From: "Justin P. Mattock" <justinmattock@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: WARNING: at kernel/lockdep.c:3151 check_flags+0x63/0x179()
Date: Mon, 07 Feb 2011 19:58:37 -0800 [thread overview]
Message-ID: <4D50BF6D.5050408@gmail.com> (raw)
not sure if this is o.k. or not due to the message giving me a few
messages(full dmesg below)
[ 0.046719] lockdep: fixing up alternatives.
[ 0.046981] ------------[ cut here ]------------
[ 0.046996] WARNING: at kernel/lockdep.c:3151 check_flags+0x63/0x179()
[ 0.046996] Hardware name: MacBookPro2,2
[ 0.046996] Modules linked in:
[ 0.046996] Pid: 4, comm: kworker/0:0 Not tainted 2.6.38-rc4 #1
[ 0.046996] Call Trace:
[ 0.046996] [<ffffffff81062aa8>] ? warn_slowpath_common+0x80/0x98
[ 0.046996] [<ffffffff8106ff00>] ? del_timer_sync+0x0/0xad
[ 0.046996] [<ffffffff81062ad5>] ? warn_slowpath_null+0x15/0x17
[ 0.046996] [<ffffffff8108e4fd>] ? check_flags+0x63/0x179
[ 0.046996] [<ffffffff81093d9f>] ? lock_acquire+0x59/0x109
[ 0.046996] [<ffffffff8105b199>] ? get_parent_ip+0x11/0x41
[ 0.046996] [<ffffffff8106ff48>] ? del_timer_sync+0x48/0xad
[ 0.046996] [<ffffffff8106ff00>] ? del_timer_sync+0x0/0xad
[ 0.046996] [<ffffffff81079634>] ? manage_workers+0xee/0x191
[ 0.046996] [<ffffffff81079810>] ? worker_thread+0x139/0x350
[ 0.046996] [<ffffffff810796d7>] ? worker_thread+0x0/0x350
[ 0.046996] [<ffffffff8107ecfc>] ? kthread+0x89/0x91
[ 0.046996] [<ffffffff8102e9a4>] ? kernel_thread_helper+0x4/0x10
[ 0.046996] [<ffffffff81483354>] ? restore_args+0x0/0x30
[ 0.046996] [<ffffffff8107ec73>] ? kthread+0x0/0x91
[ 0.046996] [<ffffffff8102e9a0>] ? kernel_thread_helper+0x0/0x10
[ 0.046996] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.046996] possible reason: unannotated irqs-off.
[ 0.046996] irq event stamp: 40
<----- cut ----->
] Initializing RT-Tester: OK
[ 0.477516] ====[ backtrace testing ]===========
[ 0.477685] Testing a backtrace from process context.
[ 0.477853] The following trace is a kernel self test and not a bug!
[ 0.478146] Pid: 1, comm: swapper Tainted: G W 2.6.38-rc4 #1
[ 0.478318] Call Trace:
[ 0.478495] [<ffffffff810a59c5>] ? backtrace_regression_test+0x38/0xff
[ 0.478671] [<ffffffff81480c2d>] ? mutex_unlock+0x9/0xb
[ 0.478845] [<ffffffff812bbfc0>] ? misc_register+0x10d/0x115
[ 0.479037] [<ffffffff81953134>] ? snapshot_device_init+0x0/0x12
[ 0.479212] [<ffffffff81000210>] ? do_one_initcall+0x7a/0x139
[ 0.479388] [<ffffffff8193f68e>] ? kernel_init+0x13d/0x1c1
[ 0.479561] [<ffffffff8102e9a4>] ? kernel_thread_helper+0x4/0x10
[ 0.479735] [<ffffffff81483354>] ? restore_args+0x0/0x30
[ 0.479906] [<ffffffff8193f551>] ? kernel_init+0x0/0x1c1
[ 0.480095] [<ffffffff8102e9a0>] ? kernel_thread_helper+0x0/0x10
[ 0.480266] Testing a backtrace from irq context.
full dmesg..:
[ 0.000000] Linux version 2.6.38-rc4 (justin@Linux-2) (gcc version
4.4.2 (GCC) ) #1 SMP Mon Feb 7 19:33:30 PST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda3 ro
debug audit=1 selinux=1 enforcing=0 vga=790
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f083000 (usable)
[ 0.000000] BIOS-e820: 000000003f083000 - 000000003f284000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f284000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Mac-F42187C8/MacBookPro2,2, BIOS
MBP22.88Z.00A5.B07.0708131242 08/13/07
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f083 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f083000
[ 0.000000] 0000000000 - 003f000000 page 2M
[ 0.000000] 003f000000 - 003f083000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f083000 @
1fffd000-20000000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000003fefd1c0 00074 (v01 APPLE Apple00
000000A5 01000013)
[ 0.000000] ACPI: FACP 000000003fefb000 000F4 (v03 APPLE Apple00
000000A5 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000003fef0000 048D1 (v01 APPLE MacBookP
00020002 INTL 20050309)
[ 0.000000] ACPI: FACS 000000003fec0000 00040
[ 0.000000] ACPI: HPET 000000003fefa000 00038 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000003fef9000 00068 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 000000003fef8000 0003C (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 000000003fef7000 000A0 (v32 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000003fef6000 00030 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000003fef5000 00053 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000003feef000 004DC (v01 APPLE CpuPm
00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 000000003febd000 0064F (v01 SataRe SataPri
00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT 000000003febc000 0069C (v01 SataRe SataSec
00001000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD ->
[ffff88003d800000-ffff88003e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f083
[ 0.000000] On node 0 totalpages: 258066
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3474 pages used for memmap
[ 0.000000] DMA32 zone: 250609 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:b0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 474 pages/cpu @ffff88003d400000 s1912768
r8192 d20544 u2097152
[ 0.000000] pcpu-alloc: s1912768 r8192 d20544 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 254530
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz
root=/dev/sda3 ro debug audit=1 selinux=1 enforcing=0 vga=790
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 992612k/1032716k available (4649k kernel code,
452k absent, 39652k reserved, 2943k data, 2312k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000]
----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock
|mutex | wsem | rsem |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok |
ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok |
ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok |
ok | ok | ok |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok |
| ok |
[ 0.000000] recursive read-lock #2: | ok |
| ok |
[ 0.000000] mixed read-write-lock: | ok |
| ok |
[ 0.000000] mixed write-read-lock: | ok |
| ok |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 218 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2161.271 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4322.54 BogoMIPS (lpj=2161271)
[ 0.001346] pid_max: default: 32768 minimum: 301
[ 0.002209] Security Framework initialized
[ 0.002391] SELinux: Initializing.
