From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4D74C725.1080603@domain.hid> Date: Mon, 07 Mar 2011 12:53:09 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <4D7252E1.9050000@domain.hid> <4D725BF5.70707@domain.hid> In-Reply-To: <4D725BF5.70707@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Runtime error on PXA270 for branch 'for-ipipe-2.6.35-arm' in 'ipipe-gch.git' List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Michael Bernhard Cc: Xenomai help Gilles Chanteperdrix wrote: > Michael Bernhard wrote: >> Hello! >> >> I'm trying to get running the ipipe patch on a 2.6.35 kernel. I've seen >> that Gilles was working on that port lately so I gave it a try. >> >> The kernel is booting fine. However init does not continue and the >> NETDEV watchdog triggers: > > Hi, > > please use Xenomai mailing lists, not my private address. > > Does the following path help? > > diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c > index 4769217..975dfe0 100644 > --- a/arch/arm/plat-pxa/gpio.c > +++ b/arch/arm/plat-pxa/gpio.c > @@ -286,7 +286,7 @@ void __init pxa_init_gpio(int mux_irq, int start, > int end, set_wake_t fn) > > for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) { > set_irq_chip(irq, &pxa_muxed_gpio_chip); > - set_irq_handler(irq, handle_level_irq); > + set_irq_handler(irq, handle_edge_irq); > set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); > } > > > Ping? Could you test this patch? -- Gilles.