From: Nathan Harris <nharris@eoimaging.com>
To: Khem Raj <raj.khem@gmail.com>
Cc: openembedded-devel@lists.openembedded.org
Subject: Re: QA issues with libvmime
Date: Tue, 01 Mar 2011 14:43:09 -0500 [thread overview]
Message-ID: <4D6D4C4D.4080005@eoimaging.com> (raw)
In-Reply-To: <AANLkTimaBPnuvU9Wer1Fz2gBmS03_EOO4DqfSgvSM_9Y@mail.gmail.com>
On 3/1/2011 1:59 PM, Khem Raj wrote:
> On Tue, Mar 1, 2011 at 5:51 AM, Nathan Harris<nharris@eoimaging.com> wrote:
>> On 2/28/2011 5:24 PM, Khem Raj wrote:
>>> On Mon, Feb 28, 2011 at 12:48 PM, Nathan Harris<nharris@eoimaging.com>
>>> wrote:
>>>> Unfortunately, when I added pkgconfg to my inherit list, cleaned the
>>>> package
>>>> and then re-bitbaked, I still get the same error message. I verified
>>>> that
>>>> vmime.pc is removed during the clean process (along with the other temp
>>>> files).
>>> Is it also removed from sysroot ?
>> Yes it's removed from sysroot too. I tried to build again. Did a updatedb
>> and locate on vmime.pc. I can see it in a few places (including the sysroot
>> directory). I do the "bitbake -c clean libvmime", updatedb, and locate does
>> not find anything. I searched manually and can not find vmime.pc. The
>> recipe still fails. It's frustrating since it seems like the pkgconfig
>> should have fixed it. At one point, I was trying to build with autotools
>> and gave up that route. Maybe there is another file out there confusing the
>> issue? Here's the entire output of bitbake and my new recipe.
>>
>>
>> The recipe:
>>
>> DESCRIPTION = "VMime is a free mail library for C++"
>> HOMEPAGE = "http://www.vmime.org/"
>> DEPENDS = "libgsasl gnutls"
>> PR = "r1"
>>
>> SRC_URI = "${SOURCEFORGE_MIRROR}/vmime/${PN}-${PV}.tar.bz2"
>> SRC_URI[md5sum] = "d5b6de44f7f9ca0e4cefe597d1905605"
>> SRC_URI[sha256sum] =
>> "3b66cb76d9bc7da80ef1f271cc29d3a183b5ff8b560ef60e85ff006bffb4d1ae"
>>
>> SRC_URI += "file://sendmail_disable.patch"
>>
>> inherit scons pkgconfig
> I looked into the sources of this library and it uses autotools so you
> need to inherit autotools as well.
VMime can be compiled with either scons or autotools (at least under
x86). I gave up trying to get autotools to work, since I got much
further with scons. I could not get past the configure step with
autotools. I didn't know you could inherit both scons and autotools.
Here's the output with "inherit scons pkgconfig autotools":
NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it
to increase performance.
NOTE: Handling BitBake files: - (7293/7293) [100 %]
Parsing of 7293 .bb files complete (6862 cached, 431 parsed). 7687
targets, 312 skipped, 2 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.10.2"
METADATA_BRANCH = "<unknown>"
METADATA_REVISION = "12"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "overo"
DISTRO = "angstrom"
DISTRO_VERSION = "2010.7-test-20110301"
TARGET_FPU = "hard"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 1 of 1 (ID: 0,
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_clean)
NOTE: package libvmime-0.9.1-r1: task do_clean: Started
NOTE: removing
../../../tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1
NOTE: removing
../../../tmp/stamps/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1.*
NOTE: package libvmime-0.9.1-r1: task do_clean: Succeeded
NOTE: Tasks Summary: Attempted 1 tasks of which 0 didn't need to be
rerun and 0 failed.
ppeimany@Dell-T3400:~/overo-oe/org.openembedded.dev/recipes/libvmime$
bitbake libvmime
NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it
to increase performance.
