From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?=C9ric_Piel?= Date: Sun, 20 Feb 2011 18:16:24 +0000 Subject: Re: [lm-sensors] [PATCH 0/4] Move lis3lv02d and hp_accel out of Message-Id: <4D615A78.3090206@tremplin-utc.net> List-Id: References: <20110219141219.47aba4f8@endymion.delvare> In-Reply-To: <20110219141219.47aba4f8@endymion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Op 19-02-11 14:12, Jean Delvare schreef: > Hi all, > > Here is a patch set moving lis3lv02d and hp_accel out of drivers/hwmon. > hp_accel goes where it belongs, i.e. drivers/platform/x86 (next to > hdaps.) For lis3lv02d, I would have preferred a more specific home, but > none seems to be suitable at the moment, so I went for drivers/misc. We > might revisit this later. > > [PATCH 1/4] Let Kconfig handle lis3lv02d dependencies > [PATCH 2/4] Move hp_accel to drivers/platform/x86 > [PATCH 3/4] Move lis3lv02d drivers to drivers/misc > [PATCH 4/4] hp_accel: Fix driver name > > As with every patch moving files around, the patches look very large > but most of them can be ignored, all you really have to look at are the > Kconfig and Makefile changes. > > Note that I don't have supported hardware so I wasn't able to test the > patches. So I would welcome testing as much as review. > Hello, I'm completely fine with the move (it was in hwmon only because in the=20 first place there were other accelerometers there). So here is my: Acked-by: =C9ric Piel I'll try to test the changes tomorrow (on an HP notebook), to confirm. BTW, why do hp_accel has to be in a different directory than the rest?=20 To me it's just a different interface to the chip: ACPI/HP, instead of=20 SPI or I=B2C. See you, Eric _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors