All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dirk Brandewie <dirk.brandewie@gmail.com>
To: Thomas Chou <thomas@wytron.com.tw>
Cc: David Brownell <dbrownell@users.sourceforge.net>,
	Grant Likely <grant.likely@secretlab.ca>,
	nios2-dev@sopc.et.ntust.edu.tw,
	devicetree-discuss@lists.ozlabs.org,
	linux-kernel@vger.kernel.org,
	spi-devel-general@lists.sourceforge.net
Subject: Re: [PATCH v4] spi: add OpenCores tiny SPI driver
Date: Thu, 03 Feb 2011 07:20:32 -0800	[thread overview]
Message-ID: <4D4AC7C0.4050608@gmail.com> (raw)
In-Reply-To: <1296729466-2936-1-git-send-email-thomas@wytron.com.tw>

On 02/03/2011 02:37 AM, Thomas Chou wrote:
> This patch adds support of OpenCores tiny SPI driver.
>
> http://opencores.org/project,tiny_spi
>

> +static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
> +{
> +	struct tiny_spi *hw = tiny_spi_to_hw(spi);
> +	const u8 *txp = t->tx_buf;
> +	u8 *rxp = t->rx_buf;
> +	unsigned int i;
> +
> +	if (hw->irq>= 0) {
> +		/* use intrrupt driven data transfer */
> +		hw->len = t->len;
> +		hw->txp = t->tx_buf;
> +		hw->rxp = t->rx_buf;
> +		hw->txc = 0;
> +		hw->rxc = 0;
> +
> +		/* send the first byte */
> +		if (t->len>  1) {
> +			writeb(hw->txp ? *hw->txp++ : 0,
> +			       hw->base + TINY_SPI_TXDATA);
> +			hw->txc++;
> +			writeb(hw->txp ? *hw->txp++ : 0,
> +			       hw->base + TINY_SPI_TXDATA);
> +			hw->txc++;
> +			writeb(TINY_SPI_STATUS_TXR, hw->base + TINY_SPI_STATUS);
> +		} else {
> +			writeb(hw->txp ? *hw->txp++ : 0,
> +			       hw->base + TINY_SPI_TXDATA);
> +			hw->txc++;
> +			writeb(TINY_SPI_STATUS_TXE, hw->base + TINY_SPI_STATUS);
> +		}
> +
> +		wait_for_completion(&hw->done);
> +	} else if (txp&&  rxp) {
> +		/* we need to tighten the transfer loop */
> +		writeb(*txp++, hw->base + TINY_SPI_TXDATA);
> +		if (t->len>  1) {
> +			writeb(*txp++, hw->base + TINY_SPI_TXDATA);
> +			for (i = 2; i<  t->len; i++) {
> +				u8 rx, tx = *txp++;
> +				while (!(readb(hw->base + TINY_SPI_STATUS)&
> +					 TINY_SPI_STATUS_TXR))
> +					cpu_relax();

Putting the read status, cpu releax in an inline function would make this 
function a lot easier to read.