[ 0.002644] SELinux: Starting in permissive mode
[ 0.003071] Mount-cache hash table entries: 256
[ 0.004949] CPU: Physical Processor ID: 0
[ 0.005007] CPU: Processor Core ID: 0
[ 0.005175] mce: CPU supports 6 MCE banks
[ 0.005352] CPU0: Thermal monitoring enabled (TM2)
[ 0.005524] using mwait in idle threads.
[ 0.007121] ACPI: Core revision 20110112
[ 0.033616] Setting APIC routing to flat
[ 0.034295] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044476] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz
stepping 06
[ 0.044996] Performance Events: PEBS fmt0-, Core2 events, Intel PMU
driver.
[ 0.044996] PEBS disabled due to CPU errata.
[ 0.044996] ... version: 2
[ 0.044996] ... bit width: 40
[ 0.044996] ... generic registers: 2
[ 0.045000] ... value mask: 000000ffffffffff
[ 0.045171] ... max period: 000000007fffffff
[ 0.045341] ... fixed-purpose events: 3
[ 0.045510] ... event mask: 0000000700000003
[ 0.046719] lockdep: fixing up alternatives.
[ 0.046981] ------------[ cut here ]------------
[ 0.046996] WARNING: at kernel/lockdep.c:3151 check_flags+0x63/0x179()
[ 0.046996] Hardware name: MacBookPro2,2
[ 0.046996] Modules linked in:
[ 0.046996] Pid: 4, comm: kworker/0:0 Not tainted 2.6.38-rc4 #1
[ 0.046996] Call Trace:
[ 0.046996] [<ffffffff81062aa8>] ? warn_slowpath_common+0x80/0x98
[ 0.046996] [<ffffffff8106ff00>] ? del_timer_sync+0x0/0xad
[ 0.046996] [<ffffffff81062ad5>] ? warn_slowpath_null+0x15/0x17
[ 0.046996] [<ffffffff8108e4fd>] ? check_flags+0x63/0x179
[ 0.046996] [<ffffffff81093d9f>] ? lock_acquire+0x59/0x109
[ 0.046996] [<ffffffff8105b199>] ? get_parent_ip+0x11/0x41
[ 0.046996] [<ffffffff8106ff48>] ? del_timer_sync+0x48/0xad
[ 0.046996] [<ffffffff8106ff00>] ? del_timer_sync+0x0/0xad
[ 0.046996] [<ffffffff81079634>] ? manage_workers+0xee/0x191
[ 0.046996] [<ffffffff81079810>] ? worker_thread+0x139/0x350
[ 0.046996] [<ffffffff810796d7>] ? worker_thread+0x0/0x350
[ 0.046996] [<ffffffff8107ecfc>] ? kthread+0x89/0x91
[ 0.046996] [<ffffffff8102e9a4>] ? kernel_thread_helper+0x4/0x10
[ 0.046996] [<ffffffff81483354>] ? restore_args+0x0/0x30
[ 0.046996] [<ffffffff8107ec73>] ? kthread+0x0/0x91
[ 0.046996] [<ffffffff8102e9a0>] ? kernel_thread_helper+0x0/0x10
[ 0.046996] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.046996] possible reason: unannotated irqs-off.
[ 0.046996] irq event stamp: 40
[ 0.046996] hardirqs last enabled at (39): [<ffffffff8148308b>]
_raw_spin_unlock_irqrestore+0x42/0x51
[ 0.046996] hardirqs last disabled at (38): [<ffffffff81055600>]
task_rq_lock+0x35/0x7e
[ 0.046996] softirqs last enabled at (0): [<ffffffff81061344>]
copy_process+0x35c/0x1120
[ 0.046996] softirqs last disabled at (40): [<ffffffff8106ff25>]
del_timer_sync+0x25/0xad
[ 0.047047] Booting Node 0, Processors #1 Ok.
[ 0.120017] Brought up 2 CPUs
[ 0.120189] Total of 2 processors activated (8644.86 BogoMIPS).
[ 0.123145] atomic64 test passed for x86-64 platform with CX8 and
with SSE
[ 0.123470] NET: Registered protocol family 16
[ 0.125255] ACPI: bus type pci registered
[ 0.125992] PCI: Using configuration type 1 for base access
[ 0.152094] bio: create slab <bio-0> at 0
[ 0.157600] ACPI: EC: EC description table is found, configuring boot EC
[ 0.168807] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.174509] ACPI: SSDT 000000003feb8c10 002AE (v01 APPLE Cpu0Ist
00003000 INTL 20050309)
[ 0.175992] ACPI: Dynamic OEM Table Load:
[ 0.176337] ACPI: SSDT (null) 002AE (v01 APPLE Cpu0Ist
00003000 INTL 20050309)
[ 0.177633] ACPI: SSDT 000000003feb8910 002A0 (v01 APPLE Cpu0Cst
00003001 INTL 20050309)
[ 0.179011] ACPI: Dynamic OEM Table Load:
[ 0.179354] ACPI: SSDT (null) 002A0 (v01 APPLE Cpu0Cst
00003001 INTL 20050309)
[ 0.183787] ACPI: SSDT 000000003feb8f10 00087 (v01 APPLE Cpu1Ist
00003000 INTL 20050309)
[ 0.185205] ACPI: Dynamic OEM Table Load:
[ 0.185548] ACPI: SSDT (null) 00087 (v01 APPLE Cpu1Ist
00003000 INTL 20050309)
[ 0.186753] ACPI: SSDT 000000003feb7f10 00085 (v01 APPLE Cpu1Cst
00003000 INTL 20050309)
[ 0.188122] ACPI: Dynamic OEM Table Load:
[ 0.188465] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst
00003000 INTL 20050309)
[ 0.195019] ACPI: Interpreter enabled
[ 0.195190] ACPI: (supports S0 S3 S4 S5)
[ 0.195803] ACPI: Using IOAPIC for interrupt routing
[ 0.237073] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.241629] ACPI: No dock devices found.
[ 0.241805] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.245244] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.250611] pci_root PNP0A08:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.250862] pci_root PNP0A08:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.250975] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.251227] pci_root PNP0A08:00: host bridge window [mem
0x40000000-0xfebfffff] (ignored)
[ 0.251496] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.251738] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[ 0.252029] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.252202] pci 0000:00:01.0: PME# disabled
[ 0.252404] pci 0000:00:07.0: [8086:27a3] type 0 class 0x001101
[ 0.252588] pci 0000:00:07.0: reg 10: [mem 0x50404000-0x50404fff]
[ 0.252880] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.252997] pci 0000:00:1b.0: reg 10: [mem 0x50400000-0x50403fff 64bit]
[ 0.253278] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.253454] pci 0000:00:1b.0: PME# disabled
[ 0.253656] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.254078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.254253] pci 0000:00:1c.0: PME# disabled
[ 0.254459] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.257077] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.257252] pci 0000:00:1c.1: PME# disabled
[ 0.257457] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.258090] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.258265] pci 0000:00:1c.2: PME# disabled
[ 0.258476] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.258714] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
[ 0.259023] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.259267] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
[ 0.259488] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.259723] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
[ 0.260032] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.260270] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
[ 0.260512] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.260711] pci 0000:00:1d.7: reg 10: [mem 0x50405400-0x504057ff]
[ 0.261018] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.261195] pci 0000:00:1d.7: PME# disabled
[ 0.261394] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.261671] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.261977] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by
ICH6 ACPI/GPIO/TCO
[ 0.262229] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by
ICH6 GPIO
[ 0.262405] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0680 (mask 000f)
[ 0.262656] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
1640 (mask 000f)
[ 0.262911] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at
0300 (mask 001f)
[ 0.263022] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.263211] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
[ 0.263394] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
[ 0.263577] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
[ 0.263760] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
[ 0.263984] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
[ 0.264211] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.264405] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
[ 0.264588] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
[ 0.264771] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
[ 0.264984] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
[ 0.265166] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
[ 0.265349] pci 0000:00:1f.2: reg 24: [mem 0x50405000-0x504053ff]
[ 0.265561] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.265734] pci 0000:00:1f.2: PME# disabled
[ 0.265995] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.266249] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.266546] pci 0000:01:00.0: [1002:71c5] type 0 class 0x000300
[ 0.266732] pci 0000:01:00.0: reg 10: [mem 0x40000000-0x47ffffff pref]
[ 0.266985] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
[ 0.267167] pci 0000:01:00.0: reg 18: [mem 0x50300000-0x5030ffff]
[ 0.267376] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.267581] pci 0000:01:00.0: supports D1 D2
[ 0.267763] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.267936] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.267973] pci 0000:00:01.0: bridge window [mem 0x50300000-0x503fffff]
[ 0.268149] pci 0000:00:01.0: bridge window [mem
0x40000000-0x47ffffff 64bit pref]
[ 0.268509] pci 0000:02:00.0: [11ab:4362] type 0 class 0x000200
[ 0.268713] pci 0000:02:00.0: reg 10: [mem 0x50200000-0x50203fff 64bit]
[ 0.268988] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.269225] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.269460] pci 0000:02:00.0: supports D1 D2
[ 0.269630] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269807] pci 0000:02:00.0: PME# disabled
[ 0.269986] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.270160] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.270335] pci 0000:00:1c.0: bridge window [mem 0x50200000-0x502fffff]
[ 0.270514] pci 0000:00:1c.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.270872] pci 0000:03:00.0: [168c:0024] type 0 class 0x000280
[ 0.271003] pci 0000:03:00.0: reg 10: [mem 0x50100000-0x5010ffff 64bit]
[ 0.271316] pci 0000:03:00.0: supports D1
[ 0.271485] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.271661] pci 0000:03:00.0: PME# disabled
[ 0.271996] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.272170] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.272346] pci 0000:00:1c.1: bridge window [mem 0x50100000-0x501fffff]
[ 0.272526] pci 0000:00:1c.1: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.272853] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.272974] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.273147] pci 0000:00:1c.2: bridge window [mem 0x4c100000-0x500fffff]
[ 0.273326] pci 0000:00:1c.2: bridge window [mem
0x48000000-0x4bffffff 64bit pref]
[ 0.273645] pci 0000:0c:03.0: [104c:8025] type 0 class 0x000c00
[ 0.273844] pci 0000:0c:03.0: reg 10: [mem 0x4c004000-0x4c0047ff]
[ 0.273985] pci 0000:0c:03.0: reg 14: [mem 0x4c000000-0x4c003fff]
[ 0.274263] pci 0000:0c:03.0: supports D1 D2
[ 0.274432] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.274610] pci 0000:0c:03.0: PME# disabled
[ 0.274977] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive
decode)
[ 0.275153] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.275329] pci 0000:00:1e.0: bridge window [mem 0x4c000000-0x4c0fffff]
[ 0.275509] pci 0000:00:1e.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.275761] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.275971] pci 0000:00:1e.0: bridge window [mem
0x00000000-0xfffffffff] (subtractive decode)
[ 0.276265] pci_bus 0000:00: on NUMA node 0
[ 0.276440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.277946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.278402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.279153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.279745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.280453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.318174] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.319942] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.321417] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.323292] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.324769] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.326583] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.328252] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12
14 15)
[ 0.329852] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.331120] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.331989] vgaarb: loaded
[ 0.333010] SCSI subsystem initialized
[ 0.333191] libata version 3.00 loaded.
