From: Gary Thomas <gary@mlbassoc.com>
To: v sailaja <vsailub4u@gmail.com>
Cc: poky@yoctoproject.org
Subject: Re: got error while trying to pull the krb5 package into poky
Date: Wed, 02 Mar 2011 04:50:18 -0700 [thread overview]
Message-ID: <4D6E2EFA.2060207@mlbassoc.com> (raw)
In-Reply-To: <AANLkTikfVT=RbM7EdTE2Ua4OeX8x-+dNff8Owk1Gvipb@mail.gmail.com>
On 03/02/2011 04:35 AM, v sailaja wrote:
> Hi Lianhao,
>
> There are *krb5-dev-1.6.3-r6.core2.rpm* and *krb5-dbg-1.6.3-r6.core2.rpm* in /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
> But there is*no specific rpm on krb5* like *krb5-1.6.3-r6.rpm*.
>
> Again its showing an error as follows:
>
> _*error:*_
>
> readhdr: 2781 2.267168 MB 0.206626 secs
> | hdrload: 194461 256.103876 MB 1.118980 secs
> | hdrget: 3861605 0.000000 MB 6.181097 secs
> | *Processing krb5...
> | Unable to find package krb5!
> | ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
> ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>, do_rootfs) failed with 1
> ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>' failed
>
>
> I am facing the same problem with some more packages like *xcb-proto*
>
> Processing xcb-proto...
> | *Unable to find package xcb-proto!*
> | ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.16360')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed
> ERROR: Task 191 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb>, do_rootfs) failed with 1
> ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb>' failed.
What recipe/package is including xcb-proto? As far as I can see, this is a developmental
header only package. The only uses I could find were for xcb-proto-native
Similarly, there are only the -dev and -dbg variants of this package built (it's been
this way for many months at least). Here's what I have from a fully working build:
$ ls /local/p60_poky/tmp/deploy/ipk/*/xcb-proto*
/local/p60_poky/tmp/deploy/ipk/armv7a/xcb-proto-dbg_1.6-r0_armv7a.ipk
/local/p60_poky/tmp/deploy/ipk/armv7a/xcb-proto-dev_1.6-r0_armv7a.ipk
>
> Hi SAI,
>
> Does the “bitbake krb5” succeed? If it does, the rpm file it generated should be under the directory tmp/deploy/rpm/core2 if you set MACHINE to atom-pc in conf/local.conf. Or
> you may check at the directory “/home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms”, the RPM file is actually created here and later gets
> copied to tmp/deploy/rpm.
>
> Best Regards,
>
> Lianhao
>
> *From:*v sailaja [mailto:vsailub4u@gmail.com <mailto:vsailub4u@gmail.com>]
> *Sent:* Tuesday, March 01, 2011 6:46 PM
> *To:* Lu, Lianhao; Tian, Kevin; poky@yoctoproject.org <mailto:poky@yoctoproject.org>
> *Subject:* got error while trying to pull the krb5 package into poky
>
> Hi,
>
> I tried with the following
>
>
> bitbake krb5 -c cleanall
> bitbake krb5
> But again I am getting the same error and krb5 rpm file is not generated at tmp/deploy/rpm.
>
>
> The value is
>
> *PACKAGE_CLASSES ?= "package_rpm package_ipk"*
>
> *
> error:*
> Generating solve db for /home/sailaja/poky-chrome/build/tmp/deploy/rpm/atom-pc...
> | total: 1 0.000000 MB 0.871674 secs
> | order: 1 0.000000 MB 0.090471 secs
> | fingerprint: 537 0.007286 MB 0.081155 secs
> | install: 278 0.000000 MB 0.179576 secs
> | dbadd: 278 0.000000 MB 0.081411 secs
> | dbget: 8678 1.128312 MB 0.016757 secs
> | dbput: 5035 2.213572 MB 0.020290 secs
> | readhdr: 2781 2.267168 MB 0.206626 secs
> | hdrload: 194461 256.103876 MB 1.118980 secs
> | hdrget: 3861605 0.000000 MB 6.181097 secs
> | *Processing krb5...
> | Unable to find package krb5!
> | ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
> ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>, do_rootfs) failed with 1
> ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>' failed
>
>
>
> Please help me in finding the solution.
> Any help would be greatly apprecited.
>
> Thanks & Regards,
> SAI
>
>
>
>
>
>
> Hi SAI,
>
> Please try the following to rebuild the krb5 to see if the rpm is generated:
>
> -bitbake krb5 -c cleanall
>
> -bitbake krb5
>
> This should generate the rpm file under the directory of “tmp/deploy/rpm”.
>
> b.t.w. what’s the value set to the variable PACKAGE_CLASSES in your conf/local.conf?
>
> Best Regards,
>
> Lianhao Lu
>
>
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
prev parent reply other threads:[~2011-03-02 11:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-01 10:45 got error while trying to pull the krb5 package into poky v sailaja
2011-03-01 16:05 ` Mark Hatle
2011-03-02 4:45 ` Lu, Lianhao
2011-03-02 11:35 ` v sailaja
2011-03-02 11:45 ` Richard Purdie
2011-03-02 14:24 ` v sailaja
2011-03-02 14:35 ` Gary Thomas
2011-03-02 14:40 ` Mark Hatle
2011-03-04 5:38 ` v sailaja
2011-03-09 4:59 ` v sailaja
2011-03-09 5:18 ` embedded.yogesh
2011-03-02 11:50 ` Gary Thomas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D6E2EFA.2060207@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=poky@yoctoproject.org \
--cc=vsailub4u@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.