From mboxrd@z Thu Jan 1 00:00:00 1970 From: wangdi Date: Wed, 23 Feb 2011 11:02:08 -0800 Subject: [Lustre-devel] problem with CMD In-Reply-To: <8CDA124706596DF-23EC-3368C@webmail-d045.sysops.aol.com> References: <8CDA124706596DF-23EC-3368C@webmail-d045.sysops.aol.com> Message-ID: <4D6559B0.1040503@whamcloud.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lustre-devel@lists.lustre.org On 02/22/2011 07:54 PM, Ravi wrote: > > > Hello All > > I have been working on lustre for 3-4 months and now want to move > CMD(clustered meta data).i am using lustre-2.0.0.I was not able to > get any links or documents which could help me install it.I came > across some documents one which asked me to format the one MDT(drive) > and mount it on 2 MDS and the MDS takes care of notifying the > client.Another document said i should format 2 (separate )drives as > MDT and then mount it on the 2 MDS.Also i read that CMD has a master > MDS and Slave MDS.Do we have to configure it differently ? Also i > could get some rpms for patched kernel from lustre download site > for lustre-ldiskfs-3.2.0-2.6.18_164.11.1.el5_lustre.2.0.0.1.x86_64.rpm > lustre-modules-2.0.0.1-2.6.18_164.11.1.el5_lustre.2.0.0.1.x86_64.rpm, kernel-2.6.18-164.11.1.el5_lustre.2.0.0.1.x86_64.rpm.But > i am not sure if i can use the same patched kernel i was using for > Single MDS setup. I am not exactly able to figure out how this should > be done.Any help would be appreciated.Thanks CMD is not supported in lustre-2.0.0. Thanks WangDi > > > > Raviprakash Darbha > > > _______________________________________________ > Lustre-devel mailing list > Lustre-devel at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-devel -------------- next part -------------- An HTML attachment was scrubbed... URL: