From: Jens Axboe <jaxboe@fusionio.com>
To: "hch@infradead.org" <hch@infradead.org>
Cc: Vivek Goyal <vgoyal@redhat.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 07/10] fs: make generic file read/write functions plug
Date: Fri, 4 Mar 2011 14:40:09 +0100 [thread overview]
Message-ID: <4D70EBB9.302@fusionio.com> (raw)
In-Reply-To: <20110304132551.GA2407@infradead.org>
On 2011-03-04 14:25, hch@infradead.org wrote:
> On Fri, Mar 04, 2011 at 02:22:21PM +0100, Jens Axboe wrote:
>> Good catch, we need to modify that logic. If the task is currently
>> plugged, it should not dispatch until blk_finish_plug() is called.
>> Essentially SYNC will not control dispatch. Will allow us to clean up
>> that logic, too.
>
> <broken-record-mode>
>
> Time to use the opportunity to sort out what the various bio/request
> flags mean.
>
> REQ_UNPLUG should simply go away with the explicit stack plugging.
> What's left for REQ_SYNC? It'll control if the request goes into the
> sync bucket and some cfq tweaks. We should clearly document what it
> does.
Yes, REQ_UNPLUG goes away, it has no meaning anymore since the plugging
is explicitly done by the caller.
With REQ_SYNC, lets make the sync/async thing apply to both reads and
writes. Right now reads are inherently sync, writes are sometimes
(O_DIRECT). So lets stop making it more murky by mixing up READ and
SYNC.
> REQ_META? Maybe we should finally agree what it does and decide if it
> should be used consistenly. Especially the priority over REQ_SYNC in
> cfq still looks somewhat odd, as does the totally inconsequent use.
For me it was primarily a blktrace hint, but yes it does have prio boost
properties in CFQ as well. I'm inclined to let those stay the way they
are. Not sure we can properly call it anything outside of a hint that
these IO have slightly higher priority, at least I would not want to
lock the IO scheduler into to something more concrete than that.
--
Jens Axboe
next prev parent reply other threads:[~2011-03-04 13:40 UTC|newest]
Thread overview: 158+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-22 1:17 [PATCH 0/10] On-stack explicit block queue plugging Jens Axboe
2011-01-22 1:17 ` [PATCH 01/10] block: add API for delaying work/request_fn a little bit Jens Axboe
2011-01-22 1:17 ` [PATCH 02/10] ide-cd: convert to blk_delay_queue() for a short pause Jens Axboe
2011-01-22 1:19 ` David Miller
2011-01-22 1:17 ` [PATCH 03/10] scsi: convert to blk_delay_queue() Jens Axboe
2011-01-22 1:17 ` [PATCH 04/10] block: initial patch for on-stack per-task plugging Jens Axboe
2011-01-24 19:36 ` Jeff Moyer
2011-01-24 21:23 ` Jens Axboe
2011-03-10 16:54 ` Vivek Goyal
2011-03-10 19:32 ` Jens Axboe
2011-03-10 19:46 ` Vivek Goyal
2011-03-16 8:18 ` Shaohua Li
2011-03-16 17:31 ` Vivek Goyal
2011-03-17 1:00 ` Shaohua Li
2011-03-17 3:19 ` Shaohua Li
2011-03-17 9:44 ` Jens Axboe
2011-03-18 1:55 ` Shaohua Li
2011-03-17 9:43 ` Jens Axboe
2011-03-18 6:36 ` Shaohua Li
2011-03-18 12:54 ` Jens Axboe
2011-03-18 13:52 ` Jens Axboe
2011-03-21 6:52 ` Shaohua Li
2011-03-21 9:20 ` Jens Axboe
2011-03-22 0:32 ` Shaohua Li
2011-03-22 7:36 ` Jens Axboe
2011-03-17 9:39 ` Jens Axboe
2011-01-22 1:17 ` [PATCH 05/10] block: remove per-queue plugging Jens Axboe
2011-01-22 1:31 ` Nick Piggin
2011-03-03 21:23 ` Mike Snitzer
2011-03-03 21:27 ` Mike Snitzer
2011-03-03 22:13 ` Mike Snitzer
2011-03-04 13:02 ` Shaohua Li
2011-03-04 13:20 ` Jens Axboe
2011-03-04 21:43 ` Mike Snitzer
2011-03-04 21:50 ` Jens Axboe
2011-03-04 22:27 ` Mike Snitzer
2011-03-05 20:54 ` Jens Axboe
2011-03-07 10:23 ` Peter Zijlstra
2011-03-07 19:43 ` Jens Axboe
2011-03-07 20:41 ` Peter Zijlstra
2011-03-07 20:46 ` Jens Axboe
2011-03-08 9:38 ` Peter Zijlstra
2011-03-08 9:41 ` Jens Axboe
2011-03-07 0:54 ` Shaohua Li
2011-03-07 8:07 ` Jens Axboe
