From: Jan Kiszka <jan.kiszka@siemens.com>
To: Avi Kivity <avi@redhat.com>, Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm <kvm@vger.kernel.org>
Subject: [RESEND][PATCH] qemu-kvm: Drop vga dirty logging workarounds
Date: Mon, 14 Feb 2011 19:19:20 +0100 [thread overview]
Message-ID: <4D597228.2030404@siemens.com> (raw)
These diffs to upstream should all date back to the days qemu-kvm
supported vga dirty logging with restricted/broken kvm kernel modules.
We no longer do, so there is no need for those workarounds. Even worse
they can trigger internal bug checks these days:
BUG: kvm_dirty_pages_log_change: invalid parameters 00000000000a8000-00000000000affff
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
When the log_start/stop callbacks are upstream and about to be merged
back, you likely want this patch to be applied first. :)
hw/cirrus_vga.c | 16 ----------------
hw/vga-pci.c | 2 --
hw/vga.c | 44 ++++++++------------------------------------
3 files changed, 8 insertions(+), 54 deletions(-)
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index b58dd7e..22529c9 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -32,7 +32,6 @@
#include "console.h"
#include "vga_int.h"
#include "kvm.h"
-#include "qemu-kvm.h"
#include "loader.h"
/*
@@ -2488,7 +2487,6 @@ static CPUWriteMemoryFunc * const cirrus_linear_bitblt_write[3] = {
static void map_linear_vram(CirrusVGAState *s)
{
- vga_dirty_log_stop(&s->vga);
if (!s->vga.map_addr && s->vga.lfb_addr && s->vga.lfb_end) {
s->vga.map_addr = s->vga.lfb_addr;
s->vga.map_end = s->vga.lfb_end;
@@ -2501,16 +2499,11 @@ static void map_linear_vram(CirrusVGAState *s)
#ifndef TARGET_IA64
s->vga.lfb_vram_mapped = 0;
- cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x8000,
- (s->vga.vram_offset + s->cirrus_bank_base[0]) | IO_MEM_UNASSIGNED);
- cpu_register_physical_memory(isa_mem_base + 0xa8000, 0x8000,
- (s->vga.vram_offset + s->cirrus_bank_base[1]) | IO_MEM_UNASSIGNED);
if (!(s->cirrus_srcptr != s->cirrus_srcptr_end)
&& !((s->vga.sr[0x07] & 0x01) == 0)
&& !((s->vga.gr[0x0B] & 0x14) == 0x14)
&& !(s->vga.gr[0x0B] & 0x02)) {
- vga_dirty_log_stop(&s->vga);
cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x8000,
(s->vga.vram_offset + s->cirrus_bank_base[0]) | IO_MEM_RAM);
cpu_register_physical_memory(isa_mem_base + 0xa8000, 0x8000,
@@ -2529,7 +2522,6 @@ static void map_linear_vram(CirrusVGAState *s)
static void unmap_linear_vram(CirrusVGAState *s)
{
- vga_dirty_log_stop(&s->vga);
if (s->vga.map_addr && s->vga.lfb_addr && s->vga.lfb_end) {
s->vga.map_addr = s->vga.map_end = 0;
cpu_register_physical_memory(s->vga.lfb_addr, s->vga.vram_size,
@@ -2537,8 +2529,6 @@ static void unmap_linear_vram(CirrusVGAState *s)
}
cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x20000,
s->vga.vga_io_memory);
-
- vga_dirty_log_start(&s->vga);
}
/* Compute the memory access functions */
@@ -3073,8 +3063,6 @@ static void cirrus_pci_lfb_map(PCIDevice *d, int region_num,
{
CirrusVGAState *s = &DO_UPCAST(PCICirrusVGAState, dev, d)->cirrus_vga;
- vga_dirty_log_stop(&s->vga);
-
/* XXX: add byte swapping apertures */
cpu_register_physical_memory(addr, s->vga.vram_size,
s->cirrus_linear_io_addr);
@@ -3106,14 +3094,10 @@ static void pci_cirrus_write_config(PCIDevice *d,
PCICirrusVGAState *pvs = DO_UPCAST(PCICirrusVGAState, dev, d);
CirrusVGAState *s = &pvs->cirrus_vga;
- vga_dirty_log_stop(&s->vga);
-
pci_default_write_config(d, address, val, len);
if (s->vga.map_addr && d->io_regions[0].addr == PCI_BAR_UNMAPPED)