NOTE: Handling BitBake files: - (7293/7293) [100 %]
Parsing of 7293 .bb files complete (6863 cached, 430 parsed). 7687
targets, 312 skipped, 2 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.10.2"
METADATA_BRANCH = "<unknown>"
METADATA_REVISION = "12"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "overo"
DISTRO = "angstrom"
DISTRO_VERSION = "2010.7-test-20110301"
TARGET_FPU = "hard"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 509 of 818 (ID: 10,
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_setscene)
NOTE: package libvmime-0.9.1-r1: task do_setscene: Started
NOTE: package libvmime-0.9.1-r1: task do_setscene: Succeeded
NOTE: Running task 510 of 818 (ID: 8,
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_fetch)
NOTE: package libvmime-0.9.1-r1: task do_fetch: Started
NOTE: package libvmime-0.9.1-r1: task do_fetch: Succeeded
NOTE: Running task 515 of 818 (ID: 0,
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_unpack)
NOTE: package libvmime-0.9.1-r1: task do_unpack: Started
NOTE: Unpacking ../../../sources/libvmime-0.9.1.tar.bz2 to
../../../tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/
NOTE: package libvmime-0.9.1-r1: task do_unpack: Succeeded
NOTE: Running task 539 of 818 (ID: 1,
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_patch)
NOTE: package libvmime-0.9.1-r1: task do_patch: Started
NOTE: Applying patch 'sendmail_disable.patch' (files/sendmail_disable.patch)
NOTE: package libvmime-0.9.1-r1: task do_patch: Succeeded
NOTE: Running task 540 of 818 (ID: 11,
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_configure)
NOTE: package libvmime-0.9.1-r1: task do_configure: Started
ERROR: TaskFailed event exception, aborting
ERROR: Build of
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb
do_configure failed
ERROR: Task 11
(/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_configure) failed with 256
ERROR:
'/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb'
failed
ERROR: Function do_configure failed
NOTE: Task failed: ('function do_configure failed',
'/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/temp/log.do_configure.29165')
ERROR: Logfile of failure stored in:
/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/temp/log.do_configure.29165
Log data follows:
| automake (GNU automake) 1.11.1
| Copyright (C) 2009 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tromey@redhat.com>
| and Alexandre Duret-Lutz <adl@gnu.org>.
| AUTOV is 1.11
| NOTE: Executing autoreconf --verbose --install --force
--exclude=autopoint -I
/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/libvmime-0.9.1/m4/
-I/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal-1.11
-I
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal
| autoreconf: Entering directory `.'
| autoreconf: configure.in: not using Gettext
| autoreconf: running: aclocal -I
/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/libvmime-0.9.1/m4/
-I
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal-1.11
-I
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal
-I
/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/libvmime-0.9.1/m4/
-I
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal-1.11
-I
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal
--force
|
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal/libpcap.m4:40:
warning: underquoted definition of AC_LBL_C_INIT_BEFORE_CC
|
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal/libpcap.m4:40:
run info '(automake)Extending aclocal'
|
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal/libpcap.m4:40:
or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
| autoreconf: configure.in: tracing
| autoreconf: running: libtoolize --copy --force
| libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `autotools'.
| libtoolize: copying file `autotools/ltmain.sh'
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to
configure.in and
| libtoolize: rerunning libtoolize, to keep the correct libtool macros
in-tree.
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
|
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal/libpcap.m4:40:
warning: underquoted definition of AC_LBL_C_INIT_BEFORE_CC
|
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal/libpcap.m4:40:
run info '(automake)Extending aclocal'
|
/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal/libpcap.m4:40:
or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
| autoreconf: running:
/home/ppeimany/overo-oe/tmp/sysroots/i686-linux/usr/bin/autoconf
--include=/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/libvmime-0.9.1/m4/
--include=/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal-1.11
--include=/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal
--force --warnings=cross
| autoreconf: running:
/home/ppeimany/overo-oe/tmp/sysroots/i686-linux/usr/bin/autoheader
--include=/home/ppeimany/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/libvmime-0.9.1-r1/libvmime-0.9.1/m4/
--include=/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal-1.11
--include=/home/ppeimany/overo-oe/tmp/sysroots/armv7a-angstrom-linux-gnueabi/usr/share/aclocal
--force --warnings=cross
| autoreconf: running: automake --foreign --add-missing --copy
--force-missing --warnings=cross
| automake: unknown warning category `cross'
| configure.in:75: installing `autotools/compile'
| configure.in:77: required file `autotools/config.rpath' not found
| autoreconf: automake failed with exit status: 1
| FATAL: autoreconf execution failed.
| ERROR: Function do_configure failed
NOTE: package libvmime-0.9.1-r1: task do_configure: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of
/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb
do_configure failed
ERROR: Task 11
(/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb,
do_configure) failed with 256
ERROR:
'/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb'
failed
ERROR:
'/home/ppeimany/overo-oe/org.openembedded.dev/recipes/libvmime/libvmime_0.9.1.bb'
failed
prev parent reply other threads:[~2011-03-01 19:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-28 14:17 QA issues with libvmime Nathan Harris
2011-02-28 18:52 ` Tom Rini
2011-02-28 20:48 ` Nathan Harris
2011-02-28 22:24 ` Khem Raj
2011-03-01 13:51 ` Nathan Harris
2011-03-01 18:59 ` Khem Raj
2011-03-01 19:43 ` Nathan Harris [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D6D4C4D.4080005@eoimaging.com \
--to=nharris@eoimaging.com \
--cc=openembedded-devel@lists.openembedded.org \
--cc=raj.khem@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.