[ 0.334099] usbcore: registered new interface driver usbfs
[ 0.334239] usbcore: registered new interface driver hub
[ 0.335025] usbcore: registered new device driver usb
[ 0.336039] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.336208] PCI: Using ACPI for IRQ routing
[ 0.336378] PCI: pci_cache_line_size set to 64 bytes
[ 0.336767] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.336866] reserve RAM buffer: 000000003f083000 - 000000003fffffff
[ 0.338238] NetLabel: Initializing
[ 0.338961] NetLabel: domain hash size = 128
[ 0.339130] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.339385] NetLabel: unlabeled traffic allowed by default
[ 0.339562] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.339741] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.340471] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.341971] cfg80211: Calling CRDA to update world regulatory domain
[ 0.343044] Switching to clocksource hpet
[ 0.343495] Switched to NOHz mode on CPU #0
[ 0.343610] Switched to NOHz mode on CPU #1
[ 0.356384] FS-Cache: Loaded
[ 0.356799] pnp: PnP ACPI init
[ 0.357022] ACPI: bus type pnp registered
[ 0.359752] pnp 00:00: [bus 00-ff]
[ 0.359923] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.360114] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.360284] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.360455] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.360627] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.360799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.360970] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.361168] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.361340] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.361511] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.361682] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.361854] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.362042] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.362213] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.362384] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.362555] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.362726] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.362898] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.363385] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.363674] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.363851] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.364039] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.364210] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.364380] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.364550] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[ 0.365024] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.365198] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.365380] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.365554] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.365728] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.365902] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.366092] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367534] pnp 00:02: [io 0x0300-0x031f]
[ 0.367717] pnp 00:02: [irq 6]
[ 0.371000] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.371416] pnp 00:03: [io 0x0000-0x001f]
[ 0.371586] pnp 00:03: [io 0x0081-0x0091]
[ 0.371756] pnp 00:03: [io 0x0093-0x009f]
[ 0.371925] pnp 00:03: [io 0x00c0-0x00df]
[ 0.372107] pnp 00:03: [dma 4]
[ 0.372512] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.372734] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.373191] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.373793] pnp 00:05: [irq 0 disabled]
[ 0.373968] pnp 00:05: [irq 8]
[ 0.374173] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.374686] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.374861] system 00:05: Plug and Play ACPI device, IDs PNP0103
PNP0c01 (active)
[ 0.375179] pnp 00:06: [io 0x00f0]
[ 0.375355] pnp 00:06: [irq 13]
[ 0.375778] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.376084] pnp 00:07: [io 0x002e-0x002f]
[ 0.376255] pnp 00:07: [io 0x004e-0x004f]
[ 0.376424] pnp 00:07: [io 0x0061]
[ 0.376591] pnp 00:07: [io 0x0063]
[ 0.376767] pnp 00:07: [io 0x0065]
[ 0.376936] pnp 00:07: [io 0x0067]
[ 0.377116] pnp 00:07: [io 0x0070]
[ 0.377292] pnp 00:07: [io 0x0080]
[ 0.377465] pnp 00:07: [io 0x0092]
[ 0.377634] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.377803] pnp 00:07: [io 0x0680-0x06ef]
[ 0.377970] pnp 00:07: [io 0x0800-0x080f]
[ 0.378207] pnp 00:07: [io 0x0810-0x0817]
[ 0.378376] pnp 00:07: [io 0x0400-0x047f]
[ 0.378545] pnp 00:07: [io 0x0500-0x053f]
[ 0.378715] pnp 00:07: [io 0x1640-0x164f]
[ 0.378912] pnp 00:07: disabling [io 0x1640-0x164f] because it
overlaps 0000:00:1c.2 BAR 7 [io 0x1000-0x1fff]
[ 0.379493] system 00:07: [io 0x0680-0x06ef] has been reserved
[ 0.379668] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.379840] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.380028] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.380201] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.380374] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.380585] pnp 00:08: [io 0x0070-0x0077]
[ 0.381018] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.384497] pnp: PnP ACPI: found 9 devices
[ 0.384666] ACPI: ACPI bus type pnp unregistered
[ 0.406887] pci 0000:01:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 0.407162] pci 0000:02:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 0.407488] pci 0000:00:1c.0: BAR 9: assigned [mem
0x50500000-0x506fffff pref]
[ 0.407742] pci 0000:00:1c.1: BAR 9: assigned [mem
0x50700000-0x508fffff 64bit pref]
[ 0.407995] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
[ 0.408187] pci 0000:01:00.0: BAR 6: assigned [mem
0x50320000-0x5033ffff pref]
[ 0.408439] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.408610] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.408790] pci 0000:00:01.0: bridge window [mem 0x50300000-0x503fffff]
[ 0.408965] pci 0000:00:01.0: bridge window [mem
0x40000000-0x47ffffff 64bit pref]
[ 0.409236] pci 0000:02:00.0: BAR 6: assigned [mem
0x50500000-0x5051ffff pref]
[ 0.409488] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.409670] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.409847] pci 0000:00:1c.0: bridge window [mem 0x50200000-0x502fffff]
[ 0.410038] pci 0000:00:1c.0: bridge window [mem
0x50500000-0x506fffff pref]
[ 0.410296] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.410472] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.410650] pci 0000:00:1c.1: bridge window [mem 0x50100000-0x501fffff]
[ 0.410826] pci 0000:00:1c.1: bridge window [mem
0x50700000-0x508fffff 64bit pref]
[ 0.411100] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.411272] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.411448] pci 0000:00:1c.2: bridge window [mem 0x4c100000-0x500fffff]
[ 0.411624] pci 0000:00:1c.2: bridge window [mem
0x48000000-0x4bffffff 64bit pref]
[ 0.411881] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.412068] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.412244] pci 0000:00:1e.0: bridge window [mem 0x4c000000-0x4c0fffff]
[ 0.412419] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.412615] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.412790] pci 0000:00:01.0: setting latency timer to 64
[ 0.412972] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.413165] pci 0000:00:1c.0: setting latency timer to 64
[ 0.413344] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.413520] pci 0000:00:1c.1: setting latency timer to 64
[ 0.413702] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.413878] pci 0000:00:1c.2: setting latency timer to 64
[ 0.414226] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.414401] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.414578] pci 0000:00:1e.0: setting latency timer to 64
[ 0.414751] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.414922] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.415113] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.415282] pci_bus 0000:01: resource 1 [mem 0x50300000-0x503fffff]
[ 0.415453] pci_bus 0000:01: resource 2 [mem 0x40000000-0x47ffffff
64bit pref]
[ 0.415702] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.415873] pci_bus 0000:02: resource 1 [mem 0x50200000-0x502fffff]
[ 0.416060] pci_bus 0000:02: resource 2 [mem 0x50500000-0x506fffff pref]
[ 0.416231] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.416402] pci_bus 0000:03: resource 1 [mem 0x50100000-0x501fffff]
[ 0.416574] pci_bus 0000:03: resource 2 [mem 0x50700000-0x508fffff
64bit pref]
[ 0.416822] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.416993] pci_bus 0000:04: resource 1 [mem 0x4c100000-0x500fffff]
[ 0.417179] pci_bus 0000:04: resource 2 [mem 0x48000000-0x4bffffff
64bit pref]
[ 0.417428] pci_bus 0000:0c: resource 1 [mem 0x4c000000-0x4c0fffff]
[ 0.417599] pci_bus 0000:0c: resource 4 [io 0x0000-0xffff]
[ 0.417770] pci_bus 0000:0c: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.418064] NET: Registered protocol family 2
[ 0.418394] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.419278] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[ 0.420709] TCP bind hash table entries: 32768 (order: 9, 2621440 bytes)
[ 0.422727] TCP: Hash tables configured (established 131072 bind 32768)
[ 0.422903] TCP reno registered
[ 0.423101] UDP hash table entries: 512 (order: 4, 98304 bytes)
[ 0.423357] UDP-Lite hash table entries: 512 (order: 4, 98304 bytes)
[ 0.423948] NET: Registered protocol family 1
[ 0.424370] pci 0000:01:00.0: Boot video device
[ 0.424561] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.468857] DMA-API: preallocated 32768 debug entries
[ 0.469048] DMA-API: debugging enabled by kernel config
[ 0.473757] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.473949] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.474349] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.477140] Initializing RT-Tester: OK
[ 0.477516] ====[ backtrace testing ]===========
[ 0.477685] Testing a backtrace from process context.
