* autobuilders in flux today.
@ 2011-02-16 19:19 Elizabeth Flanagan
2011-02-18 5:11 ` [poky] " Cui, Dexuan
0 siblings, 1 reply; 8+ messages in thread
From: Elizabeth Flanagan @ 2011-02-16 19:19 UTC (permalink / raw)
To: yocto@yoctoproject.org, poky@yoctoproject.org
I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
keep everyone informed.
All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
Thanks
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: autobuilders in flux today.
2011-02-16 19:19 autobuilders in flux today Elizabeth Flanagan
@ 2011-02-18 5:11 ` Cui, Dexuan
0 siblings, 0 replies; 8+ messages in thread
From: Cui, Dexuan @ 2011-02-18 5:11 UTC (permalink / raw)
To: Flanagan, Elizabeth, yocto@yoctoproject.org,
poky@yoctoproject.org
Cc: Wold, Saul
Hi Beth,
Looks autobuilder is still unstable?
I found the following issues.
Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
Could you please have a look?
Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
Building qemux86-64 meta-toolchain-sdk failed:
/home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
/home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
Thanks,
-- Dexuan
-----Original Message-----
From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
Sent: 2011年2月17日 3:20
To: yocto@yoctoproject.org; poky@yoctoproject.org
Subject: [poky] autobuilders in flux today.
I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
keep everyone informed.
All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
Thanks
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
_______________________________________________
poky mailing list
poky@yoctoproject.org
https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [poky] autobuilders in flux today.
@ 2011-02-18 5:11 ` Cui, Dexuan
0 siblings, 0 replies; 8+ messages in thread
From: Cui, Dexuan @ 2011-02-18 5:11 UTC (permalink / raw)
To: Flanagan, Elizabeth, yocto@yoctoproject.org,
poky@yoctoproject.org
Cc: Wold, Saul
Hi Beth,
Looks autobuilder is still unstable?
I found the following issues.
Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
Could you please have a look?
Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
Building qemux86-64 meta-toolchain-sdk failed:
/home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
/home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
Thanks,
-- Dexuan
-----Original Message-----
From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
Sent: 2011年2月17日 3:20
To: yocto@yoctoproject.org; poky@yoctoproject.org
Subject: [poky] autobuilders in flux today.
I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
keep everyone informed.
All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
Thanks
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
_______________________________________________
poky mailing list
poky@yoctoproject.org
https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: autobuilders in flux today.
2011-02-18 5:11 ` [poky] " Cui, Dexuan
@ 2011-02-18 6:56 ` Elizabeth Flanagan
-1 siblings, 0 replies; 8+ messages in thread
From: Elizabeth Flanagan @ 2011-02-18 6:56 UTC (permalink / raw)
To: Cui, Dexuan; +Cc: yocto@yoctoproject.org, poky@yoctoproject.org, Wold, Saul
Yes, there was some issues with the autobuilder due to some old processes. A quick reset of the autobuilder service this
afternoon and the current build is mostly green with the exception of one sanity test failure.
-b
On 02/17/2011 09:11 PM, Cui, Dexuan wrote:
> Hi Beth,
> Looks autobuilder is still unstable?
> I found the following issues.
> Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
> Could you please have a look?
>
> Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
>
>
> Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
>
> Building qemux86-64 meta-toolchain-sdk failed:
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
>
>
> Thanks,
> -- Dexuan
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
> Sent: 2011年2月17日 3:20
> To: yocto@yoctoproject.org; poky@yoctoproject.org
> Subject: [poky] autobuilders in flux today.
>
> I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
> an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
> keep everyone informed.
>
> All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
>
> Thanks
>
>
> ------------------
> Elizabeth Flanagan
> Yocto Project
> Release Engineer
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [poky] autobuilders in flux today.
@ 2011-02-18 6:56 ` Elizabeth Flanagan
0 siblings, 0 replies; 8+ messages in thread
From: Elizabeth Flanagan @ 2011-02-18 6:56 UTC (permalink / raw)
To: Cui, Dexuan; +Cc: yocto@yoctoproject.org, poky@yoctoproject.org, Wold, Saul
Yes, there was some issues with the autobuilder due to some old processes. A quick reset of the autobuilder service this
afternoon and the current build is mostly green with the exception of one sanity test failure.
-b
On 02/17/2011 09:11 PM, Cui, Dexuan wrote:
> Hi Beth,
> Looks autobuilder is still unstable?
> I found the following issues.
> Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
> Could you please have a look?
