From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mohamed Thalib H Subject: Re: Does omap git have support for overo board. Date: Tue, 08 Feb 2011 18:08:33 +0530 Message-ID: <4D513949.1010905@e-consystems.com> References: <4D512702.9040708@e-consystems.com> <4D51366B.9040000@e-consystems.com> Reply-To: mohamed@e-consystems.com Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from smtp7.myhsphere.biz ([204.10.105.69]:45240 "EHLO mail9.myhsphere.biz" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751286Ab1BHMik (ORCPT ); Tue, 8 Feb 2011 07:38:40 -0500 In-Reply-To: <4D51366B.9040000@e-consystems.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Elvis Dowson , balbi@ti.com Cc: linux-omap@vger.kernel.org It works! Thanks. > Hi Elvis and balbi > > > On Tuesday 08 February 2011 05:34 PM, Elvis Dowson wrote: >> >>> Hi all, >>> >>> I have pull the latest git from >>> "http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=summary". >>> But couldn't find config file for overo . So I used >>> "omap2plus_defconfig" and made sure the overo board is selected. >>> >>> But the board didn't boot. It stopped after uncompressing kernel . >>> >>> Bytes transferred = 3011064 (2df1f8 hex) >>> ## Booting kernel from Legacy Image at 82000000 ... >>> Image Name: Linux-2.6.38-rc2-13606-g448e9a6- >>> Image Type: ARM Linux Kernel Image (uncompressed) >>> Data Size: 3011000 Bytes = 2.9 MB >>> Load Address: 80008000 >>> Entry Point: 80008000 >>> Verifying Checksum ... OK >>> Loading Kernel Image ... OK >>> OK >>> >>> Starting kernel ... >>> >>> Uncompressing Linux... done, booting the kernel.<---- Hangs after this. >>> >>> Does the mainline has the support for overo board. Or am I missing >>> something. >> You'll have to change the bootargs to reflect the change in serial >> ports from ttyS to ttyO, that's why it appears to hang. This change >> was made to linux-2.6.37 onwards. >> >> Apart from that you will have to change the /etc/inittab file as >> follows: >> >> O:2345:respawn:/sbin/getty 115200 ttyO2 >> >> Best regards, >> >> Elvis Dowson >> -- > Thanks for the help.. I will try that... >