From: Stephan Raue <mailinglists@openelec.tv>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: "K, Mythri P" <mythripk@ti.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: Re: [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4
Date: Fri, 11 Mar 2011 01:07:07 +0100 [thread overview]
Message-ID: <4D7967AB.1030404@openelec.tv> (raw)
In-Reply-To: <1299768675.2017.230.camel@deskari>
Hi Tomi,
Am 10.03.2011 15:51, schrieb Tomi Valkeinen:
> On Thu, 2011-03-10 at 08:45 -0600, Stephan Raue wrote:
>> Hi,
>>
>> if i try this patch series the boot stops after (seeing via serial console):
>>
>> Starting kernel ...
>>
>> Uncompressing Linux... done, booting the kernel.
>>
>> without this patch series i can see the boot to th OS. I am using this
>> patches on top of
>>
>> http://gitorious.org/linux-omap-dss2/linux/commits/master
>>
>> Do i anything wrong or do i use a wrong git repo (the patches apply
>> cleanly)? Her my kernel config: http://fpaste.org/9Esw/
> Ah, I guess you hit one yet unsolved problem on on omap4: VENC register
> access fails.
>
> Can you try switching this off: CONFIG_OMAP2_DSS_VENC.
>
> I need to make some quick hack to get VENC disabled on OMAP4 until we
> find the solution for this.
>
> Tomi
>
thanks, this helps to boot the kernel. but now i get:
[ 3.281127] Power Management for TI OMAP4.
[ 3.291870] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.312957] clock: disabling unused clocks to save power
[ 3.318695] mmc0: new high speed SDHC card at address 0001
[ 3.325622] mmcblk0: mmc0:0001 00000 7.46 GiB
[ 3.333618] mmcblk0: p1 p2
[ 3.335540] Unhandled fault: imprecise external abort (0x1406) at 0xffed6a6a
[ 3.335571] Internal error: : 1406 [#1] PREEMPT SMP
[ 3.335571] last sysfs file:
[ 3.335571] Modules linked in:
[ 3.335571] CPU: 0 Not tainted (2.6.38-rc8 #1)
[ 3.335601] PC is at dss_clk_disable_no_ctx+0x0/0xa4
[ 3.335632] LR is at omap_dispc_register_isr+0xa4/0xcc
[ 3.335632] pc : [<c066b4f8>] lr : [<c066c65c>] psr: 20000093
[ 3.335632] sp : ef845e20 ip : c0e6ffd0 fp : c09fbb90
[ 3.335632] r10: c0f774ac r9 : 00000088 r8 : c0673644
[ 3.335662] r7 : 0004000e r6 : a0000093 r5 : 00000000 r4 : 00000000
[ 3.335662] r3 : f08c4000 r2 : f08c4000 r1 : 0006964a r0 : 00000003
[ 3.335662] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 3.335693] Control: 10c5387d Table: 8000404a DAC: 00000015
[ 3.335693] Process swapper (pid: 1, stack limit = 0xef8442f8)
[ 3.335693] Stack: (0xef845e20 to 0xef846000)
[ 3.335693] 5e20: 00001887 c0f78588 00000000 c0f78588 00000044 00000001 eed70b40 c06735d8
[ 3.335723] 5e40: c0f785f4 f0a00000 c0f785b4 60000013 00000080 ef814000 c09fd630 00000000
[ 3.335723] 5e60: ef814698 ef814264 eeeae6e0 00000003 eeeae400 c067a528 00000000 c082f738