[ 0.477853] The following trace is a kernel self test and not a bug!
[ 0.478146] Pid: 1, comm: swapper Tainted: G W 2.6.38-rc4 #1
[ 0.478318] Call Trace:
[ 0.478495] [<ffffffff810a59c5>] ? backtrace_regression_test+0x38/0xff
[ 0.478671] [<ffffffff81480c2d>] ? mutex_unlock+0x9/0xb
[ 0.478845] [<ffffffff812bbfc0>] ? misc_register+0x10d/0x115
[ 0.479037] [<ffffffff81953134>] ? snapshot_device_init+0x0/0x12
[ 0.479212] [<ffffffff81000210>] ? do_one_initcall+0x7a/0x139
[ 0.479388] [<ffffffff8193f68e>] ? kernel_init+0x13d/0x1c1
[ 0.479561] [<ffffffff8102e9a4>] ? kernel_thread_helper+0x4/0x10
[ 0.479735] [<ffffffff81483354>] ? restore_args+0x0/0x30
[ 0.479906] [<ffffffff8193f551>] ? kernel_init+0x0/0x1c1
[ 0.480095] [<ffffffff8102e9a0>] ? kernel_thread_helper+0x0/0x10
[ 0.480266] Testing a backtrace from irq context.
[ 0.480435] The following trace is a kernel self test and not a bug!
[ 0.480612] Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.38-rc4 #1
[ 0.480784] Call Trace:
[ 0.480950] <IRQ> [<ffffffff810a597f>] ?
backtrace_test_irq_callback+0x9/0x17
[ 0.481308] [<ffffffff81068477>] ? tasklet_action+0x8b/0x11a
[ 0.481480] [<ffffffff81068e06>] ? __do_softirq+0xec/0x1e8
[ 0.481654] [<ffffffff8108e9ad>] ? trace_hardirqs_off+0xd/0xf
[ 0.481827] [<ffffffff8102ea9c>] ? call_softirq+0x1c/0x28
[ 0.481997] <EOI> [<ffffffff8102ffd2>] ? do_softirq+0x46/0x9e
[ 0.482273] [<ffffffff8106822c>] ? run_ksoftirqd+0x6f/0x119
[ 0.482445] [<ffffffff810681bd>] ? run_ksoftirqd+0x0/0x119
[ 0.482619] [<ffffffff8107ecfc>] ? kthread+0x89/0x91
[ 0.482791] [<ffffffff8102e9a4>] ? kernel_thread_helper+0x4/0x10
[ 0.482964] [<ffffffff81483354>] ? restore_args+0x0/0x30
[ 0.483150] [<ffffffff8107ec73>] ? kthread+0x0/0x91
[ 0.483321] [<ffffffff8102e9a0>] ? kernel_thread_helper+0x0/0x10
[ 0.484125] Testing a saved backtrace.
[ 0.484293] The following trace is a kernel self test and not a bug!
[ 0.484466] [<ffffffff81037759>] save_stack_trace+0x28/0x45
[ 0.484725] [<ffffffff810a5a6a>] backtrace_regression_test+0xdd/0xff
[ 0.484984] [<ffffffff81000210>] do_one_initcall+0x7a/0x139
[ 0.485277] [<ffffffff8193f68e>] kernel_init+0x13d/0x1c1
[ 0.485534] [<ffffffff8102e9a4>] kernel_thread_helper+0x4/0x10
[ 0.485793] [<ffffffffffffffff>] 0xffffffffffffffff
[ 0.486066] ====[ end of backtrace testing ]====
[ 0.486251] audit: initializing netlink socket (enabled)
[ 0.486469] type=2000 audit(1297137195.485:1): initialized
[ 0.507286] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.537804] VFS: Disk quotas dquot_6.5.2
[ 0.538334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.545757] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.546396] fuse init (API version 7.16)
[ 0.547953] msgmni has been set to 1938
[ 0.548606] SELinux: Registering netfilter hooks
[ 0.549802] io scheduler noop registered
[ 0.550493] io scheduler cfq registered (default)
[ 0.552600] intel_idle: MWAIT substates: 0x22220
[ 0.552770] intel_idle: does not run on family 6 model 15
[ 0.560948] Linux agpgart interface v0.103
[ 0.565819] loop: module loaded
[ 0.567696] ata_piix 0000:00:1f.1: version 2.13
[ 0.567882] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.568297] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.568478] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 0.568720] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.570991] scsi0 : ata_piix
[ 0.572355] scsi1 : ata_piix
[ 0.575317] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0
irq 14
[ 0.575491] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8
irq 15
[ 0.575869] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.576146] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.727031] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.728931] scsi2 : ata_piix
[ 0.737446] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 0.737798] scsi3 : ata_piix
[ 0.742753] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma
0x40a0 irq 19
[ 0.742928] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma
0x40a8 irq 19
[ 0.743677] ata1.00: configured for UDMA/66
[ 0.744171] usbcore: registered new interface driver usblcd
[ 0.744587] usbcore: registered new interface driver usbled
[ 0.745637] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.746041] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D
KCV9 PQ: 0 ANSI: 5
[ 0.746697] i8042: No controller found
[ 0.747411] mousedev: PS/2 mouse device common for all mice
[ 0.748408] lirc_dev: IR Remote Control driver registered, major 254
[ 0.748581] IR NEC protocol handler initialized
[ 0.748750] IR RC5(x) protocol handler initialized
[ 0.748920] IR RC6 protocol handler initialized
[ 0.749173] IR JVC protocol handler initialized
[ 0.749297] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.749301] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.749713] IR Sony protocol handler initialized
[ 0.749883] IR RC5 (streamzap) protocol handler initialized
[ 0.750071] IR LIRC bridge handler initialized
[ 0.750240] Linux video capture interface: v2.00
[ 0.750634] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.751466] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.753187] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07)
initialised: dm-devel@redhat.com
[ 0.753437] EDAC MC: Ver: 2.1.0 Feb 7 2011
[ 0.754147] cpuidle: using governor ladder
[ 0.754316] cpuidle: using governor menu
[ 0.759417] usbcore: registered new interface driver usbhid
[ 0.759589] usbhid: USB HID core driver
[ 0.760322] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 0.760645] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 0.760877] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 0.771965] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 0.778189] ALSA device list:
[ 0.778357] #0: HDA Intel at 0x50400000 irq 40
[ 0.778802] oprofile: using NMI interrupt.