s->vga.map_addr = 0;
cirrus_update_memory_access(s);
-
- vga_dirty_log_start(&s->vga);
}
static int pci_cirrus_vga_initfn(PCIDevice *dev)
diff --git a/hw/vga-pci.c b/hw/vga-pci.c
index 1ef2d96..ce9ec45 100644
--- a/hw/vga-pci.c
+++ b/hw/vga-pci.c
@@ -65,11 +65,9 @@ static void pci_vga_write_config(PCIDevice *d,
PCIVGAState *pvs = container_of(d, PCIVGAState, dev);
VGACommonState *s = &pvs->vga;
- vga_dirty_log_stop(s);
pci_default_write_config(d, address, val, len);
if (s->map_addr && pvs->dev.io_regions[0].addr == -1)
s->map_addr = 0;
- vga_dirty_log_start(s);
}
static int pci_vga_initfn(PCIDevice *dev)
diff --git a/hw/vga.c b/hw/vga.c
index 3d15c15..ab339a9 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -1258,8 +1258,6 @@ static void vga_draw_text(VGACommonState *s, int full_update)
vga_draw_glyph8_func *vga_draw_glyph8;
vga_draw_glyph9_func *vga_draw_glyph9;
- vga_dirty_log_stop(s);
-
/* compute font data address (in plane 2) */
v = s->sr[3];
offset = (((v >> 4) & 1) | ((v << 1) & 6)) * 8192 * 4 + 2;
@@ -1571,65 +1569,40 @@ static void vga_sync_dirty_bitmap(VGACommonState *s)
}
#endif
- vga_dirty_log_start(s);
-}
-
-static int s1, s2, s3;
-
-static void mark_dirty(target_phys_addr_t start, target_phys_addr_t len)
-{
- target_phys_addr_t end = start + len;
-
- while (start < end) {
- cpu_physical_memory_set_dirty(cpu_get_physical_page_desc(start));
- start += TARGET_PAGE_SIZE;
- }
}
void vga_dirty_log_start(VGACommonState *s)
{
if (kvm_enabled() && s->map_addr)
- if (!s1) {
- kvm_log_start(s->map_addr, s->map_end - s->map_addr);
- mark_dirty(s->map_addr, s->map_end - s->map_addr);
- s1 = 1;
- }
+ kvm_log_start(s->map_addr, s->map_end - s->map_addr);
+
if (kvm_enabled() && s->lfb_vram_mapped) {
- if (!s2) {
- kvm_log_start(isa_mem_base + 0xa0000, 0x8000);
- kvm_log_start(isa_mem_base + 0xa8000, 0x8000);
- mark_dirty(isa_mem_base + 0xa0000, 0x10000);
- }
- s2 = 1;
+ kvm_log_start(isa_mem_base + 0xa0000, 0x8000);
+ kvm_log_start(isa_mem_base + 0xa8000, 0x8000);
}
#ifdef CONFIG_BOCHS_VBE
if (kvm_enabled() && s->vbe_mapped) {
- if (!s3) {
- kvm_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
- }
- s3 = 1;
+ kvm_log_start(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
}
#endif
}
void vga_dirty_log_stop(VGACommonState *s)
{
- if (kvm_enabled() && s->map_addr && s1)
+ if (kvm_enabled() && s->map_addr)
kvm_log_stop(s->map_addr, s->map_end - s->map_addr);
- if (kvm_enabled() && s->lfb_vram_mapped && s1) {
+ if (kvm_enabled() && s->lfb_vram_mapped) {
kvm_log_stop(isa_mem_base + 0xa0000, 0x8000);
kvm_log_stop(isa_mem_base + 0xa8000, 0x8000);
}
#ifdef CONFIG_BOCHS_VBE
- if (kvm_enabled() && s->vbe_mapped && s3) {
+ if (kvm_enabled() && s->vbe_mapped) {
kvm_log_stop(VBE_DISPI_LFB_PHYSICAL_ADDRESS, s->vram_size);
}
#endif
-
- s1 = s2 = s3 = 0;
}
void vga_dirty_log_restart(VGACommonState *s)
@@ -1867,7 +1840,6 @@ static void vga_draw_blank(VGACommonState *s, int full_update)
return;
if (s->last_scr_width <= 0 || s->last_scr_height <= 0)
return;
- vga_dirty_log_stop(s);
s->rgb_to_pixel =
rgb_to_pixel_dup_table[get_depth_index(s->ds)];
--
1.7.1
next reply other threads:[~2011-02-14 18:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-14 18:19 Jan Kiszka [this message]
2011-02-16 16:58 ` [RESEND][PATCH] qemu-kvm: Drop vga dirty logging workarounds Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D597228.2030404@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.