>
> Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
>
>
> Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
>
> Building qemux86-64 meta-toolchain-sdk failed:
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
>
>
> Thanks,
> -- Dexuan
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
> Sent: 2011年2月17日 3:20
> To: yocto@yoctoproject.org; poky@yoctoproject.org
> Subject: [poky] autobuilders in flux today.
>
> I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
> an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
> keep everyone informed.
>
> All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
>
> Thanks
>
>
> ------------------
> Elizabeth Flanagan
> Yocto Project
> Release Engineer
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: autobuilders in flux today.
2011-02-18 6:56 ` [poky] " Elizabeth Flanagan
@ 2011-02-21 6:38 ` Cui, Dexuan
-1 siblings, 0 replies; 8+ messages in thread
From: Cui, Dexuan @ 2011-02-21 6:38 UTC (permalink / raw)
To: Flanagan, Elizabeth
Cc: yocto@yoctoproject.org, poky@yoctoproject.org, Wold, Saul
Hi Beth,
Today I found the following issues on autobuilders again. Are they autobuilder's configure issue?
Copying IPK feed output failed: http://autobuilder.pokylinux.org:8010/builders/nightly-external/builds/37/steps/shell_36/logs/stdio
Copying RPM feed output failed -- Error: tmp/deploy/rpm does not exist, cannot copy!: http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
Generating Poky release tarball failed -- fatal: Not a git repository (or any of the parent directories): .git: http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
Thanks,
-- Dexuan
-----Original Message-----
From: Flanagan, Elizabeth
Sent: 2011年2月18日 14:56
To: Cui, Dexuan
Cc: yocto@yoctoproject.org; poky@yoctoproject.org; Wold, Saul
Subject: Re: [poky] autobuilders in flux today.
Yes, there was some issues with the autobuilder due to some old processes. A quick reset of the autobuilder service this
afternoon and the current build is mostly green with the exception of one sanity test failure.
-b
On 02/17/2011 09:11 PM, Cui, Dexuan wrote:
> Hi Beth,
> Looks autobuilder is still unstable?
> I found the following issues.
> Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
> Could you please have a look?
>
> Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
>
>
> Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
>
> Building qemux86-64 meta-toolchain-sdk failed:
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
>
>
> Thanks,
> -- Dexuan
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
> Sent: 2011年2月17日 3:20
> To: yocto@yoctoproject.org; poky@yoctoproject.org
> Subject: [poky] autobuilders in flux today.
>
> I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
> an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
> keep everyone informed.
>
> All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
>
> Thanks
>
>
> ------------------
> Elizabeth Flanagan
> Yocto Project
> Release Engineer
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [poky] autobuilders in flux today.
@ 2011-02-21 6:38 ` Cui, Dexuan
0 siblings, 0 replies; 8+ messages in thread
From: Cui, Dexuan @ 2011-02-21 6:38 UTC (permalink / raw)
To: Flanagan, Elizabeth
Cc: yocto@yoctoproject.org, poky@yoctoproject.org, Wold, Saul
Hi Beth,
Today I found the following issues on autobuilders again. Are they autobuilder's configure issue?
Copying IPK feed output failed: http://autobuilder.pokylinux.org:8010/builders/nightly-external/builds/37/steps/shell_36/logs/stdio
Copying RPM feed output failed -- Error: tmp/deploy/rpm does not exist, cannot copy!: http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
Generating Poky release tarball failed -- fatal: Not a git repository (or any of the parent directories): .git: http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
Thanks,
-- Dexuan
-----Original Message-----
From: Flanagan, Elizabeth
Sent: 2011年2月18日 14:56
To: Cui, Dexuan
Cc: yocto@yoctoproject.org; poky@yoctoproject.org; Wold, Saul
Subject: Re: [poky] autobuilders in flux today.
Yes, there was some issues with the autobuilder due to some old processes. A quick reset of the autobuilder service this
afternoon and the current build is mostly green with the exception of one sanity test failure.
-b
On 02/17/2011 09:11 PM, Cui, Dexuan wrote:
> Hi Beth,
> Looks autobuilder is still unstable?
> I found the following issues.
> Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
> Could you please have a look?
>
> Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
>
>
> Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
>
> Building qemux86-64 meta-toolchain-sdk failed:
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
>
>
> Thanks,
> -- Dexuan
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
> Sent: 2011年2月17日 3:20
> To: yocto@yoctoproject.org; poky@yoctoproject.org
> Subject: [poky] autobuilders in flux today.
