[PATCH 1/4] davinci: da8xx/omap-l1: add support for SPI

[michael.williamson@criticallink.com (Michael Williamson)]

Hi Sergei,

On 2/1/2011 6:44 AM, Sergei Shtylyov wrote:

> Hello.
> 
> On 01-02-2011 3:05, Michael Williamson wrote:
> 
>> Add SPI registration routines, clocks, and driver resources for
>> DA850/OMAP-L138/AM18x and DA830/OMAP-L137/AM17x platforms.
> 
>> Signed-off-by: Michael Williamson<michael.williamson@criticallink.com>
> [...]
> 
>> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
>> index beda8a4..5f8ff96 100644
>> --- a/arch/arm/mach-davinci/devices-da8xx.c
>> +++ b/arch/arm/mach-davinci/devices-da8xx.c
>> @@ -725,3 +725,91 @@ int __init da8xx_register_cpuidle(void)
>>
>>       return platform_device_register(&da8xx_cpuidle_device);
>>   }
>> +
>> +static struct resource da8xx_spi0_resources[] = {
>> +    [0] = {
>> +        .start = 0x01c41000,
>> +        .end   = 0x01c41fff,
>> +        .flags = IORESOURCE_MEM,
>> +    },
>> +    [1] = {
>> +        .start = IRQ_DA8XX_SPINT0,
>> +        .start = IRQ_DA8XX_SPINT0,
> 
>    You mean '.end'?
> 


Yes.  I will correct.

>> +        .flags = IORESOURCE_IRQ,
>> +    },
>> +    [2] = {
>> +        .start = EDMA_CTLR_CHAN(0, 14),
>> +        .end = EDMA_CTLR_CHAN(0, 14),
> 
>    Could you align = uniformly with resource 0 -- preferably with a tab?
> 


Sure.

>> +        .flags = IORESOURCE_DMA,
>> +    },
>> +    [3] = {
>> +        .start = EDMA_CTLR_CHAN(0, 15),
>> +        .end = EDMA_CTLR_CHAN(0, 15),
> 
>    Same here.
> 
>> +        .flags = IORESOURCE_DMA,
>> +    },
>> +    [4] = {
>> +        .start = 0,
>> +        .end = 0,
> 
>    There's no need to init to 0.
> 


OK.

>> +        .flags = IORESOURCE_DMA,
>> +    },
>> +};
>> +
>> +static struct resource da8xx_spi1_resources[] = {
>> +    [0] = {
>> +        .start = 0x01f0e000,
>> +        .end   = 0x01f0efff,
>> +        .flags = IORESOURCE_MEM,
>> +    },
>> +    [1] = {
>> +        .start = IRQ_DA8XX_SPINT1,
>> +        .start = IRQ_DA8XX_SPINT1,
> 
>    You meand '.end'?
> 


I did, but I see that .end is not used by platform_get_irq(), only .start.
[wondering why testing didn't catch this, and why no compiler warnings on
 double assignment].  I will correct. Thanks.

>> +        .flags = IORESOURCE_IRQ,
>> +    },
>> +    [2] = {
>> +        .start = EDMA_CTLR_CHAN(0, 18),
>> +        .end = EDMA_CTLR_CHAN(0, 18),
> 
>    Could you align = uniformly with resource 0 -- preferably with a tab?
> 


Sure.

>> +        .flags = IORESOURCE_DMA,
>> +    },
>> +    [3] = {
>> +        .start = EDMA_CTLR_CHAN(0, 19),
>> +        .end = EDMA_CTLR_CHAN(0, 19),
> 
>    Same here.
> 


Got it.

>> +        .flags = IORESOURCE_DMA,
>> +    },
>> +    [4] = {
>> +        .start = 0,
>> +        .end = 0,
> 
>    There's no need to init to 0.
> 


OK.

>> +        .flags = IORESOURCE_DMA,
>> +    },
>> +};
>> +
>> +static struct platform_device da8xx_spi_device[] = {
>> +    [0] = {
>> +        .name = "spi_davinci",
>> +        .id = 0,
>> +        .num_resources = ARRAY_SIZE(da8xx_spi0_resources),
>> +        .resource = da8xx_spi0_resources,
>> +    },
>> +    [1] = {
>> +        .name = "spi_davinci",
>> +        .id = 1,
>> +        .num_resources = ARRAY_SIZE(da8xx_spi1_resources),
>> +        .resource = da8xx_spi1_resources,
>> +    },
>> +};
>> +
>> +int __init da8xx_register_spi(int instance,
>> +                  struct davinci_spi_platform_data *pdata)
>> +{
>> +    struct platform_device *pdev;
>> +
>> +    if (instance == 0)
>> +        pdev =&da8xx_spi_device[0];
>> +    else if (instance == 1)
>> +        pdev =&da8xx_spi_device[1];
> 
>    Why not:
> 
>     if (instance == 0 || instance == 1)
>         pdev = &da8xx_spi_device[instance];
> 


OK.

>> +    else
>> +        return -EINVAL;
>> +
>> +    pdev->dev.platform_data = pdata;
>> +
>> +    return platform_device_register(pdev);
>> +}
> 
> WBR, Sergei


Thanks for the review Sergei.

-Mike