From: Marco Cavallini <koansoftware@gmail.com>
To: openembedded-devel@lists.openembedded.org
Subject: Re: [PATCH 1/2] db: Bring in 5.1.19 from poky
Date: Thu, 17 Feb 2011 17:25:35 +0100 [thread overview]
Message-ID: <4D5D4BFF.5040504@gmail.com> (raw)
In-Reply-To: <1297956266-30032-1-git-send-email-tom_rini@mentor.com>
Tom Rini ha scritto, Il 17/02/2011 16:24:
> Based on e77207ccdf15f34651a086099ed4816712e3656b in poky, bring in
> 5.1.19 (no RPATH issues when using libtool 2.2) and drop un-pinned
> 4.3.29 and 5.0.21 as this is backwards compatible.
>
> Signed-off-by: Tom Rini <tom_rini@mentor.com>
> ---
> recipes/db/db-5.0.21/cp.patch | 15 ----
> recipes/db/db-5.1.19/arm-thumb-mutex_db5.patch | 36 +++++++++
> recipes/db/db-native_4.3.29.bb | 5 -
> recipes/db/db-native_5.0.21.bb | 2 -
> recipes/db/db4-native.inc | 15 ----
> recipes/db/db4.inc | 82 -------------------
> recipes/db/db5.inc | 85 --------------------
> recipes/db/db_4.3.29.bb | 15 ----
> recipes/db/db_5.0.21.bb | 16 ----
> recipes/db/db_5.1.19.bb | 100 ++++++++++++++++++++++++
> recipes/db/files/arm-thumb-mutex.patch | 36 ---------
> recipes/db/files/db5-arm-thumb-mutex.patch | 38 ---------
> 12 files changed, 136 insertions(+), 309 deletions(-)
> delete mode 100644 recipes/db/db-5.0.21/cp.patch
> create mode 100644 recipes/db/db-5.1.19/arm-thumb-mutex_db5.patch
> delete mode 100644 recipes/db/db-native_4.3.29.bb
> delete mode 100644 recipes/db/db-native_5.0.21.bb
> delete mode 100644 recipes/db/db4-native.inc
> delete mode 100644 recipes/db/db4.inc
> delete mode 100644 recipes/db/db5.inc
> delete mode 100644 recipes/db/db_4.3.29.bb
> delete mode 100644 recipes/db/db_5.0.21.bb
> create mode 100644 recipes/db/db_5.1.19.bb
> delete mode 100644 recipes/db/files/arm-thumb-mutex.patch
> delete mode 100644 recipes/db/files/db5-arm-thumb-mutex.patch
>
> diff --git a/recipes/db/db-5.0.21/cp.patch b/recipes/db/db-5.0.21/cp.patch
> deleted file mode 100644
> index b916b06..0000000
> --- a/recipes/db/db-5.0.21/cp.patch
> +++ /dev/null
> @@ -1,15 +0,0 @@
> ----
> - Makefile.in | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> ---- dist.orig/Makefile.in
> -+++ dist/Makefile.in
> -@@ -1116,7 +1116,7 @@ install_docs:
> - ($(MKDIR) -p $(DESTDIR)$(docdir) && \
> - $(CHMOD) $(dmode) $(DESTDIR)$(docdir))
> - @cd $(DESTDIR)$(docdir) && $(RM) -r $(DOCLIST)
> -- @cd $(srcdir)/docs && $(CP) -pr $(DOCLIST) $(DESTDIR)$(docdir)/
> -+ @cd $(srcdir)/docs && $(CP) -pR $(DOCLIST) $(DESTDIR)$(docdir)/
> -
> - uninstall_docs:
> - @cd $(DESTDIR)$(docdir) && $(RM) -r $(DOCLIST)
> diff --git a/recipes/db/db-5.1.19/arm-thumb-mutex_db5.patch b/recipes/db/db-5.1.19/arm-thumb-mutex_db5.patch
> new file mode 100644
> index 0000000..37d0d93
> --- /dev/null
> +++ b/recipes/db/db-5.1.19/arm-thumb-mutex_db5.patch
> @@ -0,0 +1,36 @@
> +--- db-5.1.19/../src/dbinc/mutex_int.h.orig 2011-01-05 19:21:42.181805366 -0600
> ++++ db-5.1.19/../src/dbinc/mutex_int.h 2011-01-05 19:24:53.141853117 -0600
> +@@ -474,6 +474,25 @@
> +
> + #ifdef LOAD_ACTUAL_MUTEX_CODE
> + /* gcc/arm: 0 is clear, 1 is set. */
> ++#if defined __thumb__
> ++#define MUTEX_SET(tsl) ({ \
> ++ int __r, __p; \
> ++ __asm__ volatile( \
> ++ ".align 2\n\t" \
> ++ "bx pc\n\t" \
> ++ "nop\n\t" \
> ++ ".arm\n\t" \
> ++ "swpb %0, %2, [%3]\n\t" \
