From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4D694B17.2010506@gmail.com> Date: Sat, 26 Feb 2011 19:48:55 +0100 From: Till Kamppeter MIME-Version: 1.0 References: <201102252000.59079.hvengel@gmail.com> <4D68F9F7.5090702@gmail.com> <201102260816.01720.hvengel@gmail.com> In-Reply-To: <201102260816.01720.hvengel@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Printing-architecture] Qt only CPD. List-Id: Printing architecture under linux List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: "Hal V. Engel" Cc: Printing-architecture@lists.linux-foundation.org, Lars Uebernickel On 02/26/2011 05:16 PM, Hal V. Engel wrote: > I already have the test app using Qt calls only at this point since it > only took about 1/2 hour to do. Since I have not used BZR before I will > spend some time getting a handle on what I need to do and then commit > the changes after doing a little clean up on the code. I will also see > what I can do to clean up the build over the next day or two and then > commit those changes. A short introduction for using BZR you find here: https://www.linuxfoundation.org/collaborate/workgroups/openprinting/database/instructionsforcontributors > Is there a todo document/list some place that covers what work is needed > for the Qt CPD? Or is this something that we need to work out as things > are getting underway? Here you find the TODO list of the whole project: https://www.linuxfoundation.org/collaborate/workgroups/openprinting/plan-completion-common-printing-dialog Till