2011-03-08 12:16 ` Jens Axboe
2011-03-08 20:21 ` Mike Snitzer
2011-03-08 20:27 ` Jens Axboe
2011-03-08 21:36 ` Jeff Moyer
2011-03-09 7:25 ` Jens Axboe
2011-03-08 22:05 ` Mike Snitzer
2011-03-10 0:58 ` Mike Snitzer
2011-04-05 3:05 ` NeilBrown
2011-04-11 4:50 ` NeilBrown
2011-04-11 4:50 ` NeilBrown
2011-04-11 9:19 ` Jens Axboe
2011-04-11 10:59 ` NeilBrown
2011-04-11 11:04 ` Jens Axboe
2011-04-11 11:26 ` NeilBrown
2011-04-11 11:37 ` Jens Axboe
2011-04-11 12:05 ` NeilBrown
2011-04-11 12:11 ` Jens Axboe
2011-04-11 12:36 ` NeilBrown
2011-04-11 12:48 ` Jens Axboe
2011-04-12 1:12 ` hch
2011-04-12 8:36 ` Jens Axboe
2011-04-12 12:22 ` Dave Chinner
2011-04-12 12:28 ` Jens Axboe
2011-04-12 12:41 ` Dave Chinner
2011-04-12 12:58 ` Jens Axboe
2011-04-12 13:31 ` Dave Chinner
2011-04-12 13:45 ` Jens Axboe
2011-04-12 14:34 ` Dave Chinner
2011-04-12 21:08 ` NeilBrown
2011-04-13 2:23 ` Linus Torvalds
2011-04-13 11:12 ` Peter Zijlstra
2011-04-13 11:23 ` Jens Axboe
2011-04-13 11:41 ` Peter Zijlstra
2011-04-13 15:13 ` Linus Torvalds
2011-04-13 17:35 ` Jens Axboe
2011-04-12 16:58 ` hch
2011-04-12 17:29 ` Jens Axboe
2011-04-12 16:44 ` hch
2011-04-12 16:49 ` Jens Axboe
2011-04-12 16:54 ` hch
2011-04-12 17:24 ` Jens Axboe
2011-04-12 13:40 ` Dave Chinner
2011-04-12 13:48 ` Jens Axboe
2011-04-12 23:35 ` Dave Chinner
2011-04-12 16:50 ` hch
2011-04-15 4:26 ` hch
2011-04-15 6:34 ` Jens Axboe
2011-04-17 22:19 ` NeilBrown
2011-04-17 22:19 ` NeilBrown
2011-04-18 4:19 ` NeilBrown
2011-04-18 4:19 ` NeilBrown
2011-04-18 6:38 ` Jens Axboe
2011-04-18 7:25 ` NeilBrown
2011-04-18 8:10 ` Jens Axboe
2011-04-18 8:10 ` Jens Axboe
2011-04-18 8:33 ` NeilBrown
2011-04-18 8:42 ` Jens Axboe
2011-04-18 8:42 ` Jens Axboe
2011-04-18 21:23 ` hch
2011-04-22 15:39 ` hch
2011-04-22 16:01 ` Vivek Goyal
2011-04-22 16:10 ` Vivek Goyal
2011-04-18 21:30 ` hch
2011-04-18 22:38 ` NeilBrown
2011-04-20 10:55 ` hch
2011-04-18 9:19 ` hch
2011-04-18 9:40 ` [dm-devel] " Hannes Reinecke
2011-04-18 9:40 ` Hannes Reinecke
2011-04-18 9:47 ` Jens Axboe
2011-04-18 9:46 ` Jens Axboe
2011-04-11 11:55 ` NeilBrown
2011-04-11 12:12 ` Jens Axboe
2011-04-11 22:58 ` hch
2011-04-12 6:20 ` Jens Axboe
2011-04-11 16:59 ` hch
2011-04-11 21:14 ` NeilBrown
2011-04-11 22:59 ` hch
2011-04-12 6:18 ` Jens Axboe
2011-03-17 15:51 ` Mike Snitzer
2011-03-17 18:31 ` Jens Axboe
2011-03-17 18:46 ` Mike Snitzer
2011-03-18 9:15 ` hch
2011-03-08 12:15 ` Jens Axboe
2011-03-04 4:00 ` Vivek Goyal
2011-03-08 12:24 ` Jens Axboe
2011-03-08 22:10 ` blk-throttle: Use blk_plug in throttle code (Was: Re: [PATCH 05/10] block: remove per-queue plugging) Vivek Goyal
2011-03-09 7:26 ` Jens Axboe
2011-01-22 1:17 ` [PATCH 06/10] block: kill request allocation batching Jens Axboe
2011-01-22 9:31 ` Christoph Hellwig
2011-01-24 19:09 ` Jens Axboe
2011-01-22 1:17 ` [PATCH 07/10] fs: make generic file read/write functions plug Jens Axboe
2011-01-24 3:57 ` Dave Chinner
2011-01-24 19:11 ` Jens Axboe
2011-03-04 4:09 ` Vivek Goyal
2011-03-04 13:22 ` Jens Axboe
2011-03-04 13:25 ` hch
2011-03-04 13:40 ` Jens Axboe [this message]
2011-03-04 14:08 ` hch
2011-03-04 22:07 ` Jens Axboe
2011-03-04 23:12 ` hch
2011-03-08 12:38 ` Jens Axboe
2011-03-09 10:38 ` hch
2011-03-09 10:52 ` Jens Axboe
2011-01-22 1:17 ` [PATCH 08/10] read-ahead: use plugging Jens Axboe
2011-01-22 1:17 ` [PATCH 09/10] fs: make mpage read/write_pages() plug Jens Axboe
2011-01-22 1:17 ` [PATCH 10/10] fs: make aio plug Jens Axboe
2011-01-24 17:59 ` Jeff Moyer
2011-01-24 19:09 ` Jens Axboe
2011-01-24 19:15 ` Jeff Moyer
2011-01-24 19:22 ` Jens Axboe
2011-01-24 19:29 ` Jeff Moyer
2011-01-24 19:31 ` Jens Axboe
2011-01-24 19:38 ` Jeff Moyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D70EBB9.302@fusionio.com \
--to=jaxboe@fusionio.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.