc_node_range+0x10d/0x180
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c109b875>] ? __vmalloc_node+0x65/0x80
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142ad10>] ? dev_suspend+0x0/0x200
> [<c109ba21>] ? vmalloc+0x31/0x40
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b980>] ? dm_ctl_ioctl+0x120/0x230
> [<c10aa31e>] ? cp_new_stat64+0xee/0x100
> [<c142b860>] ? dm_ctl_ioctl+0x0/0x230
> [<c10b48bb>] ? do_vfs_ioctl+0x8b/0x5c0
> [<c10aa98e>] ? sys_stat64+0x1e/0x30
> [<c10b4e2d>] ? sys_ioctl+0x3d/0x70
> [<c100909c>] ? sysenter_do_call+0x12/0x2c
> [<c134fd06>] ? twa_chrdev_ioctl+0x976/0xae0
> ---[ end trace 9257d86c32002304 ]---
> BUG: unable to handle kernel paging request at f3c00000
> IP: [<c152f5df>] iret_exc+0x783/0xac5
> *pdpt = 000000001944e027 *pde = 000000001abbb067 *pte = 0000000000000000
> Oops: 0002 [#1] SMP
> last sysfs file: /sys/block/md0/dev
> Modules linked in:
>
> Pid: 5720, comm: vgchange Tainted: G W 2.6.38-rc2-1+ #1
> X8DT3/X8DT3
> EIP: 0061:[<c152f5df>] EFLAGS: 00010246 CPU: 1
> EIP is at iret_exc+0x783/0xac5
> EAX: 00000000 EBX: 00004000 ECX: 00004000 EDX: 080ea008
> ESI: 080ea008 EDI: f3c00000 EBP: 00000000 ESP: daae1d70
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0069
> Process vgchange (pid: 5720, ti=daae0000 task=d95d60c0 task.ti=daae0000)
> Stack:
> f3c00000 00004000 080ea008 daae1f04 f3c00000 c142ad10 c142b847 00000004
> 00000013 00000001 00004000 00000134 00000000 00000000 0000020c 00000000
> 00000000 0000fd00 00000000 00000000 00000000 00000000 00000000 00000000
> Call Trace:
> [<c142ad10>] ? dev_suspend+0x0/0x200
> [<c142b847>] ? copy_params+0x87/0xa0
> [<c142b980>] ? dm_ctl_ioctl+0x120/0x230
> [<c10aa31e>] ? cp_new_stat64+0xee/0x100
> [<c142b860>] ? dm_ctl_ioctl+0x0/0x230
> [<c10b48bb>] ? do_vfs_ioctl+0x8b/0x5c0
> [<c10aa98e>] ? sys_stat64+0x1e/0x30
> [<c10b4e2d>] ? sys_ioctl+0x3d/0x70
> [<c100909c>] ? sysenter_do_call+0x12/0x2c
> [<c134fd06>] ? twa_chrdev_ioctl+0x976/0xae0
> Code: e9 2d bc d5 ff 8d 0c 88 e9 d9 bc d5 ff 8d 0c 8b e9 11 bd d5 ff
> ba f2 ff ff ff e9 57 bd d5 ff 01 e9 eb 04 8d 4c 8d 00 51 50 31 c0 <f3>
> aa 58 59 e9 f4 bd d5 ff 8d 0c 88 51 50 31 c0 f3 aa 58 59 e9
> EIP: [<c152f5df>] iret_exc+0x783/0xac5 SS:ESP 0069:daae1d70
> CR2: 00000000f3c00000
> ---[ end trace 9257d86c32002305 ]---
> /etc/rcS.d/S26lvm: line 40: 5720 Killed
> /sbin/vgchange -a y $IGNORELOCKINGFAILURES >/dev/null 2>&1
> * Starting Enterprise Volume Management System...