[ 3.335723] 5e80: eeeae6e0 c09fd628 ef814694 eee26fc0 ef845ed8 c0537e70 00000001 bf600000
[ 3.335754] 5ea0: f0a00000 02800280 000001e0 00000080 00000000 00000000 00000000 02800000
[ 3.335754] 5ec0: 00ff01e0 c0538780 ef848000 c0830e38 ef804ac4 00000003 ef8ad4c0 00000000
[ 3.335784] 5ee0: c09fd664 c09fd630 c09fd664 c0a0f540 c0a0f540 00000000 00000000 c09e776c
[ 3.335784] 5f00: 00000000 c06bc470 c06bc45c c06bb670 00000000 c09fd630 c09fd664 c0a0f540
[ 3.335784] 5f20: 00000000 c06bb794 c0a0f540 ef845f38 c06bb72c c06ba8c4 ef804a5c ef8ae054
[ 3.335815] 5f40: c0a0f540 c0a0f540 eee24680 c0a19328 00000000 c06baf78 c092c550 00000480
[ 3.335815] 5f60: ef845f50 c0a0f540 c002d640 c09e7680 c001edd8 00000000 c09e776c c06bb9dc
[ 3.335815] 5f80: 00000000 c002d624 c002d640 c09e7680 c001edd8 00000000 c09e776c c001edfc
[ 3.335845] 5fa0: ef844000 c041e644 c0933524 00000198 c0a01b8c c09e7680 c09e7770 c002d624
[ 3.335845] 5fc0: c002d640 c09e7680 c09e7770 00000002 c09e776c c0008b2c 00000004 00000000
[ 3.335876] 5fe0: c00089d4 c0423f1c 00000013 00000000 00000000 c0423f1c faffd73f 00100e0a
[ 3.335876] [<c066b4f8>] (dss_clk_disable_no_ctx+0x0/0xa4) from [<c0f78588>] (num_managers+0x0/0x4)
[ 3.335906] Code: e8bd8070 c0f77254 c0954a8a 000218de (e92d4038)
[ 3.335906] ---[ end trace b7597bb719140d9a ]---
[ 3.335906] note: swapper[1] exited with preempt_count 2
[ 3.335937] Kernel panic - not syncing: Attempted to kill init!
[ 3.588439] CPU1: stopping
[ 3.591308] [<c0428bec>] (unwind_backtrace+0x0/0xe4) from [<c041e2d8>] (do_IPI+0xe4/0x15c)
[ 3.600036] [<c041e2d8>] (do_IPI+0xe4/0x15c) from [<c08314cc>] (__irq_svc+0x4c/0xcc)
[ 3.608184] Exception stack(0xef861b60 to 0xef861ba8)
[ 3.613494] 1b60: c04582a0 ef861ba8 ef861b98 00000000 ef860000 00000282 00000002 ef861c00
[ 3.622100] 1b80: 00000001 ef860000 00000001 0000000a 005b820e ef861ba8 c04582a0 c04582a4
[ 3.630706] 1ba0: 60000113 ffffffff
[ 3.634399] [<c08314cc>] (__irq_svc+0x4c/0xcc) from [<c04582a4>] (__do_softirq+0x6c/0x250)
[ 3.643096] [<c04582a4>] (__do_softirq+0x6c/0x250) from [<c0458988>] (irq_exit+0x58/0xb0)
[ 3.651733] [<c0458988>] (irq_exit+0x58/0xb0) from [<c041e29c>] (do_IPI+0xa8/0x15c)
[ 3.659790] [<c041e29c>] (do_IPI+0xa8/0x15c) from [<c08314cc>] (__irq_svc+0x4c/0xcc)
[ 3.667938] Exception stack(0xef861c00 to 0xef861c48)
[ 3.673248] 1c00: 00000001 00000001 00000000 ef84a800 00000025 00000001 c09fe67c c0a32340
[ 3.681854] 1c20: c6b2f9f3 00000001 00000001 00000036 60000113 ef861c48 c0452e18 c0452e20
[ 3.690460] 1c40: 60000113 ffffffff
[ 3.694152] [<c08314cc>] (__irq_svc+0x4c/0xcc) from [<c0452e20>] (vprintk+0x3d8/0x468)
[ 3.702484] [<c0452e20>] (vprintk+0x3d8/0x468) from [<c082d2cc>] (printk+0x18/0x24)
[ 3.710571] [<c082d2cc>] (printk+0x18/0x24) from [<c0533800>] (rescan_partitions+0x1e4/0x47c)