> ++ "eor %0, %0, #1\n\t" \
> ++ "orr %1, pc, #1\n\t" \
> ++ "bx %1\n\t" \
> ++ ".force_thumb" \
> ++ : "=&r" (__r), "=r" (__p) \
> ++ : "r" (1), "r" (tsl) \
> ++ ); \
> ++ __r & 1; \
> ++})
> ++#else
> + #define MUTEX_SET(tsl) ({ \
> + int __r; \
> + __asm__ volatile( \
> +@@ -484,6 +503,7 @@
> + ); \
> + __r & 1; \
> + })
> ++#endif
> +
> + #define MUTEX_UNSET(tsl) (*(volatile tsl_t *)(tsl) = 0)
> + #define MUTEX_INIT(tsl) (MUTEX_UNSET(tsl), 0)
> diff --git a/recipes/db/db-native_4.3.29.bb b/recipes/db/db-native_4.3.29.bb
> deleted file mode 100644
> index 07ac448..0000000
> --- a/recipes/db/db-native_4.3.29.bb
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -require db_${PV}.bb
> -require db4-native.inc
> -
> -SRC_URI[md5sum] = "200b9f5d74175875fcb3ee54adbf0007"
> -SRC_URI[sha256sum] = "a1fa714482f25a67a19490303a0164326ac63bd7653ae3f4664c2536b14f3337"
> diff --git a/recipes/db/db-native_5.0.21.bb b/recipes/db/db-native_5.0.21.bb
> deleted file mode 100644
> index 0e6381b..0000000
> --- a/recipes/db/db-native_5.0.21.bb
> +++ /dev/null
> @@ -1,2 +0,0 @@
> -require db_${PV}.bb
> -require db4-native.inc
> diff --git a/recipes/db/db4-native.inc b/recipes/db/db4-native.inc
> deleted file mode 100644
> index 7fd753d..0000000
> --- a/recipes/db/db4-native.inc
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -# This wrapper builds a native version of the Oracal
> -# Berkeley DB for those packages which need it (e.g.
> -# perl).
> -
> -VIRTUAL_NAME = "virtual/db-native"
> -CONFLICTS = "db3-native"
> -#PR tracks the non-native package
> -
> -inherit native
> -
> -do_package() {
> -:
> -}
> -
> -PACKAGES = ""
> diff --git a/recipes/db/db4.inc b/recipes/db/db4.inc
> deleted file mode 100644
> index 2595d81..0000000
> --- a/recipes/db/db4.inc
> +++ /dev/null
> @@ -1,82 +0,0 @@
> -# Version 4 of the Berkeley DB from Oracle
> -#
> -# At present this package only installs the DB code
> -# itself (shared libraries, .a in the dev package),
> -# documentation and headers.
> -#
> -# The headers have the same names as those as v3
> -# of the DB, only one version can be used *for dev*
> -# at once - DB3 and DB4 can both be installed on the
> -# same system at the same time if really necessary.
> -
> -
> -DESCRIPTION = "Berkeley DB v4."
> -HOMEPAGE = "http://www.oracle.com/technology/products/berkeley-db/db/index.html"
> -SECTION = "libs"
> -LICENSE = "BSD"
> -VIRTUAL_NAME ?= "virtual/db"
> -CONFLICTS = "db3"
> -
> -SRC_URI = "ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/bdb/db-${PV}.tar.gz"
> -
> -inherit autotools
> -
> -# Put virtual/db in any appropriate provider of a
> -# relational database, use it as a dependency in
> -# place of a specific db and use:
> -#
> -# PREFERRED_PROVIDER_virtual/db
> -#
> -# to select the correct db in the build (distro) .conf
> -PROVIDES += "${VIRTUAL_NAME}"
> -
> -# bitbake isn't quite clever enough to deal with db,
> -# the distribution sits in the expected directory, but all
> -# the builds must occur from a sub-directory. The following
> -# persuades bitbake to go to the right place
> -S = "${WORKDIR}/db-${PV}/dist"
> -B = "${WORKDIR}/db-${PV}/build_unix"
> -
> -# The executables go in a separate package - typically there
> -# is no need to install these unless doing real database
> -# management on the system.