> device-mapper: table: 253:1: linear: dm-linear: Device lookup failed
>
> 4 multicall(s) failed: cpu 1
> Pid: 5734, comm: evms_activate Tainted: G D W 2.6.38-rc2-1+ #1
> Call Trace:
> [<c10037ec>] ? xen_mc_flush+0x11c/0x190
> [<c109a0a2>] ? vmap_pte+0xb2/0x100
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c1091e28>] ? apply_to_page_range_batch+0x178/0x290
> [<c109af16>] ? map_vm_area+0x56/0x80
> [<c1099ff0>] ? vmap_pte+0x0/0x100
> [<c109b79d>] ? __vmalloc_node_range+0x10d/0x180
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c109b875>] ? __vmalloc_node+0x65/0x80
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142a9d0>] ? table_load+0x0/0x2b0
> [<c109ba21>] ? vmalloc+0x31/0x40
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b980>] ? dm_ctl_ioctl+0x120/0x230
> [<c10a64e5>] ? do_sync_write+0xb5/0xf0
> [<c142b860>] ? dm_ctl_ioctl+0x0/0x230
> [<c10b48bb>] ? do_vfs_ioctl+0x8b/0x5c0
> [<c10d4210>] ? fsnotify+0x100/0x2e0
> [<c10a7013>] ? vfs_write+0x103/0x140
> [<c10b4e2d>] ? sys_ioctl+0x3d/0x70
> [<c100909c>] ? sysenter_do_call+0x12/0x2c
> [<c134fd09>] ? twa_chrdev_ioctl+0x979/0xae0
> call 1/4: op=14 arg=[f3e01000] result=-22 xen_set_pte_at+0xdc/0x120
> call 2/4: op=14 arg=[f3e02000] result=-22 xen_set_pte_at+0xdc/0x120
> call 3/4: op=14 arg=[f3e03000] result=-22 xen_set_pte_at+0xdc/0x120
> call 4/4: op=14 arg=[f3e04000] result=-22 xen_set_pte_at+0xdc/0x120
> ------------[ cut here ]------------
> WARNING: at arch/x86/xen/multicalls.c:182 xen_leave_lazy_mmu+0x5/0x10()
> Hardware name: X8DT3
> Modules linked in:
> Pid: 5734, comm: evms_activate Tainted: G D W 2.6.38-rc2-1+ #1
> Call Trace:
> [<c103a488>] ? warn_slowpath_common+0x78/0xb0
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c103a4db>] ? warn_slowpath_null+0x1b/0x20
> [<c1004895>] ? xen_leave_lazy_mmu+0x5/0x10
> [<c1091e28>] ? apply_to_page_range_batch+0x178/0x290
> [<c109af16>] ? map_vm_area+0x56/0x80
> [<c1099ff0>] ? vmap_pte+0x0/0x100
> [<c109b79d>] ? __vmalloc_node_range+0x10d/0x180
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c109b875>] ? __vmalloc_node+0x65/0x80
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142a9d0>] ? table_load+0x0/0x2b0
> [<c109ba21>] ? vmalloc+0x31/0x40
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b82f>] ? copy_params+0x6f/0xa0
> [<c142b980>] ? dm_ctl_ioctl+0x120/0x230
> [<c10a64e5>] ? do_sync_write+0xb5/0xf0
> [<c142b860>] ? dm_ctl_ioctl+0x0/0x230
> [<c10b48bb>] ? do_vfs_ioctl+0x8b/0x5c0
> [<c10d4210>] ? fsnotify+0x100/0x2e0
> [<c10a7013>] ? vfs_write+0x103/0x140
> [<c10b4e2d>] ? sys_ioctl+0x3d/0x70
> [<c100909c>] ? sysenter_do_call+0x12/0x2c
> [<c134fd09>] ? twa_chrdev_ioctl+0x979/0xae0
> ---[ end trace 9257d86c32002306 ]---
> BUG: unable to handle kernel paging request at f3e01000
> IP: [<c152f5df>] iret_exc+0x783/0xac5
> *pdpt = 0000000019677027 *pde = 000000001aee0067 *pte = 0000000000000000
> Oops: 0002 [#2] SMP
> last sysfs file: /sys/block/sda/size
> Modules linked in:
>
> Pid: 5734, comm: evms_activate Tainted: G D W 2.6.38-rc2-1+ #1
> X8DT3/X8DT3
> EIP: 0061:[<c152f5df>] EFLAGS: 00010246 CPU: 1
> EIP is at iret_exc+0x783/0xac5
> EAX: 00000000 EBX: 00004000 ECX: 00004000 EDX: 0804d6e8
> ESI: 0804d6e8 EDI: f3e01000 EBP: 00000000 ESP: d9867d70
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0069
> Process evms_activate (pid: 5734, ti=d9866000 task=db68b8d0
> task.ti=d9866000)
> Stack:
> f3e01000 00004000 0804d6e8 d9867f04 f3e01000 c142a9d0 c142b847 00000004
> 00000013 00000001 00004000 00000138 00000001 00000000 00000000 00000000
> 00000000 00000000 00000000 32616473 00000000 00000000 00000000 00000000
> Call Trace:
> [<c142a9d0>] ? table_load+0x0/0x2b0
> [<c142b847>] ? copy_params+0x87/0xa0
> [<c142b980>] ? dm_ctl_ioctl+0x120/0x230
> [<c10a64e5>] ? do_sync_write+0xb5/0xf0
> [<c142b860>] ? dm_ctl_ioctl+0x0/0x230
> [<c10b48bb>] ? do_vfs_ioctl+0x8b/0x5c0
> [<c10d4210>] ? fsnotify+0x100/0x2e0
> [<c10a7013>] ? vfs_write+0x103/0x140
> [<c10b4e2d>] ? sys_ioctl+0x3d/0x70
> [<c100909c>] ? sysenter_do_call+0x12/0x2c
> [<c134fd09>] ? twa_chrdev_ioctl+0x979/0xae0
> Code: e9 2d bc d5 ff 8d 0c 88 e9 d9 bc d5 ff 8d 0c 8b e9 11 bd d5 ff
> ba f2 ff ff ff e9 57 bd d5 ff 01 e9 eb 04 8d 4c 8d 00 51 50 31 c0 <f3>
> aa 58 59 e9 f4 bd d5 ff 8d 0c 88 51 50 31 c0 f3 aa 58 59 e9
> EIP: [<c152f5df>] iret_exc+0x783/0xac5 SS:ESP 0069:d9867d70
> CR2: 00000000f3e01000
> ---[ end trace 9257d86c32002307 ]---
>
> -Chris
>
next prev parent reply other threads:[~2011-01-31 23:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 23:14 xen/next-2.6.38 - 4 multicall(s) failed Christopher S. Aker
2011-01-31 23:26 ` Jeremy Fitzhardinge [this message]
2011-02-02 20:10 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D474511.6070805@goop.org \
--to=jeremy@goop.org \
--cc=caker@theshore.net \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.