[ 3.719543] [<c0533800>] (rescan_partitions+0x1e4/0x47c) from [<c050f7a8>] (__blkdev_get+0x230/0x2f4)
[ 3.729248] [<c050f7a8>] (__blkdev_get+0x230/0x2f4) from [<c050fa20>] (blkdev_get+0x1b4/0x2bc)
[ 3.738342] [<c050fa20>] (blkdev_get+0x1b4/0x2bc) from [<c06410bc>] (register_disk+0xdc/0x158)
[ 3.747406] [<c06410bc>] (register_disk+0xdc/0x158) from [<c064121c>] (add_disk+0xe4/0x28c)
[ 3.756225] [<c064121c>] (add_disk+0xe4/0x28c) from [<c0762dd8>] (mmc_blk_probe+0x2a8/0x2f4)
[ 3.765106] [<c0762dd8>] (mmc_blk_probe+0x2a8/0x2f4) from [<c075bab8>] (mmc_bus_probe+0x14/0x18)
[ 3.774383] [<c075bab8>] (mmc_bus_probe+0x14/0x18) from [<c06bb670>] (driver_probe_device+0xc8/0x184)
[ 3.784088] [<c06bb670>] (driver_probe_device+0xc8/0x184) from [<c06ba5f8>] (bus_for_each_drv+0x4c/0x84)
[ 3.794067] [<c06ba5f8>] (bus_for_each_drv+0x4c/0x84) from [<c06bb4c4>] (device_attach+0x68/0x94)
[ 3.803405] [<c06bb4c4>] (device_attach+0x68/0x94) from [<c06bae28>] (bus_probe_device+0x24/0x40)
[ 3.812774] [<c06bae28>] (bus_probe_device+0x24/0x40) from [<c06b91bc>] (device_add+0x394/0x524)
[ 3.822021] [<c06b91bc>] (device_add+0x394/0x524) from [<c075be24>] (mmc_add_card+0xf4/0x134)
[ 3.830993] [<c075be24>] (mmc_add_card+0xf4/0x134) from [<c075e7e8>] (mmc_attach_sd+0x158/0x1dc)
[ 3.840270] [<c075e7e8>] (mmc_attach_sd+0x158/0x1dc) from [<c075b7f0>] (mmc_rescan+0x204/0x264)
[ 3.849426] [<c075b7f0>] (mmc_rescan+0x204/0x264) from [<c0468790>] (process_one_work+0x2d8/0x510)
[ 3.858856] [<c0468790>] (process_one_work+0x2d8/0x510) from [<c046aa60>] (worker_thread+0x1c0/0x2b8)
[ 3.868591] [<c046aa60>] (worker_thread+0x1c0/0x2b8) from [<c046e3e4>] (kthread+0x80/0x88)
[ 3.877288] [<c046e3e4>] (kthread+0x80/0x88) from [<c0423f1c>] (kernel_thread_exit+0x0/0x8)
see also: http://paste.pocoo.org/show/351648/
if i remove this patchserie again it boots, see here: http://paste.pocoo.org/show/351650/
thanks
Stephan
next prev parent reply other threads:[~2011-03-11 0:07 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-10 10:44 [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4 Mythri P K
2011-03-10 10:44 ` [PATCH v5 01/10] OMAP4 : DSS2 : Add display type HDMI to DSS2 Mythri P K
2011-03-10 10:44 ` [PATCH v5 02/10] OMAP4 : DSS2 : HDMI: Select between HDMI VENC clock source Mythri P K
2011-03-10 10:44 ` [PATCH v5 03/10] OMAP4 : DSS2 : HDMI: Dispc gamma enable set/reset function for TV Mythri P K
2011-03-10 10:44 ` [PATCH v5 04/10] OMAP4 : DSS2 : HDMI: HDMI driver header file addition Mythri P K
2011-03-10 10:44 ` [PATCH v5 05/10] OMAP4 : DSS2 : HDMI: HDMI driver addition in the DSS Mythri P K
2011-03-10 10:44 ` [PATCH v5 06/10] OMAP4 : DSS2 : HDMI: HDMI panel " Mythri P K
2011-03-10 10:44 ` [PATCH v5 07/10] OMAP4 : DSS2 : HDMI: Add makefile and kconfig changes to enable HDMI in OMAP4 Mythri P K