> -PACKAGES += " ${PN}-bin"
> -
> -# Package contents
> -FILES_${PN} = "${libdir}/libdb-${PVM}${SOLIBSDEV}"
> -FILES_${PN}-bin = "${bindir}/*"
> -# The dev package has the .so link (as in db3) and the .a's -
> -# it is therefore incompatible (cannot be installed at the
> -# same time) as the db3 package
> -
> -EXTRA_OECONF = "${DB4_CONFIG}"
> -
> -# Override the MUTEX setting here, the POSIX library is
> -# the default - "POSIX/pthreads/library".
> -# Don't ignore the nice SWP instruction on the ARM:
> -# These enable the ARM assembler mutex code, this won't
> -# work with thumb compilation...
> -ARM_MUTEX = "--with-mutex=ARM/gcc-assembly"
> -MUTEX = ""
> -MUTEX_arm = "${ARM_MUTEX}"
> -MUTEX_armeb = "${ARM_MUTEX}"
> -EXTRA_OECONF += "${MUTEX}"
> -
> -# Cancel the site stuff - it's set for db3 and destroys the
> -# configure.
> -CONFIG_SITE = ""
> -do_configure() {
> - ( cd ${WORKDIR}/db-${PV}/dist ; gnu-configize )
> - oe_runconf
> -}
> -
> -
> -do_install_append() {
> - # The docs end up in /usr/docs - not right.
> - if test -d "${D}/${prefix}/docs"
> - then
> - mkdir -p "${D}/${datadir}"
> - test ! -d "${D}/${docdir}" || rm -rf "${D}/${docdir}"
> - mv "${D}/${prefix}/docs" "${D}/${docdir}"
> - fi
> -}
> diff --git a/recipes/db/db5.inc b/recipes/db/db5.inc
> deleted file mode 100644
> index 390dfac..0000000
> --- a/recipes/db/db5.inc
> +++ /dev/null
> @@ -1,85 +0,0 @@
> -# Version 5 of the Berkeley DB from Oracle
> -#
> -# At present this package only installs the DB code
> -# itself (shared libraries, .a in the dev package),
> -# documentation and headers.
> -#
> -# The headers have the same names as those as v3
> -# of the DB, only one version can be used *for dev*
> -# at once - DB3 and DB5 both be installed on the
> -# same system at the same time if really necessary.
> -
> -
> -DESCRIPTION = "Berkeley DB v5."
> -HOMEPAGE = "http://www.oracle.com/technology/products/berkeley-db/db/index.html"
> -SECTION = "libs"
> -LICENSE = "BSD"
> -VIRTUAL_NAME ?= "virtual/db"
> -CONFLICTS = "db3 db4"
> -
> -SRC_URI = "ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/bdb/db-${PV}.tar.gz"
> -
> -inherit autotools
> -
> -# Put virtual/db in any appropriate provider of a
> -# relational database, use it as a dependency in
> -# place of a specific db and use:
> -#
> -# PREFERRED_PROVIDER_virtual/db
> -#
> -# to select the correct db in the build (distro) .conf
> -PROVIDES += "${VIRTUAL_NAME}"
> -
> -# bitbake isn't quite clever enough to deal with db,
> -# the distribution sits in the expected directory, but all
> -# the builds must occur from a sub-directory. The following
> -# persuades bitbake to go to the right place
> -S = "${WORKDIR}/db-${PV}/dist"
> -B = "${WORKDIR}/db-${PV}/build_unix"
> -
> -# The executables go in a separate package - typically there
> -# is no need to install these unless doing real database
> -# management on the system.
> -PACKAGES += " ${PN}-bin"
> -
> -# Package contents
> -FILES_${PN} = "${libdir}/libdb-${PVM}${SOLIBSDEV}"
> -FILES_${PN}-bin = "${bindir}/*"
> -# The dev package has the .so link (as in db3) and the .a's -
> -# it is therefore incompatible (cannot be installed at the
> -# same time) as the db3 package
> -
> -EXTRA_OECONF = "${DB5_CONFIG}"
> -
> -# Override the MUTEX setting here, the POSIX library is
> -# the default - "POSIX/pthreads/library".
> -# Don't ignore the nice SWP instruction on the ARM:
> -# These enable the ARM assembler mutex code, this won't
> -# work with thumb compilation...
> -ARM_MUTEX = "--with-mutex=ARM/gcc-assembly"
> -MUTEX = ""
> -MUTEX_arm = "${ARM_MUTEX}"
> -MUTEX_armeb = "${ARM_MUTEX}"
> -EXTRA_OECONF += "${MUTEX}"
> -
> -LIBTOOL = "${HOST_SYS}-libtool --tag=CXX"
> -EXTRA_OEMAKE = "'LIBTOOL=${LIBTOOL}'"
> -
> -# Cancel the site stuff - it's set for db3 and destroys the
> -# configure.
> -CONFIG_SITE = ""
> -do_configure() {
> - ( cd ${WORKDIR}/db-${PV}/dist ; gnu-configize )
> - oe_runconf
> -}
> -
> -
> -do_install_append() {
> - # The docs end up in /usr/docs - not right.
> - if test -d "${D}/${prefix}/docs"
> - then
> - mkdir -p "${D}/${datadir}"
> - test ! -d "${D}/${docdir}" || rm -rf "${D}/${docdir}"
> - mv "${D}/${prefix}/docs" "${D}/${docdir}"
> - fi
> -}
> diff --git a/recipes/db/db_4.3.29.bb b/recipes/db/db_4.3.29.bb
> deleted file mode 100644
> index 08ca12d..0000000
> --- a/recipes/db/db_4.3.29.bb
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -PR = "r12"
> -
> -# major version number
> -PVM = "4.3"
> -
> -require db4.inc
> -
> -SRC_URI += "file://arm-thumb-mutex.patch"
> -
> -#configuration - set in local.conf to override
> -# All the --disable-* options replace --enable-smallbuild, which breaks a bunch of stuff (eg. postfix)
> -DB4_CONFIG ?= "--enable-o_direct --disable-cryptography --disable-queue --disable-replication --disable-statistics --disable-verify --enable-compat185"
> -
> -SRC_URI[md5sum] = "200b9f5d74175875fcb3ee54adbf0007"
> -SRC_URI[sha256sum] = "a1fa714482f25a67a19490303a0164326ac63bd7653ae3f4664c2536b14f3337"
> diff --git a/recipes/db/db_5.0.21.bb b/recipes/db/db_5.0.21.bb
> deleted file mode 100644
> index 1a4907f..0000000
> --- a/recipes/db/db_5.0.21.bb
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -PR = "r3"
> -
> -# major version number
> -PVM = "5.0"
> -
> -#configuration - set in local.conf to override
> -# All the --disable-* options replace --enable-smallbuild, which breaks a bunch of stuff (eg. postfix)
> -DB5_CONFIG ?= "--enable-o_direct --disable-cryptography --disable-queue --disable-replication --disable-statistics --disable-verify --enable-compat185"
> -
> -require db5.inc
> -
> -SRC_URI += "file://db5-arm-thumb-mutex.patch \
> - file://cp.patch"
> -
> -SRC_URI[md5sum] = "9a749fd2e98fe15840493ddc34cc66d8"
> -SRC_URI[sha256sum] = "061a31a962e992dd1eae5f1e3193241d497a18968e750707526d104b53ab3cc4"
> diff --git a/recipes/db/db_5.1.19.bb b/recipes/db/db_5.1.19.bb
> new file mode 100644
> index 0000000..c44b958
> --- /dev/null
> +++ b/recipes/db/db_5.1.19.bb
> @@ -0,0 +1,100 @@
> +# Version 5 of the Berkeley DB from Sleepycat
> +#
> +# At present this package only installs the DB code
> +# itself (shared libraries, .a in the dev package),
> +# documentation and headers.
> +#
> +# The headers have the same names as those as v3
> +# of the DB, only one version can be used *for dev*
> +# at once - DB3 and DB5 can both be installed on the
> +# same system at the same time if really necessary.
> +SECTION = "libs"
> +DESCRIPTION = "Berkeley DB v5."