[ 0.779960] Initializing XFRM netlink socket
[ 0.780268] NET: Registered protocol family 17
[ 0.780489] NET: Registered protocol family 15
[ 0.780658] lib80211: common routines for IEEE802.11 drivers
[ 0.780830] lib80211_crypt: registered algorithm 'NULL'
[ 0.781661] IMA: No TPM chip found, activating TPM-bypass!
[ 0.916628] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 0.916801] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.923395] ata3.01: configured for UDMA/100
[ 0.923815] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B
0081 PQ: 0 ANSI: 5
[ 0.924819] sd 2:0:1:0: [sda] 234441648 512-byte logical blocks: (120
GB/111 GiB)
[ 0.925130] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 0.925257] sd 2:0:1:0: [sda] Write Protect is off
[ 0.925260] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.925327] sd 2:0:1:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.928293] sda: sda1 sda2 sda3 sda4
[ 0.929897] sd 2:0:1:0: [sda] Attached SCSI disk
[ 0.973709] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 0.973998] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 0.978331] Freeing unused kernel memory: 2312k freed
[ 1.472027] Refined TSC clocksource calibration: 2161.249 MHz.
[ 1.472207] Switching to clocksource tsc
[ 1.555352] SELinux: 2048 avtab hash slots, 194994 rules.
[ 1.751415] SELinux: 2048 avtab hash slots, 194994 rules.
[ 1.981656] SELinux: 7 users, 15 roles, 3413 types, 144 bools, 1
sens, 1024 cats
[ 1.982095] SELinux: 81 classes, 194994 rules
[ 1.996619] SELinux: Permission read_policy in class security not
defined in policy.
[ 1.996913] SELinux: Permission audit_access in class file not
defined in policy.
[ 1.997177] SELinux: Permission audit_access in class dir not
defined in policy.
[ 1.997427] SELinux: Permission execmod in class dir not defined in
policy.
[ 1.997607] SELinux: Permission audit_access in class lnk_file not
defined in policy.
[ 1.997856] SELinux: Permission open in class lnk_file not defined
in policy.
[ 1.998111] SELinux: Permission execmod in class lnk_file not
defined in policy.
[ 1.998363] SELinux: Permission audit_access in class chr_file not
defined in policy.
[ 1.998617] SELinux: Permission audit_access in class blk_file not
defined in policy.
[ 1.998868] SELinux: Permission execmod in class blk_file not
defined in policy.
[ 1.999126] SELinux: Permission audit_access in class sock_file not
defined in policy.
[ 1.999376] SELinux: Permission execmod in class sock_file not
defined in policy.
[ 1.999629] SELinux: Permission audit_access in class fifo_file not
defined in policy.
[ 1.999881] SELinux: Permission execmod in class fifo_file not
defined in policy.
[ 2.000274] SELinux: the above unknown classes and permissions will
be denied
[ 2.000495] SELinux: Completing initialization.
[ 2.000665] SELinux: Setting up existing superblocks.
[ 2.000848] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
[ 2.001037] SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
[ 2.001299] SELinux: initialized (dev bdev, type bdev), uses
genfs_contexts
[ 2.001480] SELinux: initialized (dev proc, type proc), uses
genfs_contexts
[ 2.001664] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 2.001929] SELinux: initialized (dev sockfs, type sockfs), uses task
SIDs
[ 2.002120] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
[ 2.004184] SELinux: initialized (dev pipefs, type pipefs), uses task
SIDs
[ 2.004366] SELinux: initialized (dev anon_inodefs, type
anon_inodefs), uses genfs_contexts
[ 2.004623] SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
[ 2.004887] SELinux: initialized (dev hugetlbfs, type hugetlbfs),
uses transition SIDs
[ 2.005155] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
[ 2.005414] SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
[ 2.005743] SELinux: initialized (dev securityfs, type securityfs),
uses genfs_contexts
[ 2.006028] SELinux: initialized (dev sda3, type ext4), uses xattr
[ 2.038884] type=1403 audit(1297137197.037:2): policy loaded
auid=4294967295 ses=4294967295
[ 2.780263] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
[ 3.129218] usbcore: registered new interface driver uvcvideo
[ 3.129394] USB Video Class driver (v1.0.0)
[ 3.241817] applesmc: key=262 fan=2 temp=12 acc=1 lux=2 kbd=1
[ 3.252962] input: applesmc as
/devices/platform/applesmc.768/input/input0
[ 3.253411] Registered led device: smc::kbd_backlight
[ 3.273797] usbcore: registered new interface driver appletouch
[ 3.300484] ACPI: acpi_idle registered with cpuidle
[ 3.301215] Monitor-Mwait will be used to enter C-1 state
[ 3.301279] Monitor-Mwait will be used to enter C-2 state
[ 3.301342] Monitor-Mwait will be used to enter C-3 state
[ 3.301354] Marking TSC unstable due to TSC halts in idle
[ 3.301633] Switching to clocksource hpet
[ 3.330634] coretemp coretemp.0: TjMax is assumed as 100 C!
[ 3.331382] coretemp coretemp.1: TjMax is assumed as 100 C!