>
> I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
> an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
> keep everyone informed.
>
> All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
>
> Thanks
>
>
> ------------------
> Elizabeth Flanagan
> Yocto Project
> Release Engineer
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [poky] autobuilders in flux today.
2011-02-21 6:38 ` [poky] " Cui, Dexuan
(?)
@ 2011-02-21 6:49 ` Cui, Dexuan
-1 siblings, 0 replies; 8+ messages in thread
From: Cui, Dexuan @ 2011-02-21 6:49 UTC (permalink / raw)
To: Flanagan, Elizabeth; +Cc: yocto@yoctoproject.org, Wold, Saul
1 more issue that blocks meta-toolchain-sdk for many targets:
Commands are meta-toolchain-sdk -k
Changed to /builds2/pokybuilds/nightly-internal/build
/home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
/home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_16/logs/stdio
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_13/logs/stdio
http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_11/logs/stdio
Thanks,
-- Dexuan
-----Original Message-----
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Cui, Dexuan
Sent: 2011年2月21日 14:39
To: Flanagan, Elizabeth
Cc: yocto@yoctoproject.org; poky@yoctoproject.org; Wold, Saul
Subject: Re: [yocto] [poky] autobuilders in flux today.
Hi Beth,
Today I found the following issues on autobuilders again. Are they autobuilder's configure issue?
Copying IPK feed output failed: http://autobuilder.pokylinux.org:8010/builders/nightly-external/builds/37/steps/shell_36/logs/stdio
Copying RPM feed output failed -- Error: tmp/deploy/rpm does not exist, cannot copy!: http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
Generating Poky release tarball failed -- fatal: Not a git repository (or any of the parent directories): .git: http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
Thanks,
-- Dexuan
-----Original Message-----
From: Flanagan, Elizabeth
Sent: 2011年2月18日 14:56
To: Cui, Dexuan
Cc: yocto@yoctoproject.org; poky@yoctoproject.org; Wold, Saul
Subject: Re: [poky] autobuilders in flux today.
Yes, there was some issues with the autobuilder due to some old processes. A quick reset of the autobuilder service this
afternoon and the current build is mostly green with the exception of one sanity test failure.
-b
On 02/17/2011 09:11 PM, Cui, Dexuan wrote:
> Hi Beth,
> Looks autobuilder is still unstable?
> I found the following issues.
> Actually due to the 3rd failure(./poky-init-build-env: No such file or directory), almost all the builds failed...
> Could you please have a look?
>
> Copying RPM feed output failed: Error: tmp/deploy/rpm does not exist, cannot copy!
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_21/logs/stdio
>
>
> Generating Poky release tarball failed: fatal: Not a git repository (or any of the parent directories): .git
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_19/logs/stdio
>
> Building qemux86-64 meta-toolchain-sdk failed:
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 35: ./poky-init-build-env: No such file or directory
> /home/pokybuild/poky-autobuilder/scripts/poky-autobuild: line 80: bitbake: command not found
> http://autobuilder.pokylinux.org:8010/builders/nightly-internal/builds/54/steps/shell_17/logs/stdio
>
>
> Thanks,
> -- Dexuan
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Elizabeth Flanagan
> Sent: 2011年2月17日 3:20
> To: yocto@yoctoproject.org; poky@yoctoproject.org
> Subject: [poky] autobuilders in flux today.
>
> I came in this morning to 140 zombies and a build that was choking on builder2. I'm rebooting the server right now. Just
> an FYI, this is a relatively recent development (last night there were 17 zombies). Not sure what is going on but I'll
> keep everyone informed.
>
> All that said, the autobuilders will be in flux today while I bring builder3 online. Please don't kick off anything vital.
>
> Thanks
>
>
> ------------------
> Elizabeth Flanagan
> Yocto Project
> Release Engineer
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
------------------
Elizabeth Flanagan
Yocto Project
Release Engineer
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-02-21 6:50 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-16 19:19 autobuilders in flux today Elizabeth Flanagan
2011-02-18 5:11 ` Cui, Dexuan
2011-02-18 5:11 ` [poky] " Cui, Dexuan
2011-02-18 6:56 ` Elizabeth Flanagan
2011-02-18 6:56 ` [poky] " Elizabeth Flanagan
2011-02-21 6:38 ` Cui, Dexuan
2011-02-21 6:38 ` [poky] " Cui, Dexuan
2011-02-21 6:49 ` Cui, Dexuan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.