> +HOMEPAGE = "http://www.oracle.com/technology/products/berkeley-db/db/index.html"
> +LICENSE = "BSD Sleepycat"
> +VIRTUAL_NAME ?= "virtual/db"
> +CONFLICTS = "db3"
> +PR = "r1"
> +
> +SRC_URI = "http://download.oracle.com/berkeley-db/db-${PV}.tar.gz"
> +SRC_URI += "file://arm-thumb-mutex_db5.patch"
> +
> +SRC_URI[md5sum] = "76fcbfeebfcd09ba0b4d96bfdf8d884d"
> +SRC_URI[sha256sum] = "0194d4ca9266ba1a1c0bfbc233b18bfd05f63163453c81ebcdfdc7112d5ac850"
> +
> +inherit autotools
> +
> +# Put virtual/db in any appropriate provider of a
> +# relational database, use it as a dependency in
> +# place of a specific db and use:
> +#
> +# PREFERRED_PROVIDER_virtual/db
> +#
> +# to select the correct db in the build (distro) .conf
> +PROVIDES += "${VIRTUAL_NAME}"
> +
> +# bitbake isn't quite clever enough to deal with sleepycat,
> +# the distribution sits in the expected directory, but all
> +# the builds must occur from a sub-directory. The following
> +# persuades bitbake to go to the right place
> +S = "${WORKDIR}/db-${PV}/dist"
> +B = "${WORKDIR}/db-${PV}/build_unix"
> +
> +# The executables go in a separate package - typically there
> +# is no need to install these unless doing real database
> +# management on the system.
> +PACKAGES += " ${PN}-bin"
> +
> +# Package contents
> +FILES_${PN} = "${libdir}/libdb-5*so*"
> +FILES_${PN}-bin = "${bindir}/*"
> +# The dev package has the .so link (as in db3) and the .a's -
> +# it is therefore incompatible (cannot be installed at the
> +# same time) as the db3 package
> +FILES_${PN}-dev = "${includedir} ${libdir}/*"
> +
> +#configuration - set in local.conf to override
> +# All the --disable-* options replace --enable-smallbuild, which breaks a bunch of stuff (eg. postfix)
> +DB5_CONFIG ?= "--enable-o_direct --disable-cryptography --disable-queue --disable-replication --disable-statistics --disable-verify --disable-compat185 --disable-sql"
> +
> +EXTRA_OECONF = "${DB5_CONFIG}"
> +
> +# Override the MUTEX setting here, the POSIX library is
> +# the default - "POSIX/pthreads/library".
> +# Don't ignore the nice SWP instruction on the ARM:
> +# These enable the ARM assembler mutex code, this won't
> +# work with thumb compilation...
> +ARM_MUTEX = "--with-mutex=ARM/gcc-assembly"
> +MUTEX = ""
> +MUTEX_arm = "${ARM_MUTEX}"
> +MUTEX_armeb = "${ARM_MUTEX}"
> +EXTRA_OECONF += "${MUTEX}"
> +
> +# Cancel the site stuff - it's set for db3 and destroys the
> +# configure.
> +CONFIG_SITE = ""
> +do_configure() {
> + oe_runconf
> +}
> +
> +do_install_append() {
> + mkdir -p ${D}/${includedir}/db51
> + #mv ${D}/${includedir}/db_185.h ${D}/${includedir}/db51/.
> + mv ${D}/${includedir}/db.h ${D}/${includedir}/db51/.
> + mv ${D}/${includedir}/db_cxx.h ${D}/${includedir}/db51/.
> + #mv ${D}/${includedir}/dbsql.h ${D}/${includedir}/db51/.
> + #ln -s db51/db_185.h ${D}/${includedir}/db_185.h
> + ln -s db51/db.h ${D}/${includedir}/db.h
> + ln -s db51/db_cxx.h ${D}/${includedir}/db_cxx.h
> + #ln -s db51/dbsql.h ${D}/${includedir}/dbsql.h
> +
> + # The docs end up in /usr/docs - not right.