[ 3.389941] Bluetooth: Core ver 2.15
[ 3.390413] NET: Registered protocol family 31
[ 3.390583] Bluetooth: HCI device and connection manager initialized
[ 3.390755] Bluetooth: HCI socket layer initialized
[ 3.418569] Bluetooth: L2CAP ver 2.15
[ 3.418757] Bluetooth: L2CAP socket layer initialized
[ 3.428868] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.450530] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.451126] usbcore: registered new interface driver btusb
[ 3.477894] Bluetooth: RFCOMM TTY layer initialized
[ 3.478110] Bluetooth: RFCOMM socket layer initialized
[ 3.478281] Bluetooth: RFCOMM ver 1.11
[ 3.488766] Bluetooth: HCI UART driver ver 2.2
[ 3.488936] Bluetooth: HCI H4 protocol initialized
[ 3.489119] Bluetooth: HCI BCSP protocol initialized
[ 3.532660] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.535890] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 3.536114] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.536119] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.536302] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 3.543286] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.543494] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.547544] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.547659] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 3.557133] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.558664] hub 1-0:1.0: USB hub found
[ 3.558878] hub 1-0:1.0: 8 ports detected
[ 3.573911] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.574872] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 3.575116] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.575125] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.575338] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 3.580279] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 3.581868] hub 2-0:1.0: USB hub found
[ 3.582101] hub 2-0:1.0: 2 ports detected
[ 3.583239] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 3.583457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.583466] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.583678] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 3.588323] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 3.589929] hub 3-0:1.0: USB hub found
[ 3.590165] hub 3-0:1.0: 2 ports detected
[ 3.591289] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 3.591506] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.591515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.591727] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 3.600250] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 3.601890] hub 4-0:1.0: USB hub found
[ 3.602125] hub 4-0:1.0: 2 ports detected
[ 3.603237] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16
[ 3.603455] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.603464] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.603676] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 3.608382] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 3.609972] hub 5-0:1.0: USB hub found
[ 3.610208] hub 5-0:1.0: 2 ports detected
[ 3.937513] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 3.963109] usb 1-4: new high speed USB device using ehci_hcd and
address 3
[ 4.245265] udev: starting version 147
[ 4.245822] udevd (1061): /proc/1061/oom_adj is deprecated, please
use /proc/1061/oom_score_adj instead.
[ 4.489076] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 4.511945] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.512240] ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts
with ACPI region SMBI [io 0xefa0-0xefaf]
[ 4.512514] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.680236] input: Apple Computer Apple Internal Keyboard / Trackpad
as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 4.680541] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard
[Apple Computer Apple Internal Keyboard / Trackpad] on
usb-0000:00:1d.0-2/input0
[ 4.684634] appletouch: Geyser mode initialized.
[ 4.685014] input: appletouch as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input2
[ 4.691841] input: Apple Computer Apple Internal Keyboard / Trackpad
as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input3
[ 4.692167] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device
[Apple Computer Apple Internal Keyboard / Trackpad] on
usb-0000:00:1d.0-2/input2
[ 4.926772] usb 4-2: new full speed USB device using uhci_hcd and
address 2
[ 5.131498] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11
Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[ 5.274038] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 5.283977] ACPI: Lid Switch [LID0]
[ 5.284436] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.284708] ACPI: Power Button [PWRB]
[ 5.285234] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 5.285515] ACPI: Sleep Button [SLPB]
[ 5.285920] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.286241] ACPI: Power Button [PWRF]
[ 5.295492] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.295852] power_supply ADP1: uevent
[ 5.295855] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 5.295919] power_supply ADP1: prop ONLINE=1
[ 5.295947] power_supply ADP1: power_supply_changed
[ 5.295954] ACPI: AC Adapter [ADP1] (on-line)
[ 5.296275] power_supply ADP1: power_supply_changed_work
[ 5.341200] usb 5-1: new full speed USB device using uhci_hcd and
address 2
[ 5.467686] power_supply ADP1: power_supply_update_gen_leds 1
[ 5.467708] power_supply ADP1: uevent
[ 5.467722] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 5.467789] power_supply ADP1: prop ONLINE=1
[ 5.536562] usbhid 5-1:1.0: couldn't find an input interrupt endpoint
[ 5.555353] sky2: driver version 1.28
[ 5.555644] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.555840] sky2 0000:02:00.0: setting latency timer to 64
[ 5.555906] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[ 5.556285] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
[ 5.631407] sky2 0000:02:00.0: eth0: addr 00:17:f2:cb:e3:71
[ 5.764621] power_supply BAT0: uevent
[ 5.764626] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 5.788159] [drm] Initialized drm 1.1.0 20060810
[ 5.819256] power_supply BAT0: prop STATUS=Unknown
[ 5.819265] power_supply BAT0: prop PRESENT=1
[ 5.819271] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 5.819277] power_supply BAT0: prop CYCLE_COUNT=0
[ 5.819282] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 5.819287] power_supply BAT0: prop VOLTAGE_NOW=12492000
[ 5.819292] power_supply BAT0: prop POWER_NOW=0
[ 5.819298] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 5.819303] power_supply BAT0: prop ENERGY_FULL=45050000
[ 5.819308] power_supply BAT0: prop ENERGY_NOW=44490000
[ 5.819314] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 5.819319] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 5.819324] power_supply BAT0: prop SERIAL_NUMBER=
[ 5.819513] power_supply BAT0: uevent
[ 5.819516] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 5.819520] power_supply BAT0: prop STATUS=Unknown
[ 5.819526] power_supply BAT0: prop PRESENT=1
[ 5.819532] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 5.819538] power_supply BAT0: prop CYCLE_COUNT=0
[ 5.819543] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 5.819548] power_supply BAT0: prop VOLTAGE_NOW=12492000
[ 5.819553] power_supply BAT0: prop POWER_NOW=0
[ 5.819558] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 5.819563] power_supply BAT0: prop ENERGY_FULL=45050000
[ 5.819568] power_supply BAT0: prop ENERGY_NOW=44490000
[ 5.819574] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 5.819579] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 5.819584] power_supply BAT0: prop SERIAL_NUMBER=
[ 5.819703] power_supply BAT0: power_supply_changed
[ 5.819720] power_supply BAT0: power_supply_changed_work
[ 5.819725] power_supply BAT0: power_supply_update_bat_leds 0
[ 5.819728] ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.819757] ACPI: Battery Slot [BAT0] (battery present)
[ 5.820228] power_supply BAT0: uevent
[ 5.820230] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 5.820236] power_supply BAT0: prop STATUS=Unknown
[ 5.820241] power_supply BAT0: prop PRESENT=1
[ 5.820247] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 5.820252] power_supply BAT0: prop CYCLE_COUNT=0
[ 5.820258] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 5.820263] power_supply BAT0: prop VOLTAGE_NOW=12492000
[ 5.820268] power_supply BAT0: prop POWER_NOW=0
[ 5.820274] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 5.820279] power_supply BAT0: prop ENERGY_FULL=45050000
[ 5.820285] power_supply BAT0: prop ENERGY_NOW=44490000
[ 5.820290] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 5.820295] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 5.820301] power_supply BAT0: prop SERIAL_NUMBER=
[ 5.821979] power_supply BAT0: uevent
[ 5.821983] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 5.821990] power_supply BAT0: prop STATUS=Unknown
[ 5.821996] power_supply BAT0: prop PRESENT=1
[ 5.822031] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 5.822037] power_supply BAT0: prop CYCLE_COUNT=0
[ 5.822042] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 5.822047] power_supply BAT0: prop VOLTAGE_NOW=12492000
[ 5.822053] power_supply BAT0: prop POWER_NOW=0
[ 5.822058] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 5.822063] power_supply BAT0: prop ENERGY_FULL=45050000
[ 5.822069] power_supply BAT0: prop ENERGY_NOW=44490000
[ 5.822074] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 5.822080] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 5.822085] power_supply BAT0: prop SERIAL_NUMBER=
[ 5.914786] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt
64 rq 0 len 0 ret -84
[ 5.947459] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level,
low) -> IRQ 19
[ 5.954180] usb 5-1: USB disconnect, address 2
[ 5.998184] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI
v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 6.121307] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 6.121522] ath9k 0000:03:00.0: setting latency timer to 64
[ 6.252821] ath: EEPROM regdomain: 0x64
[ 6.252825] ath: EEPROM indicates we should expect a direct regpair map
[ 6.252829] ath: Country alpha2 being used: 00
[ 6.252831] ath: Regpair used: 0x64
[ 6.284403] ieee80211 phy0: Selected rate control algorithm
'ath9k_rate_control'
[ 6.285646] Registered led device: ath9k-phy0::radio
[ 6.285774] Registered led device: ath9k-phy0::assoc
[ 6.285858] Registered led device: ath9k-phy0::tx
[ 6.285943] Registered led device: ath9k-phy0::rx
[ 6.285950] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF
Rev:81 mem=0xffffc90001160000, irq=17
[ 6.500477] firewire_core: created device fw0: GUID 0019e3fffe2ad87e,
S800
[ 6.571990] [drm] radeon defaulting to kernel modesetting.
