From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Jones Date: Mon, 28 Feb 2011 09:31:02 -0800 Subject: [Lustre-devel] problem with CMD In-Reply-To: <8CDA57DF73AD243-2060-146E8@angweb-usd022.sysops.aol.com> References: <8CDA124706596DF-23EC-3368C@webmail-d045.sysops.aol.com><4D6559B0.1040503@whamcloud.com><8CDA453BDAF3CCD-1BB0-24B96@webmail-d139.sysops.aol.com> <8CDA57D917C4CC9-2060-145E7@angweb-usd022.sysops.aol.com> <8CDA57DF73AD243-2060-146E8@angweb-usd022.sysops.aol.com> Message-ID: <4D6BDBD6.30602@whamcloud.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lustre-devel@lists.lustre.org Ravi No, Lustre does not presently support CMD. It is planned for a future (as yet TBD) 2.x release Regards Peter On 11-02-28 8:44 AM, Ravi wrote: > Sry the link is > http://wiki.lustre.org/index.php/Clustered_Metadata > > > > -----Original Message----- > From: Ravi > To: tsrjzq ; Lustre-devel > > Sent: Mon, Feb 28, 2011 6:42 am > Subject: Re: [Lustre-devel] problem with CMD > > Hey > I found some info abt CMD on lustre site .Could anyone please comment > on this .. > > Thanks > > > > -----Original Message----- > From: Larry > > To: Ravi > > Sent: Sun, Feb 27, 2011 6:26 pm > Subject: Re: [Lustre-devel] problem with CMD > > seems that none of lustre supports CMD > > 2011/2/27 Ravi>: > > Hey > > Thanks for the reply.I want to confirm if any lustre is actually supporting > > CMD ??Could you pls provide me some links if there are any ??Thanks .. > > > > > > > > -----Original Message----- > > From: wangdi> > > To: lustre-devel> > > Sent: Wed, Feb 23, 2011 1:16 pm > > Subject: Re: [Lustre-devel] problem with CMD > > > > On 02/22/2011 07:54 PM, Ravi wrote: > > > > Hello All > > I have been working on lustre for 3-4 months and now want to move > > CMD(clustered meta data).i am using lustre-2.0.0.I was not able to get any > > links or documents which could help me install it.I came across some > > documents one which asked me to format the one MDT(drive) and mount it on 2 > > MDS and the MDS takes care of notifying the client.Another document said i > > should format 2 (separate )drives as MDT and then mount it on the 2 MDS.Also > > i read that CMD has a master MDS and Slave MDS.Do we have to configure it > > differently ? Also i could get some rpms for patched kernel from lustre > > download site > > for lustre-ldiskfs-3.2.0-2.6.18_164.11.1.el5_lustre.2.0.0.1.x86_64.rpm > > lustre-modules-2.0.0.1-2.6.18_164.11.1.el5_lustre.2.0.0.1.x86_64.rpm, kernel-2.6.18-164.11.1.el5_lustre.2.0.0.1.x86_64.rpm.But > > i am not sure if i can use the same patched kernel i was using for Single > > MDS setup. I am not exactly able to figure out how this should be done.Any > > help would be appreciated.Thanks > > > > CMD is not supported in lustre-2.0.0. > > > > Thanks > > WangDi > > > > > > > > Raviprakash Darbha > > > > _______________________________________________ > > Lustre-devel mailing list > > Lustre-devel at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-devel > > > > _______________________________________________ > > Lustre-devel mailing list > > Lustre-devel at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-devel > > > > > > _______________________________________________ > > Lustre-devel mailing list > > Lustre-devel at lists.lustre.org > > http://lists.lustre.org/mailman/listinfo/lustre-devel > > > > > > _______________________________________________ > Lustre-devel mailing list > Lustre-devel at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-devel > > > _______________________________________________ > Lustre-devel mailing list > Lustre-devel at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-devel -- Peter Jones Whamcloud, Inc. www.whamcloud.com -------------- next part -------------- An HTML attachment was scrubbed... URL: