Re: [Xenomai-help] Illegal instruction running trivial-periodic on ARM with 2.5.5.2/2.6.33

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

Eric Cohen wrote:
> Hello, I am attempting to evaluate Xenomai and am running into an
> illegal instruction when I try to run trivial-periodic.  I am running
> Xenomai 2.5.5.2 with kernel 2.6.33.5-x3 on a Beagleboard.  Kernel and
> Xenomai were cross compiled with CodeSourcery 4.4.1.  Upon boot I can
> see /proc/xenomai/*.  Attempting to run trivial-periodic results in
> the following output:
> 
> Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
> (modprobe xeno_nucleus?)
> 
> Note that CONFIG_XENO_OPT_PERVASIVE is in fact enabled, and nucleus is
> built into the kernel.  Running in GDB, trivial-periodic receives
> SIGILL (illegal instruction) and exits.  I get the following
> backtrace:
> 
> #0  0x40022498 in xeno_bind_skin_opt () from /usr/xenomai/lib/libxenomai.so.0
> #1  0x00000000 in ?? ()
> 
> And the disassembly around the PC is:
> 
>    0x4002247c <+124>:   movw    r0, #555        ; 0x22b
>    0x40022480 <+128>:   mov     r6, r5
>    0x40022484 <+132>:   mov     r1, r8
>    0x40022488 <+136>:   mov     r2, #1610612743 ; 0x60000007
>    0x4002248c <+140>:   mov     r3, #3
>    0x40022490 <+144>:   mov     r4, r7
>    0x40022494 <+148>:   svc     0x009f0042
> => 0x40022498 <+152>:   ldr     r12, [sp, #2140]        ; 0x85c
>    0x4002249c <+156>:   cmp     r12, #0
>    0x400224a0 <+160>:   beq     0x4002246c <xeno_bind_skin_opt+108>
>    0x400224a4 <+164>:   mov     r2, r0
>    0x400224a8 <+168>:   mvn     r1, #84 ; 0x54
>    0x400224ac <+172>:   mov     r0, r11
>    0x400224b0 <+176>:   bl      0x400220d8
>    0x400224b4 <+180>:   cmn     r0, #85 ; 0x55
> 
> The other example programs result in a SIGILL in exactly the same place.
> 
> Does anyone have any ideas or suggestions?

I would say you have incompatible ABI settings for kernel-space and
user-space.


-- 
                                                                Gilles.