From: Michal Simek <monstr@monstr.eu>
To: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Subject: NFS on little-endian platform - Microblaze
Date: Wed, 16 Feb 2011 14:09:08 +0100 [thread overview]
Message-ID: <4D5BCC74.9010301@monstr.eu> (raw)
Hi All,
I am trying to understand one problem which we have found.
The problem is that I can't on Microblaze little-endian platform
mount nfs without -o nolock options. (Log below)
Selecting tcp or udp has no effect.
I am using emaclite driver and there is no problem on big endian microblaze.
ping, telnet, http, ftp, iperf, netperf work well.
That's why I have a question if there is any endian specific option for NFS?
Thanks,
Michal
~ # mount -t nfs 192.168.0.101:/tftpboot/nfs /mnt
svc: failed to register lockdv1 RPC service (errno 13).
lockd_up: makesock failed, error=-13
svc: failed to register lockdv1 RPC service (errno 13).
~ # mount -t nfs -o nolock 192.168.0.101:/tftpboot/nfs /mnt
~ # mount
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
none on /var type ramfs (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /etc/config type ramfs (rw,relatime)
none on /dev/pts type devpts (rw,relatime,mode=600)
192.168.0.101:/tftpboot/nfs on /mnt type nfs
(rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255,hard,nolock,proto=udp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.101)
~ #
~ # ps
PID USER TIME COMMAND
1 root 0:02 init
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [kworker/0:0]
5 root 0:00 [kworker/u:0]
6 root 0:00 [khelper]
7 root 0:00 [sync_supers]
8 root 0:00 [bdi-default]
9 root 0:00 [kblockd]
10 root 0:00 [rpciod]
11 root 0:00 [kworker/0:1]
12 root 0:00 [kswapd0]
13 root 0:00 [fsnotify_mark]
14 root 0:00 [aio]
15 root 0:00 [nfsiod]
16 root 0:00 [kworker/u:1]
58 root 0:00 udhcpc -R -n -p /var/run/udhcpc.eth0.pid -i eth0
62 1 0:00 /bin/portmap
64 root 0:00 /bin/inetd /etc/inetd.conf
65 root 0:01 -sh
66 root 0:00 /bin/syslogd -n
67 root 0:00 /bin/flatfsd
68 root 0:00 [kworker/0:2]
91 root 0:00 ps
~ # cat /proc/cpuinfo
CPU-Family: MicroBlaze
FPGA-Arch: spartan6
CPU-Ver: 8.00.a, little endian
CPU-MHz: 50.00
BogoMips: 24.06
HW:
Shift: yes
MSR: yes
PCMP: yes
DIV: yes
MMU: 3
MUL: v2
FPU: no
Exc: op0x0 unal ill iopb dopb zero
Icache: 16kB line length: 32B
Dcache: 16kB line length: 16B
write-through
HW-Debug: yes
PVR-USR1: 00
PVR-USR2: 00000000
Page size: 4096
~ #
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
next reply other threads:[~2011-02-16 13:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 13:09 Michal Simek [this message]
2011-02-16 13:16 ` NFS on little-endian platform - Microblaze Michal Simek
2011-02-16 13:16 ` Michal Simek
2011-02-16 13:22 ` Trond Myklebust
2011-02-16 13:53 ` Michal Simek
2011-02-16 13:53 ` Michal Simek
2011-02-16 14:04 ` Trond Myklebust
2011-02-16 14:16 ` Michal Simek
2011-02-16 14:16 ` Michal Simek
2011-02-17 12:01 ` Michal Simek
2011-02-17 12:01 ` Michal Simek
2011-02-17 12:01 ` [LTP] " Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5BCC74.9010301@monstr.eu \
--to=monstr@monstr.eu \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.