> + if test -d "${D}/${prefix}/docs"
> + then
> + mkdir -p "${D}/${datadir}"
> + test ! -d "${D}/${docdir}" || rm -rf "${D}/${docdir}"
> + mv "${D}/${prefix}/docs" "${D}/${docdir}"
> + fi
> +}
> +
> +BBCLASSEXTEND = "native nativesdk"
> diff --git a/recipes/db/files/arm-thumb-mutex.patch b/recipes/db/files/arm-thumb-mutex.patch
> deleted file mode 100644
> index acd446f..0000000
> --- a/recipes/db/files/arm-thumb-mutex.patch
> +++ /dev/null
> @@ -1,36 +0,0 @@
> ---- db-4.3.29-dist/../dbinc/mutex.h 2005-11-15 07:33:27.761042518 -0800
> -+++ db-4.3.29-dist/../dbinc/mutex.h 2005-11-15 07:55:24.823920060 -0800
> -@@ -470,6 +470,25 @@
> - #ifdef LOAD_ACTUAL_MUTEX_CODE
> - #define MUTEX_SET_TEST 1 /* gcc/arm: 0 is clear, 1 is set. */
> -
> -+#if defined __thumb__
> -+#define MUTEX_SET(tsl) ({ \
> -+ int __r, __p; \
> -+ asm volatile( \
> -+ ".align 2\n\t" \
> -+ "bx pc\n\t" \
> -+ "nop\n\t" \
> -+ ".arm\n\t" \
> -+ "swpb %0, %2, [%3]\n\t" \
> -+ "eor %0, %0, #1\n\t" \
> -+ "orr %1, pc, #1\n\t" \
> -+ "bx %1\n\t" \
> -+ ".force_thumb" \
> -+ : "=&r" (__r), "=r" (__p) \
> -+ : "r" (1), "r" (tsl) \
> -+ ); \
> -+ __r & 1; \
> -+})
> -+#else
> - #define MUTEX_SET(tsl) ({ \
> - int __r; \
> - asm volatile( \
> -@@ -480,6 +499,7 @@
> - ); \
> - __r & 1; \
> - })
> -+#endif
> -
> - #define MUTEX_UNSET(tsl) (*(volatile tsl_t *)(tsl) = 0)
> - #define MUTEX_INIT(tsl) MUTEX_UNSET(tsl)
> diff --git a/recipes/db/files/db5-arm-thumb-mutex.patch b/recipes/db/files/db5-arm-thumb-mutex.patch
> deleted file mode 100644
> index 51b8882..0000000
> --- a/recipes/db/files/db5-arm-thumb-mutex.patch
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -Index: db-5.0.21/../dbinc/mutex_int.h
> -===================================================================
> ---- db-5.0.21.orig/../dbinc/mutex_int.h 2010-03-30 10:36:09.000000000 -0700
> -+++ db-5.0.21/../dbinc/mutex_int.h 2010-05-22 12:07:38.281286337 -0700
> -@@ -474,6 +474,25 @@ typedef unsigned char tsl_t;
> -
> - #ifdef LOAD_ACTUAL_MUTEX_CODE
> - /* gcc/arm: 0 is clear, 1 is set. */
> -+#if defined __thumb__
> -+#define MUTEX_SET(tsl) ({ \
> -+ int __r, __p; \
> -+ asm volatile( \
> -+ ".align 2\n\t" \
> -+ "bx pc\n\t" \
> -+ "nop\n\t" \
> -+ ".arm\n\t" \
> -+ "swpb %0, %2, [%3]\n\t" \
> -+ "eor %0, %0, #1\n\t" \
> -+ "orr %1, pc, #1\n\t" \
> -+ "bx %1\n\t" \
> -+ ".force_thumb" \
> -+ : "=&r" (__r), "=r" (__p) \
> -+ : "r" (1), "r" (tsl) \
> -+ ); \
> -+ __r & 1; \
> -+})
> -+#else
> - #define MUTEX_SET(tsl) ({ \
> - int __r; \
> - __asm__ volatile( \
> -@@ -484,6 +503,7 @@ typedef unsigned char tsl_t;
> - ); \
> - __r & 1; \
> - })
> -+#endif
> -
> - #define MUTEX_UNSET(tsl) (*(volatile tsl_t *)(tsl) = 0)
> - #define MUTEX_INIT(tsl) (MUTEX_UNSET(tsl), 0)
ACK
Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://www.KoanSoftware.com
http://www.KaeilOS.com
prev parent reply other threads:[~2011-02-17 16:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-17 15:24 [PATCH 1/2] db: Bring in 5.1.19 from poky Tom Rini
2011-02-17 15:24 ` [PATCH 2/2] gettext: Pass --disable-rpath on target Tom Rini
2011-02-17 16:25 ` Marco Cavallini
2011-02-17 16:25 ` Marco Cavallini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5D4BFF.5040504@gmail.com \
--to=koansoftware@gmail.com \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.