> +				rx = readb(hw->base + TINY_SPI_TXDATA);
> +				writeb(tx, hw->base + TINY_SPI_TXDATA);
> +				*rxp++ = rx;
> +			}
> +			while (!(readb(hw->base + TINY_SPI_STATUS)&
> +				 TINY_SPI_STATUS_TXR))
> +				cpu_relax();
> +			*rxp++ = readb(hw->base + TINY_SPI_TXDATA);
> +		}
> +		while (!(readb(hw->base + TINY_SPI_STATUS)&
> +			 TINY_SPI_STATUS_TXE))
> +			cpu_relax();
> +		*rxp++ = readb(hw->base + TINY_SPI_RXDATA);
> +	} else if (rxp) {
> +		writeb(0, hw->base + TINY_SPI_TXDATA);
> +		if (t->len>  1) {
> +			writeb(0,
> +			       hw->base + TINY_SPI_TXDATA);
> +			for (i = 2; i<  t->len; i++) {
> +				u8 rx;
> +				while (!(readb(hw->base + TINY_SPI_STATUS)&
> +					 TINY_SPI_STATUS_TXR))
> +					cpu_relax();
> +				rx = readb(hw->base + TINY_SPI_TXDATA);
> +				writeb(0,
> +				       hw->base + TINY_SPI_TXDATA);
> +				*rxp++ = rx;
> +			}
> +			while (!(readb(hw->base + TINY_SPI_STATUS)&
> +				 TINY_SPI_STATUS_TXR))
> +				cpu_relax();
> +			*rxp++ = readb(hw->base + TINY_SPI_TXDATA);
> +		}
> +		while (!(readb(hw->base + TINY_SPI_STATUS)&
> +			 TINY_SPI_STATUS_TXE))
> +			cpu_relax();
> +		*rxp++ = readb(hw->base + TINY_SPI_RXDATA);
> +	} else if (txp) {
> +		writeb(*txp++, hw->base + TINY_SPI_TXDATA);
> +		if (t->len>  1) {
> +			writeb(*txp++, hw->base + TINY_SPI_TXDATA);
> +			for (i = 2; i<  t->len; i++) {
> +				u8 tx = *txp++;
> +				while (!(readb(hw->base + TINY_SPI_STATUS)&
> +					 TINY_SPI_STATUS_TXR))
> +					cpu_relax();
> +				writeb(tx, hw->base + TINY_SPI_TXDATA);
> +			}
> +		}
> +		while (!(readb(hw->base + TINY_SPI_STATUS)&
> +			 TINY_SPI_STATUS_TXE))
> +			cpu_relax();
> +	} else {
> +		writeb(0, hw->base + TINY_SPI_TXDATA);
> +		if (t->len>  1) {
> +			writeb(0,
> +			       hw->base + TINY_SPI_TXDATA);
> +			for (i = 2; i<  t->len; i++) {
> +				while (!(readb(hw->base + TINY_SPI_STATUS)&
> +					 TINY_SPI_STATUS_TXR))
> +					cpu_relax();
> +				writeb(0,
> +				       hw->base + TINY_SPI_TXDATA);
> +			}
> +		}
> +		while (!(readb(hw->base + TINY_SPI_STATUS)&
> +			 TINY_SPI_STATUS_TXE))
> +			cpu_relax();
> +	}
> +	return t->len;
> +}

      parent reply	other threads:[~2011-02-03 15:20 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1294645208-6322-1-git-send-email-thomas@wytron.com.tw>
     [not found] ` <1294645208-6322-1-git-send-email-thomas-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-01-12  2:41   ` [PATCH v2] spi: add OpenCores tiny SPI driver Thomas Chou
2011-01-12  2:41     ` Thomas Chou
     [not found]     ` <1294800109-31603-1-git-send-email-thomas-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-01-17  7:32       ` Thomas Chou
2011-01-17  7:32         ` Thomas Chou
     [not found]         ` <1295249542-26743-1-git-send-email-thomas-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-01-20 16:54           ` Grant Likely
2011-01-20 16:54             ` Grant Likely
2011-01-20 21:36             ` Thomas Chou
     [not found]               ` <4D38AAEB.7020308-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-01-21 12:27                 ` Jonas Bonn
2011-01-21 12:27                   ` Jonas Bonn
2011-01-24  1:19                   ` Thomas Chou
2011-01-24  1:19                     ` Thomas Chou
     [not found]                     ` <4D3CD38D.4080808-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-01-24 10:59                       ` Jonas Bonn
2011-01-24 10:59                         ` Jonas Bonn
2011-01-24 14:50                         ` Thomas Chou
2011-01-24 14:50                           ` Thomas Chou
     [not found]                           ` <4D3D91D1.8000701-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-01-24 15:50                             ` Grant Likely
2011-01-24 15:50                               ` Grant Likely
2011-01-25  3:17                         ` [PATCH v3] " Thomas Chou
2011-01-25  3:17                           ` Thomas Chou
     [not found]                           ` <1295925450-28550-1-git-send-email-thomas-SDxUXYEhEBiCuPEqFHbRBg@public.gmane.org>
2011-02-03 10:37                             ` [PATCH v4] " Thomas Chou
2011-02-03 10:37                               ` Thomas Chou
2011-02-03 11:03                               ` Wolfram Sang
2011-02-03 15:20                               ` Dirk Brandewie [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D4AC7C0.4050608@gmail.com \
    --to=dirk.brandewie@gmail.com \
    --cc=dbrownell@users.sourceforge.net \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nios2-dev@sopc.et.ntust.edu.tw \
    --cc=spi-devel-general@lists.sourceforge.net \
    --cc=thomas@wytron.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.