2011-03-10 10:44 ` [PATCH v5 08/10] OMAP4 : DSS : HDMI: Call to HDMI module init to register driver Mythri P K
2011-03-10 10:44 ` [PATCH v5 09/10] OMAP4 : HDMI : Add HDMI structure in the board file for OMAP4 SDP Mythri P K
2011-03-10 10:44 ` [PATCH v5 10/10] OMAP4 : HDMI : Add HDMI structure in the board file for OMAP4 PANDA Mythri P K
2011-03-15 4:23 ` Tomi Valkeinen
2011-03-15 14:47 ` John S
2011-03-10 14:04 ` [PATCH v5 08/10] OMAP4 : DSS : HDMI: Call to HDMI module init to register driver Tomi Valkeinen
2011-03-10 13:59 ` [PATCH v5 07/10] OMAP4 : DSS2 : HDMI: Add makefile and kconfig changes to enable HDMI in OMAP4 Tomi Valkeinen
2011-03-10 13:58 ` [PATCH v5 05/10] OMAP4 : DSS2 : HDMI: HDMI driver addition in the DSS Tomi Valkeinen
2011-03-10 13:52 ` [PATCH v5 03/10] OMAP4 : DSS2 : HDMI: Dispc gamma enable set/reset function for TV Tomi Valkeinen
2011-05-05 13:50 ` Laurent Pinchart
2011-03-10 13:49 ` [PATCH v5 02/10] OMAP4 : DSS2 : HDMI: Select between HDMI VENC clock source Tomi Valkeinen
2011-03-10 13:48 ` [PATCH v5 01/10] OMAP4 : DSS2 : Add display type HDMI to DSS2 Tomi Valkeinen
2011-03-10 16:53 ` Aaro Koskinen
2011-03-10 13:44 ` [PATCH v5 00/10] OMAP4 : DSS2 : HDMI support on OMAP4 Tomi Valkeinen
2011-03-10 14:45 ` Stephan Raue
2011-03-10 14:51 ` Tomi Valkeinen
2011-03-11 0:07 ` Stephan Raue [this message]
2011-03-11 6:16 ` K, Mythri P
2011-03-11 7:24 ` Tomi Valkeinen
2011-03-11 13:23 ` Hiremath, Vaibhav
2011-03-14 8:35 ` Hiremath, Vaibhav
2011-03-14 9:24 ` Tomi Valkeinen
2011-03-14 9:35 ` Hiremath, Vaibhav
2011-03-16 6:45 ` Tomi Valkeinen
2011-03-16 6:47 ` Hiremath, Vaibhav
2011-03-11 7:12 ` Tomi Valkeinen
2011-03-11 8:43 ` Stephan Raue
2011-03-11 13:22 ` Tomi Valkeinen
2011-03-11 16:18 ` Stephan Raue
2011-03-11 18:27 ` Tomi Valkeinen
2011-03-11 18:42 ` Stephan Raue
2011-03-12 6:51 ` K, Mythri P
2011-03-13 14:32 ` Stephan Raue
2011-03-13 16:20 ` Stephan Raue
2011-03-16 6:51 ` Tomi Valkeinen
2011-03-16 10:53 ` K, Mythri P
2011-03-16 10:59 ` Tomi Valkeinen
2011-03-16 23:49 ` Stephan Raue
2011-03-17 11:11 ` Tomi Valkeinen
2011-03-17 16:20 ` Janorkar, Mayuresh
2011-03-17 20:16 ` Stephan Raue
2011-03-17 21:13 ` Stephan Raue
2011-03-17 21:34 ` Stephan Raue
2011-03-18 3:45 ` Tomi Valkeinen
2011-03-18 5:43 ` Anand Gadiyar
2011-03-18 6:17 ` Gadiyar, Anand
2011-03-18 5:43 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-18 5:52 ` Anand Gadiyar
2011-03-14 10:37 ` Jan, Sebastien
2011-03-15 4:06 ` Tomi Valkeinen
2011-03-15 4:38 ` K, Mythri P
2011-03-10 15:06 ` Tomi Valkeinen
2011-03-11 8:24 ` K, Mythri P
2011-03-16 8:32 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D7967AB.1030404@openelec.tv \
--to=mailinglists@openelec.tv \
--cc=linux-omap@vger.kernel.org \
--cc=mythripk@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.