[ 6.572191] [drm] radeon kernel modesetting enabled.
[ 6.572460] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 6.572659] radeon 0000:01:00.0: setting latency timer to 64
[ 6.576452] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5).
[ 6.576707] [drm] register mmio base: 0x50300000
[ 6.576887] [drm] register mmio size: 65536
[ 6.577416] ATOM BIOS: M56P
[ 6.577626] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.577821] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 -
0x0000000007FFFFFF (128M used)
[ 6.578115] radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 -
0x0000000027FFFFFF
[ 6.578477] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.578661] [drm] Driver supports precise vblank timestamp query.
[ 6.578918] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[ 6.578937] radeon 0000:01:00.0: radeon: using MSI.
[ 6.579365] [drm] radeon: irq initialized.
[ 6.580996] [drm] Detected VRAM RAM=128M, BAR=128M
[ 6.581204] [drm] RAM width 128bits DDR
[ 6.581515] [TTM] Zone kernel: Available graphics memory: 497462 kiB.
[ 6.581689] [TTM] Initializing pool allocator.
[ 6.581906] [drm] radeon: 128M of VRAM memory ready
[ 6.582111] [drm] radeon: 512M of GTT memory ready.
[ 6.582359] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.584353] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 6.585513] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 6.585747] radeon 0000:01:00.0: WB enabled
[ 6.586226] [drm] Loading R500 Microcode
[ 6.661079] usb 5-1: new full speed USB device using uhci_hcd and
address 3
[ 7.085393] [drm] radeon: ring at 0x0000000008001000
[ 7.085622] [drm] ring test succeeded in 4 usecs
[ 7.088314] [drm] radeon: ib pool ready.
[ 7.088869] [drm] ib test succeeded in 0 usecs
[ 7.089088] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 7.091435] [drm] Radeon Display Connectors
[ 7.091621] [drm] Connector 0:
[ 7.091796] [drm] LVDS
[ 7.091974] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68
0x7e6c 0x7e6c
[ 7.092261] [drm] Encoders:
[ 7.092439] [drm] LCD1: INTERNAL_LVTM1
[ 7.092618] [drm] Connector 1:
[ 7.092794] [drm] S-video
[ 7.092972] [drm] Encoders:
[ 7.093164] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.093347] [drm] Connector 2:
[ 7.093519] [drm] DVI-I
[ 7.093691] [drm] HPD1
[ 7.093862] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48
0x7e4c 0x7e4c
[ 7.094137] [drm] Encoders:
[ 7.094308] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.094479] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 7.321307] [drm] fb mappable at 0x400C0000
[ 7.321500] [drm] vram apper at 0x40000000
[ 7.321685] [drm] size 5300224
[ 7.321867] [drm] fb depth is 24
[ 7.322065] [drm] pitch is 5888
[ 7.322632] fbcon: radeondrmfb (fb0) is primary device
[ 7.349190] Console: switching to colour frame buffer device 180x56
[ 7.353111] fb0: radeondrmfb frame buffer device
[ 7.353145] drm: registered panic notifier
[ 7.353185] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0
on minor 0
[ 7.480172] EXT4-fs (sda3): re-mounted. Opts:
errors=remount-ro,user_xattr
[ 7.632481] EXT4-fs (sda3): re-mounted. Opts:
errors=remount-ro,user_xattr
[ 7.685799] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 7.751370] Adding 390620k swap on /dev/sda4. Priority:1 extents:1
across:390620k
[ 9.332181] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.409741] nf_conntrack version 0.5.0 (7772 buckets, 31088 max)
[ 11.775249] applesmc: light sensor data length set to 6
[ 14.683492] sky2 0000:02:00.0: eth0: enabling interface
[ 20.160181] usb 2-1: new low speed USB device using uhci_hcd and
address 3
[ 20.345182] input: Mitsumi Electric Apple Optical USB Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input8
[ 20.345415] apple 0003:05AC:0304.0004: input: USB HID v1.10 Mouse
[Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.0-1/input0
[ 20.463958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.463962] Bluetooth: BNEP filters: protocol multicast
[ 20.481415] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.481418] Bluetooth: SCO socket layer initialized
[ 20.746213] wlan0: authenticate with 00:1e:2a:00:67:f0 (try 1)
[ 20.748307] wlan0: authenticated
[ 20.748364] wlan0: associate with 00:1e:2a:00:67:f0 (try 1)
[ 20.751032] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431
status=0 aid=2)
[ 20.751035] wlan0: associated
next reply other threads:[~2011-02-08 3:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-08 3:58 Justin P. Mattock [this message]
2011-02-08 14:03 ` WARNING: at kernel/lockdep.c:3151 check_flags+0x63/0x179() John W. Linville
2011-02-08 14:59 ` Justin Mattock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D50BF6D.5050408@gmail.com \
--to=justinmattock@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.